MMF POS VX810, VX820 User Manual

Transaction Terminal Stand (P/N:225Transaction Terminal Stand (P/N:225--75917591--04) 04)

Quick Installation Instructions

Designed for Verifone® VX810

2” Height Stand

P/N:225P/N:225--75917591--0404

Thumb
Screw

TopTop

Cable
Management Hole

Basic Overview

Note: Images are not to scale.

Designed for
Verifone® VX810

SPECS
Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :

•30⁰ Tilt= 4 ¾” high

•45⁰ Tilt= 5 ½” high

Pole Diameter: 2”
Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient

cable access and routing.

Color: Black

Holes to secure
Verifone®
VX810
terminal to

BottomBottom

stand (Screws
included in kit)

Clearance Cable Slot

Re p l a c e m e n t Pa r t s

Thumb Screw
P/N: 225-76901-04

INSTALLATION

1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface. (Screws are not
included as they need to suit your specific desktop or
platform thickness) .

2. Mount payment terminal to stand by sliding in place,
aligning the two holes in the top & bottom of the
Verifone® VX810 unit to the two holes of the stand’s
mounting plate.

3. Secure the terminal by tightening the two button head
cap screws behind the mounting plate using the Allen
Wrench provided in the kit.

4. Secure the stand’s tilt adjustment as desired by
tightening the two side thumb screws on the
mounting plate on each side of the stand.

5. Make cable connections as needed . Guide cable
connections down and out through the bottom
opening.

TOOLS AND HARDWARE REQUIRED

• One (1) Allen Wrench is included with kit to tighten the
button head cap screws from behind the mounting plate.

• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.

• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).

For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com

TTS-11 Inst. Sheet (11-6-2011)

COPYRIGHT BY MMF POS
COMPANY, WHEELING, IL