MMF POS MediaPLUS Cash Drawer User Manual

MMF POS

•

Position the cash drawer and remove any packing tape or guards from the

MediaPLUSMediaPLUS™™

Quick Installation Instructions

Currency “Tuffy Till”

(Shown in image: US
Configuration 5 Bills / 5 Coins)

Inner Drawer

Figure 1

Media storage: more
than 250 cubic inches of
space.

Media
Slots

Lock

Placement of Cash Drawer

• Prepare a location for the cash drawer by selecting a secured, leveled surface
that is no smaller than the cash drawer.

• Operating temperature should be controlled at 20°F to 100°F (-7°C to 37°C)

tray.

• It is recommended to anchor the cash drawer to counter surface or mounting
under counter at all times to prevent any injuries if cash drawer is over loaded.

Printer-Driven Interface Connection

• Connect one side of the corresponding printer-specific MMF RJ-12 Cable to the
interface connection located under the cash drawer. The end of the cable that has
a label with the MMF cable part number will plug into the Cash Drawer and the end
that has a label that reads: “Connect to Printer” would plug into the receipt printer.

• Follow the set-up instructions from the printer manufacturer to properly connect the
cash drawer to the receipt printer.

3 Position / 4 Function Lock Functionality (Fig.2):

• Locked Closed: Close and latch the
drawer. Place the key into the lock and
rotate the key counter clockwise to the
9 o’clock position. Remove the key.
The cash drawer is now locked
mechanically and electronically.

• Electronically On-Line: This cash drawer is
designed to open electronically through a
receipt printer or through a computer via
USB or Serial Connection . Make sure that the

interface cable is properly connected to the cash drawer. Place the key
into the lock and rotate the key to the Electronically On-Line position (12
o’clock).Remove the key. The cash drawer is now ready to accept the
electronic signal from the receipt printer and allow the drawer to open.

• Manually Open: Place the key into the lock and rotate the key clockwise
to the 2 o’clock position. The drawer will begin to come out. Release the
rotational force from the key and the key will return to the 12 o’clock
position. The key can now be removed and the drawer is open.

• Locked Open: Place the key into the lock and rotate the key clockwise to
the 3 o’clock position. The drawer will open. The key will try to return to
the 12 o’clock position because of the return spring in the lock. Hold the
key in the 3 o’clock position and pull the key out of the lock. The drawer
is now locked open. This position will keep the drawer open to show that
the currency tray is removed. Forcing the cash drawer closed when the
drawer is in the locked open position may cause damage.

For other Upgradeable Interface Connections (USB, PoweredUSB, USB-Serial
Emulation, Multi Serial, and Standard (Hard Wired)Serial):

Follow the procedures detailed in the respective Upgradeable Interface User Manual which
can be downloaded from www.mmfpos.com/Support/User Manuals.

NOTE: For full list of additional accessories and/or replacement parts contact your supplier or visit our website at http://www.mmfpos.com

For more information on the MediaPLUS Cash Drawer visit www.mmfpos.com or for FREE Technical Support or call 1-800-769-1954.

MediaPLUS Quick Inst. Sheet
P/N:531-7599-00
Last Rev.7-18-11

MMF POS

the drawer front. A click sound will be heard during the first inch of movement.

•

Verify correct position of the lock. To open electronically the lock would

the drawer front. A click sound will be heard during the first inch of movement.

•

Verify correct position of the lock. To open electronically the lock would

MediaPLUS

MediaPLUSMediaPLUS

MediaPLUS

MediaPLUSMediaPLUS

MediaPLUSMediaPLUS

Quick Installation Instructions

Inner Drawer Removal

• Open the cash drawer and remove the currency tray. Pull the drawer forward
as far as possible. A black lever should now be visible inside the track of each
slide (see Figure 3). Push the black lever downward on the right side and pull
the right side of the drawer out of the cabinet approximately 1/2“.

• Next pull the black lever upward on the left side and pull the left side of the
drawer out of the cabinet approximately 1/2". Place one hand on the front lip
of the cabinet and grasp the cash drawer with the other hand and pull the
cash drawer all the way out of the cabinet.

Inner Drawer Installation

• Place the drawer lock in the Electronically On-Line position. Align and guide
the drawer slide members into the right and left chassis slide members. Begin
pushing the drawer into the cabinet by applying a moderate amount of force to

This indicates that the drawer slide member has locked onto the chassis slide
member. Continue applying a moderate force and push the drawer
completely into the cabinet until it has latched. Place the key into the lock and
test the function of the drawer manually.

Preventive Maintenance:

• Lubricate the slides and latch mechanism periodically. Inspection

and lubrication will vary based on operating conditions.

• Remove any debris from slides, if present.

• A thin film of lithium-based grease or a few drops of general
purpose oil should be maintained on the ball bearing tracks of the
slides

Troubleshooting:
Cash Drawer does not open electronically

• Consult the documentation or manuals for your particular printer for the

proper open codes.

• Verify the correct end of the RJ-12 printer cable is connected to the cash

drawer as well as the printer.

need to be in the 12 o’clock position.

• If using Upgradeable Interfaces (via USB or Serial Port) consult

troubleshooting tips detail in the user manual for the corresponding
Interface.

Cash Drawer does not open manually or electronically

• Make sure all packing tapes were removed from the cash tray and that

no foreign objects are obstructing the cash tray from opening.

NOTE: For replacement parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com

Please visit www.mmfpos.com for FREE Technical Support or call 1-800-769-1954.

Warnings/Safety Instructions:

• Avoid breaking coin rolls on the drawer front or the currency tray.

• Do not clean roller bearings or slides with any water or substance
cleaners; use a lint-free fabric to wipe old grease and/or debris.

MediaPLUS Quick Inst. Sheet
P/N: 531-7599-00
Last Rev.7-18-11