Transaction Terminal Stands (Transaction Terminal Stands (P/N:225P/N:225--75857585--0404) )
each side of the stand.
Quick Installation Instructions
Designed for MagTek® IPAD®
2” Height Stand
P/N:225P/N:225--75857585--0404
Screw
Basic Overview
Note: Images are not to scale.
SPECS
Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :
•30⁰ Tilt= 4 ¾” high
•45⁰ Tilt= 5 ½” high
Pole Diameter: 2”
Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient
cable access and routing.
Color: Black
INSTALLATION
Clearance Cable SlotThumb
Mounting plate
holes to secure
MagTek®
IPAD® terminal
to stand
(Screws
included in kit)
Thumb
Screw
Thumb Screw
P/N: 225-76140-04
Re p l a c e m e n t Pa r t s
1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface. (Screws are not
included as they need to suit your specific desktop or
platform thickness) .
2. Mount payment terminal to stand by aligning the two
holes in the bottom of the MagTek® unit to the two
holes of the stand’s mounting plate.
3. Secure the terminal by tightening the two 4-40 x 0.25”
button head cap screws behind the mounting plate
using the Allen Wrench provided in the kit.
4. Secure the stand’s tilt adjustment by tightening the
two side thumb screws on the mounting plate on
5. Guide cable connections down and out through the
bottom opening.
6. Make cable connections as needed.
TOOLS AND HARDWARE REQUIRED
• One (1) Allen Wrench is included with kit to tighten the
4-40 x 0.25” button head cap screws from behind the
mounting plate.
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
For parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com
TTS-04 Inst. Sheet (2-23-2011)
COPYRIGHT BY MMF POS
COMPANY, WHEELING, IL
Loading...