
INSTALLATION & MAINTENANCE MANUAL
TRKxxxx

GENERAL INSTRUCTIONS
These instructions should be read carefully and retained after installation by the
end-user for future reference and maintenance.
These instructions should be used to aid the installation of the TRKx x track
products.
ACCESSORY INSTALLATION
• The track accessories are provided with earth connection points on both sides
• When offering the accessory to the track, verify which tab needs to be removed
• To remove the tab, grasp firmly with a pair of pliers and lever back. The tab should snap
off cleanly. The side of the track with the earthing conductor has a polarity groove on top
of the track to help identify which way round to insert the accessories (see Fig. 1)
• Locate the accessory into the track and insert fully

Polarity groove
Earth conductor
Fig. 1
• The track connectors TRKC1xx / TRKFC1xx / TRKRA1xx / TRKT1xx / TRKX1xx also have
the two earth tabs and can be used as power feeds and rewired if required
Remove one earth tab
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life.
Check local authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products of solvents which
may damage the product.

INTERNATIONAL
CONTACT DETAILS
WARRANTY
This product has a warranty of 2 years from the date of purchase. Failure to install this
product in accordance with the current edition of the IEE Wiring Regulations (BS7671),
improper use, or removal of the batch code will invalidate the warranty. If this product
should fail within its warranty period, it should be returned to the place of purchase for a
free of charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.
INTERNATIONAL
CONTACT DETAILS
101
ML Accessories Limited LU5 4LT
www.mlaccessories.co.uk
AKJUN21_V2