MMF POS VESA WALL MOUNT, RIGHT ANGLE, TILT User Manual

Right Angle VESA Wall Mount

P/N:225-76142-04

Right Angle VESA Wall Mount (P/N: 225-76142-04)

Quick Installation Instructions

Side View Back View

INSTALLATION

1. Remove Right Angle VESA Wall Mount from packaging box.
Remove the one screw holding Cable Cover Plate in place on top
base of Right Angle Mount. Hold on to the screw for later
installation in Step 5.

75mm & 100mm

VESA Mounting

Pattern

Cable
Management Hole

SPECS

Cable
Cover

Basic Overview

Note: Images are not to scale.

To Wall

Thumb
Screws

Screw

Cable
Cover
Plate

Cable
Management Hole

Rotation: 180⁰

Parts

Overall Height: 11.5” from base to top
Tilt Adjustment (without LCD): Up to 45⁰ Tilt

Thumb Screw
P/N: 225-76140-04

Pole Diameter: 2”
Base Dimensions: 5” x 5”

Replacement

Maximum Load: Designed for LCD Monitors / touch-screens weighting up
to 30 lbs (13.60kg) . Max Weight is dependant on anchoring system.

Display: Designed for VESA 75mm or 100mm mounting standard
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient

cable access and routing.

Color: Black

2. Firmly secure the base of the mount by bolting four (4) screws
through the base plate to a flat wall surface. Ensure the mount is
firmly anchored to wall. (Screws are not included as they need to
suit the specific wall type) .

3. Secure the VESA compatible mounting plate to the back of the flat
screen monitor (LCD) by placing four (4) screws on the
corresponding VESA mounting dimension (75mm or 100 mm).

NOTE: Screws are usually attached to LCD

4. Secure the mount’s tilt adjustment by tightening the two side thumb
screws on the VESA mounting plate on each side of the mount.

5. Guide cable connections down and out through the bottom
opening, if needed. If routing cable through wall, a cover has been
provided for a clean look. Replace the Cable Cover Plate with the
one (1) screw provided.

TOOLS AND HARDWARE REQUIRED

• NO hardware or tools are included for mounting to

a surface. Hardware will need to suit your specific
wall type and thickness.

• Phillips Head Screwdriver or power drill will be

required to mount stand to wall .

For parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com

VESA Right Angle WALL MOUNT Inst. Sheet (8-1-2011)
COPYRIGHT BY MMF POS
WHEELING, IL