MO Smart Bode Analyzer, MO-1501-M User Manual

USER MANUAL
[DON’T FORGET TO CHANGE THE MODEL IN THE ABOVE
PICTURE]
Smart Body Analyzer
Model: MO-1501-M
Free App
Date: 2016.02
Smart Body Analyzer
Model: MO-1501-M
Table of Contents
Introduction
Warnings
Product Description
Instructions
About Body Fat and BMI
Care and Maintenance
Problem Solving
Product Specifications
Questions and Answers
FCCStatement
Introduction
Thank you for purchasing the MO Smart Body Analyzer (MO-1501-M). You will now be able to effortlessly measure, track and share health and fitness information. This user manual will guide you through the setup process and provide key information about the scale itself. Please read it completely and keep it handy for future reference.
The scale uses the method of Bioelectrical Impedance Analysis (BIA) to estimate body fat, bone mass, water content and muscle mass. It sends a harmless amount of electriccurrent into the body, then estimates, from the measured impedance of the body, the percentage of body fat, bone mass, water content and muscle mass. It is intended for adult use in the home.
All rights reserved to More Technology International Inc.
PRODUCT LIST
Scale ×1
E-INK screen
Usb charging cable ×1
Reset needle ×1
User manual ×1
Quick start guide ×1
(includeMetalpatchMagnetbase) ×1
Warnings
1.Do not use this device if: You are acutely or chronically ill, sufferingfrom a disease or taking medications that affect your water levels. The accuracy of readings for these patients has not been verified.
2.Any information provided by this device is in no way meant to treat, cure or prevent any disease or illness f rom happening.
3.Specific medical advice should be obtained from a physician.
4. Do not disassemble the scale as incorrect handling may cause injury.
5. Do not step on the scale when your body or feet are wet, especially after bathing or showering to prevent slipping.
This MO scale is equipped with a data transmission function. It may emit electromagnetic
energy so as to perform its intended function. Nearby portable and mobile RF communicationequipments can affect the performance of the MO scale. Portable and mobile RF communicationequipments can affect the accuracy of this MO scale.
Warning that the use of accessories, transducers and cables other than those specified by the
manufacturer of the MO scale as replacement- parts for internal components, may result in increased EMISSIONS or decreased IMMUNITY of the MO.
The distance between the scale and the Bluetooth should be reasonably close, between 3 to 30
feet. Please ensure that there are no obstacles between the scale and the Bluetooth so as to obtain a quality connection. To avoid interference, other electronics devices (particularly those with Bluetooth®)should be kept at least 3 feet away from the scale.
Normal Mode
1.Do not use on pregnant women. The result is inaccurate and effects on the fetus are unknown.
2.Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or over-hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc.
3.The Normal mode is not suitable for people who wear electronic medical devices including pacemaker.In these cases,please use “safe mode”.
Safe Mode
1.Under safe mode,the scale will operate as a basic weight-measuring scale.
2.Please use the switch at the bottom of the scale to turn on/off the safe mode.
3.There will be n o electric current under “safe mode”.
1.ITO glass 2.LED light 3.Sensor 4.Mode switch 5.Charging port
6.WiFi 7.indoor/outdoor/BMI 8.Indoor/outdoor temperature 9. Weight/time 10.Body fat 11.BMI /Humidity13.E-INK screen 14.Power switch 15.Charging port/Reset
[Please change the picture: LED screen -> E-INK screen, remove PM2.5]
Instructions
Turn on the screen
Take out the screen.Press until the screen is turned on
Tips:
1.when the screen automatically turns off, please try re-charging it.
2.Please allow 4-6 hours to fully charge the screen.
3.Normally, the screen can show time, indoor/outdoor temperature and humidity.
Make sure you are on the right mode
Safe mode Normal mode
The default setup is on “Normal mode” Please switch to “Safe mode”if you are pregnant.
Download and install the App
You can find the App in App store by searching “MO Health”.
MOSCALE REQUIREMENTS
The MO Scale is designed to be used with the following mobile devices:
•iOS
iPhone®, iPad®, iPod Touch®, iPad mini® using iOS 8.1 and above
Loading...
+ 11 hidden pages