Short VESA Wall Mount (P/N: 225Short VESA Wall Mount (P/N: 225--7614176141--0404) )
Thumb
4.
Guide
cable connections down and out through the bottom
opening
Re p l a c e m e n t Pa r t s
VESA Mounting
Quick Installation Instructions
Short VESA Wall Mount
P/N:225P/N:225--7614176141--0404
Cable
Management
Hole
Thumb Screw
To Wall
Screws
75mm & 100mm
Pattern
P/N: 225-76140-04
Basic Overview
Note: Images are not to scale.
SPECS
Rotation: N/A
Overall Height & Tilt Adjustment (without LCD) :
•30⁰ Tilt= 4 ¾” high
•45⁰ Tilt= 5 ½” high
Pole Diameter: 2”
Base Dimensions: 5” x 5”
Maximum Load: Designed for LCD Monitors / touch-screens weighting up
to 30 lbs (13.60kg)
Display: Designed for VESA 75mm or 100mm mounting standard
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient
cable access and routing.
Color: Black
For parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com
INSTALLATION
1. Remove Short VESA Wall Mount from packaging box. Firmly
secure the base of the mount by bolting four (4) screws through the
base plate to a flat wall. (Screws are not included as they need to
suit the specific wall type) .
2. Secure the mounting plate to the back of the flat screen monitor
(LCD) by placing four (4) screws on the corresponding VESA
mounting dimension (75mm or 100 mm).
NOTE: Screws are usually attached to LCD
3. Secure the mount’s tilt adjustment by tightening the two side thumb
screws on the mounting plate on each side of the mount.
if needed.
5. Make cable connections as needed.
TOOLS AND HARDWARE REQUIRED
• NO hardware or tools are included for mounting to
a surface. Hardware will need to suit your specific
wall type and thickness.
• Phillips Head Screwdriver or power drill will be
required to mount stand to wall .
VESA-WALL-MOUNT Inst. Sheet (4-19-2011)
COPYRIGHT BY MMF POS COMPANY,
WHEELING, IL
Loading...