MMF POS L4100, L4150, L4200, L5300 User Manual

MMF POS

Transaction Terminal Stands (P/N:225758004 & P/N:225758104)

Quick Installation Instructions

Front ViewFront View

Captive Slide Standoff

2” Height Stand
P/N:225758004

Back View Back View

Fixed Height Stand

P/N:225758104

Thumb Screw

SPECS

Rotation: 180°around display pole
Height: 2” inch high pole (+/- 3.5”) or counter height (+/- 2.5”)
Tilt Adjustment: +/-45°Pole
Diameter: 2” inches (Base)
Construction: Steel
Finish: Textured powder coat
Maximum Load: Designed for Hypercom® L4100/L4150/L4200 &

Verifone® MX800 Family mounting patterns.

Cable Management: Designed with openings for easy and convenient

cable access and routing.

Color: Black

“L” Locking Bracket

Socket head cap
screws 6-32

Basic Overview

Note: Images are not to scale.

Thumb Screw
P/N: 225-76140-04

Kit:
One (1) “L” Locking Bracket
Two (2) Socket head cap screws 6-32

Replacement Parts

One (1) Allen wrench
P/N: 225-76903-04

INSTALLATION

1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface.

2. Loosen up (but, do not remove) the Socket head cap
screws from the “L” Locking Bracket using the Allen
Wrench provided in the kit until it can slide up & down
easily.

3. Mount payment terminal to stand by aligning and
hooking in place the mounting holes of the terminal to
the Captive Slide Standoff on the stand.

4. Secure the terminal by sliding and tightening the “L”
Locking Bracket located in the back of t he stand
using the Allen Wrench provided in the kit.

5. Secure the stand’s tilt adjustment by tightening the
two side thumb screws on the mounting plate on
each side of the stand.

6. Guide cable connections down and out through the
bottom opening.

7. Make cable connections as needed.

TOOLS AND HARDWARE REQUIRED

• One (1) Allen Wrench is included with kit to adjust the
Socket head cap screws (6-32) for the “L” locking br acket.

• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.

• Phillips Head Screwdriver or pow er drill will be required
to mount stand to surface (if necessary).

For parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com

TTS-02 Inst. Sheet (7-7-2010)

COPYRIGHT BY MMF POS
COMPANY, WHEELING , IL