Congratulations on purchasing the Roami Progressive Mobility Aid (PMA).
Roami is a revolutionary articulating walking frame that adapts to your
needs as you walk over different surfaces and terrains. Roami functions as
a walker, rollator and stair climber in one. Roami also offers infinite angle
adjustment to assist with posture, gait, and stability. Mobilate hopes that
Roami will help increase your mobility and improve quality of life.
SAFETY NOTE: Like any mobility device, the physical and mental
capabilities of the user must match the capabilities of the product. Misuse
or misapplication of this product could result in significant injury or death.
Before using the Roami PMA:
• Talk to your health care professional and make sure the Roami PMA is the
right mobility aid for you.
• Review this User Manual carefully. Pay extra attention to the safety
information on pages 6 and 7.
• Important safety information is also found throughout the manual and
highlighted by this symbol:
• If you are happy and satisfied with Roami, please let us know. We would
love to hear from you. If you aren’t completely satisfied, or have any
questions, you can leave your comments with Mobilate at:
+1.423.651.0137
www.roamiwalkers.com
technicalsupport@mobilateus.com
Above is the safety alert symbol. It is used to alert you to important
safety information. To avoid the risk of accidents, personal injury and
death, read and obey all safety messages that follow this symbol.
Before using the Roami PMA:
• Make sure the Roami PMA is the right product for you.
• Be sure to consult with a health care professional. This product may
not be suitable for use by persons having high risk conditions.
For example:
• If they are not mentally coherent (including from
medication),
• Do not have the cognitive ability to follow the instructions,
• Are physically unstable or do not have the strength to utilize
a walker or similar device,
• If they exceed the recommended weight limit
(300 lbs./ 130 kg),
• If they have any other condition that would impede their
ability to properly use Roami such as frequent dizziness or
disorientation.
• Make sure you read, understand and follow all instructions before assembly
and use. This includes instructions for optional equipment.
• Proper assembly, use and product maintenance are also required to help
assure your safety.
• The instructional videos are intended to demonstrate how the Roami PMA
can be used. View the videos after you read the User Manual.
• If you still have questions after reviewing the User Manual or demonstration
videos:
• Contact your health care professional to discuss medical issues.
• Contact Mobilate for any questions regarding assembly, set-up and
maintenance of the product.
Important safety rules when using the Roami PMA:
• Be aware of the surrounding surfaces when using the Roami PMA - such as
For safety and stability, your Roami
PMA must be properly assembled
before any use. Do NOT use unless
it is properly assembled.
Your Roami PMA comes almost fully
assembled. You will need to simply
install (affix) the rear legs and adjust
the height on front and back legs
prior to first use.
If you are unable to properly
assemble Roami, please contact the
manufacturer, Mobilate at:
Slide the Lower Leg (15) assembly inside the Rear Leg Upper (11) making sure
to keep the Spring Pin (14b) inside the leg facing to the inside of the Rear Leg
Upper (11) to align with the adjustment holes when fitted.
Once the Lower Leg (15) is slid inside the Rear Leg Upper (11) slide the Leg
Cuff (13) up onto the end of the Rear Leg Upper until it is all the way home
and well seated. Hold the Leg Cuff (13) in position on the Rear Leg Upper (11)
and tighten the locking screw to secure the Leg Cuff (13) in position.
5.1.4
Adjust height of rear Lower Legs by depressing the Spring Pin (14b) and
sliding the leg up or down. You should adjust so that Spring Pins are in the
same hole number on all 4 legs.
Don’t worry about adjusting the overall product height yet, that will be
addressed later in the manual.
To start check that the Fold Lock (5)
is set to fold position (horizontal). If
it is, proceed to step 5.2.3
If not proceed to 5.2.2
5.2.2
If the Fold Lock (5) is in the vertical position, press the Safety Button (4),
squeeze the Lever (3) and while holding the Lever (3) turn the Fold Lock (5)
90° to the horizontal position. Repeat for the other handle. The Roami PMA
is now free to unfold.