Translation from the original document • 2021441-20ABDE-B • 12/09/2016
O7EMPF...
OIEMPF...
OPEKBP...
OIEKBP...
OPEKBP...
OIEKBP...
2021441-20ABBE-Ben-GB
Operating and display elements
1 2 3
on
off
start
stop
°C/F
hmin
Prog.
g r i l l
cooksoft
start
auto
Eco Control
M
KN
ab
c
d
e
f
g
hjln
ikmo
a "Cooking temperature/level"
i "Auto start" indicator light
display
b "Cooking temperature/level"
j "grill" button
button
c "Cooking time" displayk "grill" indicator light
d "Cooking time" buttonl "Soft" button
e "On Off" buttonm "Soft" indicator light
f "Start Stop" buttonn "Cook" button
g "Start Stop" indicator lighto "Cook" indicator light
h "Auto start" button
Image: Handwheel for manual tilting
Image: Control knob for motorised tilting
2Operating instructions
2021441-20ABBE-B
Manufacturer
MKN Maschinenfabrik Kurt Neubauer GmbH & Co. KG
Halberstädter Strasse 2a
38300 Wolfenbüttel
Germany
Phone +49 5331 89-0
Fax +49 5331 89-280
Internet www.mkn.eu
Copyright
All rights to text, graphics and pictures in this documentation are held by MKN Maschinenfabrik Kurt
Neubauer GmbH & Co. KG. Distribution or duplication is only permitted with the prior written consent
of MKN.
Copyright by MKN Maschinenfabrik Kurt Neubauer GmbH & Co. KG.
The operating instructions are part of the unit and contain information:
•On safe operation,
•On cleaning and care,
•On remedies in case of faults.
Be aware of the following notes and adhere to them:
•Read the operating instructions completely before operating the
unit for the first time.
•Make the operating instructions available to the operator at all
times at the operating site of the unit.
•Insert any supplements from the manufacturer.
•Keep the operating instructions throughout the service life of the
unit.
•Pass on the operating instructions to any subsequent operator of
the unit.
Target group The target group of the instruction manual is the operator, who is
entrusted with the operation, cleaning and care of the unit.
Figures All figures in this manual are intended as examples. Discrepancies
between these and the actual unit can arise.
2021441-20ABBE-B
7Operating instructions
Introduction
1.1.1 Explanation of signs
DANGER
Imminent threat of danger
Failure to comply will lead to death or very severe injuries.
WARNING
Possible threat of danger
Failure to comply can lead to death or very severe injuries.
CAUTION
Dangerous situation
Failure to comply can lead to slight or moderately severe
injuries.
ATTENTION
Physical damage
Failure to comply can cause physical damage.
Notes for better understanding and operation of the unit.
Symbol / signMeaning
•Listing of information.
Action steps, which can be performed
in any sequence.
1.
2.
Action steps, which must be performed
in the specified sequence.
Result of an action performed or
additional information about it.
8Operating instructions
2021441-20ABBE-B
1.2 Intended use
Introduction
This unit is intended to be used solely for commercial purposes,
particularly in commercial kitchens.
This unit may only be used with suitable accessories and for the
cooking of food.
It is forbidden to use the unit for purposes, which include the
following:
•As set-down area or working surface
•Storing supplies
•Drying cloths, paper or dishes
•As a basin for keeping things warm
•Heating rooms
•For heating cooking utensils on the frying surface
1.3 Warranty
•Heating preserved food
•Heating acids, alkaline solutions or other chemicals
•For smoking fish or meat
•Heating of warmer plates and GN containers
•Heating flammable liquids
•Deep-frying
The use of the unit is prohibited in the following countries:
•USA
•Canada
The warranty is void and safety is no longer assured in the event of:
•Improper conversion or technical modifications of the unit,
•Improper use,
•Incorrect startup, operation or maintenance of the unit,
•Problems resulting from failure to observe these instructions.
2021441-20ABBE-B
9Operating instructions
Safety information
2 Safety information
The unit complies with applicable safety standards. Residual risks
associated with operation or risks resulting from incorrect operation
cannot be ruled out and are mentioned specifically in the safety
instructions and warnings.
The operator must be familiar with regional regulations and observe
them.
Operation During operation, the following group of individuals must be
supervised by an individual who is responsible for safety:
•Individuals with physical, sensory, or mental handicaps, or who
The supervising individual must be familiar with the unit and the risks
associated with it.
Hot surfaces Risk of burns from hot surfaces
•Protect arms and hands by wearing suitable protective gloves.
lack the knowledge and experience to operate the unit properly.
•Do not touch heating elements, hot surfaces or accessories
immediately after use.
•Allow surfaces to cool prior to cleaning.
•Open the lid carefully.
•Remove containers only with suitable protective gloves or
potholders.
Hot liquids Risk of burns from hot liquids
•Protect arms and hands by wearing suitable protective gloves.
•Observe the maximum filling quantity.
Risk of chemical burns from evaporating cleaners
•Follow the instructions of the cleaning agent manufacturer.
Risk of burns from steam
•Protect arms and hands by wearing protective gloves.
•First open the lid slightly and allow the steam to escape. Then
open the lid completely.
•Open the drain valve carefully and empty the unit.
Defective unit Risk of injury from a defective unit
•Disconnect a defective unit from the electric mains.
•Do not operate a defective unit.
•Allow only an authorized technician to repair the unit.
10Operating instructions
2021441-20ABBE-B
Fire prevention Risk of fire from dirt and grease deposits
•Clean the unit when finished using it.
•Do not use the unit as a deep fat fryer.
Risk of fire from overheating
•Observe the unit during operation.
•Observe the maximum filling quantity.
Firefighting
•In the event of a fire, disconnect the unit from the electric mains.
•Close the lid to smother a fire.
•Use a Fire Class F fire extinguisher, never water, to extinguish
grease fires. Other fires, for instance, can be extinguished with fire
extinguishers suitable for Fire Classes A, B, C, CO2 fire
extinguishers or extinguishing media suitable for the fire class
confronted.
Safety information
Unit on casters Risk of injury from a unit on casters
•Move the unit only for cleaning or maintenance.
•Lock casters during operation.
•Only move an empty unit.
Risk of a line breaking if subjected to high tensile load
•Secure the unit with a chain as a strain relief for the power
connection at the installation site so that no tensile load is applied
to the power connection if the unit is moved.
Improper cleaning Risk of chemical burns from cleaning agent
•Follow the instructions of the cleaning agent manufacturer.
•Take appropriate protective measures when handling aggressive
cleaning agents.
Risk of falling on smooth floors
•Keep the floor in front of the unit clean and dry.
2021441-20ABBE-B
11Operating instructions
Safety information
Risk of physical damage from improper cleaning
•Clean the unit after using it.
•Do not clean the unit with a high-pressure cleaner or water jet.
•Do not clean the housing with highly abrasive or chemically
aggressive cleaning agents.
•Do not clean the housing with highly abrasive sponges.
•Follow the instructions of the cleaning agent manufacturer.
•Do not cool shock the unit by cooling it abruptly.
•Use only a stainless steel scraper or stainless steel spatula for
cleaning.
•Remove rust spots with an abrasive.
•Keep the unit free of calcium deposits.
Hygiene Health risk from insufficient hygiene
•Observe applicable regional hygiene regulations.
•Follow the cleaning instructions.
•Observe food processing regulations when keeping food warm.
Improper use Risk of physical damage from improper use
•Do not operate the unit outdoors.
•Use only original accessories.
•Train operators regularly.
•Do not heat food warmer plates or tins of preserved food.
•Observe the unit during operation.
•Do not use the frying surface as a heating surface for pots.
•Do not use or cook any aggressive or caustic substances.
•Operate the unit only by hand.
12Operating instructions
2021441-20ABBE-B
3 Description of the unit
a
b
c
d
e
i
h
g
f
3.1 Overview of the unit
The unit is intended for universal use in commercial kitchens for
cooking food in a pan. Possible uses are cooking, stewing, frying,
braising and boiling.
The pan with drain valve is permanently built-in. The pan with
motorised or manual tilting can be turned in the left and right side
arms, and the bearing of the pivoting point is located right at the front
for optimum pouring.
3.1.1 Floor-standing unit
Description of the unit
2021441-20ABBE-B
Image: Bratt pan with EcoControl
a Lid handlef Equipment leg
b Pang
c Operating elementh Lid hinge
d Drain valvei Lid
e Nameplate
Maximum fill level
mark
13Operating instructions
Description of the unit
a
c
e
f
g
k
j
i
d
b
h
Image: Bratt pan with EcoControl, manual tilting and mixer tap
a Lid handleg Nameplate
b
Maximum fill level
c Operating elementi Mixer tap (optional)
d Panj Lid hinge
e Operating element for
f Spout
markh Equipment leg
tilting
k Lid
14Operating instructions
2021441-20ABBE-B
Description of the unit
a
b
d
e
f
j
i
h
g
c
Image: Bratt pan with EcoControl and motorised tilting
a Lid handlef Nameplate
b Operating elementg Equipment leg
c Panh
d Operating element for
e Spoutj Lid
tilting
Maximum fill level
i Lid hinge
mark
2021441-20ABBE-B
15Operating instructions
Description of the unit
a
c
e
g
f
j
i
h
d
b
3.1.2 Suspended unit
Image: Bratt pan with EcoControl and manual tilting
a Lid handlef Nameplate
b
Maximum fill level
c Operating elementh Suspension mounting
d Pani Lid hinge
e Operating element for
markg Spout
tilting
j Lid
16Operating instructions
2021441-20ABBE-B
3.2 Function of the operating and display elements
1 2 3
°C/F
hmin
Prog.
a
b
c
d
e
on
off
start stop
auto start
grill
Image: Display field
Description of the unit
a Decimal point for "Cooking
temperature/level"
b Decimal point for "Cooking time"e
c
Time display
SymbolOperating/display elementFunction
"On Off" button• Switch on the unit.
"Start Stop" indicator light• Illuminates when the cooking pro-
"Start Stop" button• Start the cooking mode.
"Auto start" indicator light• Flashes when the start time is being
"Auto start" button• Set the start-time preselection.
indicator light
d Indicator light for
display
Status display
• Switch off the unit.
cess is active.
• End the cooking mode.
set.
• Illuminates when the start-time
preselection is active.
heating status
indicator light
2021441-20ABBE-B
"grill" indicator light• Flashes when the temperature for
"Frying" cooking mode is being set.
"grill" button• Select the settings for the "Frying"
• Illuminates when the "Frying" cooking mode is selected.
cooking mode.
17Operating instructions
Description of the unit
soft
cook
1 2 3
°C/F
Prog.
hmin
hmin
SymbolOperating/display elementFunction
"Soft" indicator light• Flashes when the temperature for
the "Soft cooking" mode is being set.
• Illuminates when the "Soft cooking"
mode is selected.
"Soft" button• Select the settings for the "Soft cook-
ing" mode.
"Cook" indicator light• Flashes when the temperature or
level for "Cook" mode is being set.
• Illuminates when the "Cook" mode is
selected.
"Cook" button• Select the settings for the "Cook"
mode.
"Cooking temperature/level" display• Shows the selected level when set-
ting a cooking program.
• Shows the selected cooking temperature for all cooking modes.
Decimal point for "Cooking
• No further function
temperature/level"
Status display
indicator light• Illuminates during the heating phase
when the unit is started.
• Goes out when the unit has reached
the desired continuous cooking level.
Indicator light for
heating status display
• Illuminates when heating is active.
• Goes out when the heating is inact-
ive, for example if the set temperature has been reached.
• Flashes if activation of the unit is interrupted, for example in the case of
a tilted pan (unit with tilting), activated power optimisation system (unit
with power optimisation system) or
pressure build-up (pressurised unit).
"Cooking temperature/level" button• Save the cooking program or select
the saved cooking program.
• Increase the temperature.
• Reduce the temperature.
18Operating instructions
"Cooking time" display• Shows the selected preselection
time or cooking time as the remaining time for the cooking mode in
hours and minutes.
2021441-20ABBE-B
SymbolOperating/display elementFunction
Description of the unit
Time display
The "Cooking time" decimal point
jumps between two positions and
displays either the waiting time
(decimal point on the right) or the
cooking time (decimal point on the left).
"Cooking time" button• Increase the cooking time.
indicator light• Flashes while the preselection time
or cooking time elapses.
• Goes out when the desired time has
elapsed.
• Shows the waiting time before the
start of a cooking program in 10minute increments.
• (Example: 30 minutes)
• Shows the cooking time for a running
cooking program in 1-minute increments.
• (Example: 1 hour and 3 minutes)
• Reduce the cooking time.
3.3 Operating temperature
Cooking modeTemperature
Low-temperature
cooking ("Slow")
Soft cooking ("Soft")
Cooking ("Cook")100°C
Frying ("Grill")50 — 300°C
50 — 100°C
2021441-20ABBE-B
19Operating instructions
Description of the unit
3.4 Fill quantity
The fill quantity depends on the model and pan size.
ModelPan sizeQuantity (l)*
Without tilting2/1 GN77
2/1 GN – 30096
3/1 GN113
3/1 GN – 300143
With tilting2/1 GN65
2/1 GN – 30096
3/1 GN94
3/1 GN – 300143
* Maximum fill quantity in accordance with DIN 18857
20Operating instructions
2021441-20ABBE-B
4 Operating the unit
CAUTION
Risk of burns from hot surfaces
•Protect arms and hands by wearing suitable protective
gloves.
4.1 Initial commissioning
The following work must be carried out before the initial
commissioning:
1. Perform the basic settings (see "Performing basic control
settings").
2. Unit with steel frying surface: Burn-in the frying surface (see
"Burning-in a steel frying surface").