MOBASE ELECTRONICS SEKS AM08TX, SEKS AM08RX User Manual

Title : NO. : SCE-0807

Information Document

Information Document

Date : 2008.07.15

2. PRODUCT SPECIFICATION

2.1 Scope of Remote Keyless Entry in BCM system.

21.1 Key part : TRANSMITTER is inside of the remote key, and it
sends the rolling code to the RECEIVER by radio frequency.

2.1.2 RECEIVER : It receives the rolling code and decodes that,
thereafter RECEIVER drives the actuator.

2.2 Specification

2.2.1 TRANSMITTER

Rated supply voltage DC 3V

Operating voltage range DC 2.5 ~ 3.2V

Operating temperature range

Storage temperature range

Modulation FSK
Frequency 315.00MHz

Electric field strength 75.623dBuV/m (315.00MHz)

Battery life 2 Year(10Times/Day)(Lithium 3V 1EA)

2.2.2 RECEIVER

Operating Temperature

Max Humidity 95%

Standby Current

ITEM

Code Rolling Code(Hopping Algorithm)

Item

SPECIFICATION

-20 ~+60℃

-30 ~ 80℃

Specification

DC 12V Rated Supply Voltage

DC 9 ~ 16V Operating Voltage

- 30 ~ + 80℃

Below than 6mA

(in alarm setting condition)

Title : NO. : SCE-0807

Information Document

Information Document

Date : 2008.07.15

2.3 Operating summary

① TRANSMITTER's button is pushed.
② TRANSMITTER sends the code by radio frequency.
③ RECEIVER gets the code and decodes it.
④ RECEIVER judges the code whether it is right code or not.
⑤ RECEIVER checks door lock or unlock or PANIC state.

⑥ RECEIVER drives the actuator.
⑦ RECEIVER drives the horn

2.3.1 LOCK & UNLOCK & PANIC

① If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.

② If PANIC button is pushed for more than 1 sec, then
TRANSMITTER sends the PANIC.

2.4 Caution

① Danger of explosion if battery is incorrectly replaced.
② Replace only with the same or equivalent type recommended by the manufacturer.
③ Dispose of used batteries according to the manufacturer's instructions.

Page 5 of 11