MJX R/C X800 Instruction Manual

ITEM NO.X800

Technical parameter of the hexacopter

Overall height: 45mm

Fuselage Length:210mm

Main Rotor Diameter: 55mm

Gross Weight: about 70.5g

Battery: Li-polymer 3.7V 750mAh

Motor: Coreless motor

Charging Time: about 90 minutes

Introduction

Multi-rotor design insures more stable and powerful performance and make all kinds of 3D
action more easier.
Two remote control ways are available: RC control mode and gravity control mode.
New designed structure makes assembly and maintenance easier.
Adopting 2.4G auto connection technology, scores of hexacopters can be played at the same
time.
Equipped with the newest 6-Axis Gyro control system, this hexacopter has the characteristics
of stable flight and easy operation.
Full charged battery can support 7 minutes steady flight.

Product/spare parts included in this packaging

Manual

Description QTY (pc) Description QTY (pc) Description QTY (pc)

Hexacopter Additional blades

Blade changer

landing gear

1 6

1

1

1

21

1

Remote control USB charger

Screwdriver

2.4G 6-AXIS

3D ROLL GRAVIT Y SENSOR

R/C Hexacopter With 6-Axis Gyro

1

This product is not a toy. It is not applicable for children who are under
14 years old.
Please read this instruction manual carefully before playing and operate
the product according to the manual.
The users are in full charge of proper operating the hexacopter. The
manufacturer and dealers disclaim all responsibility for the damage
caused by misuse.
Keep the small accessories away from the kids to avoid accident.
Keep batteries away from fire or high temperature environment.
When flying the hexacopter, keep it 1~2 meters away from user or others
to avoid injury due to collision.
Not to decompose or modify the product which may cause malfunction
or accident.
Fly the hexacopter within your eye vision for easy and safety control.
Need adult supervision when this hexacopter is being played by children.
Only batteries of the same or equivalent type as recommended are to be
used.
Insert batteries with correct polarity.
Non rechargeable batteries are not to be charged; the transmitter need
6XAA batteries for work.
Do not mix old and new batteries.

Control the function of upward,downward,forward,backward, leftward,
rightward,turn left, turn right and 3D flips & roll of the copter.
Control stick for leftward/rightward flight and left/right turning can be
freely switched according to player's habit.

Adopt microcomputer control remote controller system and 2.4G auto
connection technology, scores of copters can be played at the same
time without any interference.

Flash light
button

Trim C

Trim B

OFF/L/M/H

Light
indicator

Antenna

Trim D

6

Trim A

Aileron/
rudder switch

Right control stick

(Gravity control mode:

Press the right remote

control stick, the remote

control will change from

normal control mode to

gravity control mode.)

Left
control
stick

3D Roll

Function
switch

2

1

3

4

5

6

7

8

9

10

11

Trim C

OFF/L/M/H

Antenna

Trim D

Flash light
button

Aileron/rudder
switch

Left control
stick

Right control
stick

Power
indicator

When the hexacopter keeps flying backward, press this button
until it gains balance.

Trim B

Mode 1: Turn left/turn right fine tuning
Mode 2: Leftward/rightward fine tuning

When the hexacopter keeps flying forward, press this button
until it gains balance.

This is the light switch of the hexacopter. Press it once to turn
on the light and press it once again to turn off the light.

This is the toggle button of MODE 1 and MODE 2. Press the
button, there will be a beep sound, and the remote control mode
can be changed from Mode 1 to Mode 2 or Mode 2 to Mode 1.

This is the power switch and the speed toggle switch of the
remote control. There are 3 flight speed available for choosing.
L is low speed; M is medium speed; H is high speed.

Trim A

The indicator light keeps blinking slowly: the transmitter is not
activated.
The indicator light keeps flashing rapidly: the transmitter is
sending out connectional signal to the hexacopter.
The indicator light keeps on without blinking: the transmitter
is ready for controlling the flight.

Mode 1: Leftward/rightward fine tuning
Mode 2: Turn left/turn right fine tuning

Mode 1:Forward/backward,leftward/rightward
Mode 2:Forward/backward,turn left/turn right
Gravity control mode: press the right remote control stick,there
will be a beep sound, the remote control code will change from
normal control to gravity control.

.

1. Unscrew counter clockwise to open the battery compartment cover.
( Pic.1 )

2. Install 6 X AA batteries into the battery compartment according to the
given polarity. ( Pic. 2 )

3. Screw clockwise to close the battery compartment. (Pic. 3)

How to install the battery of remote controller

Pic.1 Pic.2 Pic.3

How to remove and insert batteries.

2

Unplug the battery cable from the power wire plug and take out the
battery. Insert the USB charger into the USB interface of the
computer; connect the battery cable with the USB wire plug.
The indicator light of the USB will be off when charging is
proceeding; once the battery is full charged, the indicator
light turns red. Full charging takes about 90 minutes.

To ensure steady flight, please set the value of the Trimmer to the midpoint.
Push up the throttle stick slowly and the hexacopter takes off.

To avoid any misunderstanding, we have defined the orientation of the
hexacopter as follows:The hexacopter is set to be copter nose right
ahead and tail facing the player .The copter nose direction is named as
“forward”, the tail direction is named as “backward”. The copter flies up
to the sky is named as “upward”; the copter flies down to the ground is
named as “downward”. Player’s left side is named as “left”, player’s right
side is named as “right”. All the directions we are talking about in this
manual are subject to the definition above.

Connect the battery wire plug to the power wire plug, then, the hexacopter
is on;the flash light will keep flashing quickly, the gyro of hexacopter
will be in signal detecting condition. Set the hexacopter to flat
surface, about 3 seconds later, the flash light will keep constant “ON”. It
means that signal connection is finished and the hexacopter is ready for
flight.

Make sure that the battery (at the bottom of the hexacopter)is well
installed and connected with power wire of hexacopter.

Pic.4

3

Light

Motor

ON/OFFRotor blade

Protecting
frames

Landing
gear

Major parts of the hexacopter

How to charge the hexacopter

Preparation for flight

The Hexacopter