VESA Counter Stand - Fixed Height with Cable Management
04)
(P/N:MMF-STND02-04)
Quick Installation Instructions
Tilt
Capability
VESA
Mounting
Plate
Clearance
Cable Slot
SPECS
Base: Suitable for any 10”-22” LCD Monitor,
All-In-One Monitor
Weight Capacity: 45 lbs
Basic Overview
INSTALLATION
1. Remove stand from packaging box. Place on top of
counter or if desired, firmly secure the base by bolting
three(3) screws from the bottom of a flat counter surface
through the base plate . (Screws are not included as they
need to suit your specific desktop or platform thickness) .
2. Mount any 10”-22” LCD Monitor, touch screen , or All-InOne Monitor to stand by aligning the VESA Pattern Holes
(75mm x 75mm or 100mm x 100mm ) on back of LCD or
case to the stand’s mounting plate.
3. Adjust the stand’s tilt adjustment as desired.
4. Guide cable connections down and out through the cable
opening.
Back ViewSide View
5. Make cable connections as needed.
Under-counter
Mounting Holes
Clearance
Cable Slot
Overall Height : 9.05 inch high
Construction: ABS and sheet-nickel
Finish: UV Paint- Sandblast
Cable Management: Designed with opening for easy
and convenient cable access and routing.
Color: Black
For additional accessories and other mounting solutions, contact your supplier or visit our website at www.mmfpos.com
Front View
TOOLS AND HARDWARE REQUIRED
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
Counter Stand (PN: MMF-STND02Inst. Sheet (5-28-2013)
MMF POS, WHEELING, IL
Loading...