ML Accessories 5FTT5KIT User guide

INSTALLATION & MAINTENANCE MANUAL

5FTT5KIT

GENERAL INSTRUCTIONS

These instructions should be read carefully and retained after installation by the
end user for future reference and maintenance.
These instructions should be used to aid installation of the following product:
5FTT5KIT

INSTALLATION

• Unscrew the cable retainer from each of the ceiling fixings (see Fig. 1)

Fig. 1

INSTALLATION & MAINTENANCE MANUAL

• Fix the ceiling fixings to the ceiling using suitable screws and plugs (not included). The
fixings should be the same distance apart as the holes in the luminaire (see Fig. 2)

Fig. 2

• Thread the 2m cables through the cable retainers, and screw the cable retainers back
into the ceiling fixings (see Fig. 3)

Fig. 3

• Align each pair of securing plates and pass
them through the mounting hole on the
luminaire, one in each corner (see Fig. 4)

• Open out the securing plates to form a
cross on the inside of the luminaire
(see Fig. 5)

Fig. 4

Fig. 5

• Push each cable hanging from the
ceiling fixings into one of the adjustment
connectors until it appears out of the hole
in the side (see Fig. 6)

• The height of the luminaire can be raised by pulling more cable through the adjustment
connector; it can be lowered by pushing on the spring-loaded end of the adjustment
connector to release

• Once the desired height has been achieved the cable may be trimmed to within 10mm of
the hole in the adjustment connector

Fig. 6

GENERAL

This product should be recycled in the correct manner when it reaches the end of its life.
Check local authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which
may damage the product.

WARRANTY

INTERNATIONAL

CONTACT DETAILS

INTERNATIONAL

CONTACT DETAILS

This product has a warranty of 1 year from date of purchase. Failure to install this product
in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper
use, or removal of the batch code will invalidate the warranty. If this product should fail
within its warranty period, it should be returned to the place of purchase for a free of
charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.

ML Accessories Limited LU5 4LT
www.mlaccessories.co.uk

INTERNATIONAL

CONTACT DETAILS

52

DCJUL21_V2