MMF POS iPP320, iPP350 User Manual

2” Height Stand

P/N:225-7589-04

Transaction Terminal Stand (P/N:225-7589-04)

Quick Installation Instructions

Designed for Ingenico® iPP320 or iPP350 Handheld

INSTALLATION

Security

Bracket

Back View

Counter

Base

1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface. (Screws are not
included as they need to suit your specific desktop or
platform thickness) .

2. Mount payment terminal to stand by sliding in place,
aligning the two holes in the top of the Ingenico®
iPP320 / iPP350 unit to the two holes of the stand’s
mounting plate. Also, make sure the hook on the
bottom of the mounting plate is attached to the
bottom slot under the Ingenico® ipp320 unit.

3. Secure the terminal by placing the security bracket
on top of the terminal and tightening the two button
head cap screws behind the mounting plate using the
Allen Wrench provided in the kit.

Holes to
secure
Ingenico®
ipp320
terminal
to stand
(Screws
included
in kit)

Clearance

Cable

Slot

Thumb
Nut

Cable

Management

Hole

Hook

Front View

Basic Overview

Note: Images are not to scale.

Designed
for
Ingenico®
iPP320 &

SPECS

iPP350

Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :

•30⁰ Tilt= 4 ¾” high

•45⁰ Tilt= 5 ½” high

Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient

cable access and routing.

Color: Black

For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com

Thumb Nut
P/N: 821-1540-04

Re p l a c e m e n t P a r t s

4. Secure the stand’s tilt adjustment as desired by
tightening the side thumb nut on the side of the
stand.

5. Make cable connections as needed . Guide cable
connections down and out through the bottom
opening.

TOOLS AND HARDWARE REQUIRED

• One (1) Allen Wrench is included with kit to tighten the
button head cap screws from behind the mounting plate.

• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.

• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).

TTS-09 Inst. Sheet (10-1-2013) 531995300

COPYRIGHT BY MMF POS COMPANY,
WHEELING, IL