Mk electric MASTERSEAL SENTRYSOCKET DATASHEET

TECHNICAL DATA SHEET

Masterseal

Sentrysocket

1:2

PRODUCT RANGE

RCD protected switchsocket
outlets

30mA Active Control

Single socket 56301 GRY
Single socket 56301 WHI

Double socket 56231 GRY

30mA Passive Control

Double socket 56233 GRY

Compliance with EC Directives,
Standards and approvals

All Sentrysockets comply with the following
EC Directives and are CE marked:

Low Voltage Directive (73/23/EEC)
Electromagnetic Compatibility Directive (89/336/EEC)

Sentrysocket RCD Single Sockets also comply with
the requirements of the following standards:

BS 7288: 1990 (1993)
BS 2011 Part 2.1 Db (Damp Heat - cyclic)
BS 2011 Part 2.1 Ka (Salt mist)
BS EN 50082-1

Sentrysocket RCD Double Sockets comply with
BS 7288: 1990 (1993) and BS EN 61543: 1996 for EMC

Masterseal™ Sentrysocket

Description

Sentrysocket provides a high level of
protection against electrocution and gives
further protection when used with appliances
vulnerable to insulation damage, particularly
when they are in damp environments or
outdoors.

Sentrysocket, incorporating an RCD, is part of
a complete range of fixed and portable wiring
accessories and circuit protection devices
suitable for use in domestic, commercial and
industrial applications.

Active control circuits

Incorporate a ‘Re-set’ mechanism and are
mains failure sensitive, ie they will function
under all the normal conditions expected of
an RCD, but will also trip in the event of a

Features

I Suitable for most residential,

commercial and light industrial
applications.

I Active and passive control circuit

applications

I Comply fully with current Wiring

Regulations

I Double pole switching

®

power cut or a sudden, dramatic reduction in
mains voltage. This makes them ideal for use
where it would be hazardous for equipment
to suddenly energise after return of mains
power, such as use with rotating machinery
and heat developing apparatus.

Passive control circuit

Incorporates a ‘Stay-set’ mechanism and is
mains failure proof, ie it will function under all
the normal conditions expected of an RCD
and will not trip in the event of a power cut.
This makes it suitable for use with freezers or
in inaccessible or unmanned locations.

I Flexible and versatile in use

I Ideal for use with equipment subject to

wet weather or high humidity

I Part of a complete range of MK circuit

protection devices

I They are a.c. and pulsating d.c.

sensitive for residual current

I Enclosure IP56

©2002 MK Electric Limited The Arnold Centre, Paycocke Road, Basildon, Essex SS14 3EA, United Kingdom Tel: [phone] Fax: [phone] email: [e-mail] www.mkelectric.co.uk Edition 06-02

TECHNICAL DATA SHEET

Conduit Entry Centre Lines

72.5

67

36.25

157.5

Masterseal

Sentrysocket

2:2

Dimensions (mm)

Single and double sockets are identical in size and shape.
The following dimensions apply

TECHNICAL SPECIFICATION

Electrical

Rated Voltage:
240V a.c.

Current rating:
13A resistive

Rated tripping current
30mA and 10mA versions

Terminal capacity:

2

3 x 4mm

Physical

Ambient operating temperature:
–5°C to +40°C

IP rating:
IP4X

Max. installation altitude:
2000 metres

175

115

Fixing Dimensions

Masterseal products are suitable for surface mounting only.

80

©2002 MK Electric Limited The Arnold Centre, Paycocke Road, Basildon, Essex SS14 3EA, United Kingdom Tel: [phone] Fax: [phone] email: [e-mail] www.mkelectric.co.uk Edition 06-02