Page 1
C4008
FPV camera #C4008 installation
Install the holder of the mobile phone:
AERIAL CAMERA
1
1.Connect the stand bar to the
mobile phone fixing
component.
2.Adjust the fixing component
upward or downward
according to the size of the
mobile phone.
2
3.Set the mobile phone holder
to the top of the remote
control.
3
4.Pull back the lock center of
the stand bar and slowly push
up the holder, the mobilephone
holder would be taken down.
#C4008 installation:
1
1.Insert the TF memory card into
the camera.
4
4.Insert the camera wire plug
to the port of C4008.
Tips: Please make sure that the memory card has been installed at the card slot before the camera is powered on;when
the camera is powered on, please do not insert the mermory card or take out the memory card.
2.The camera should be fastened
to the interface at the bottom of
the model,fix the camera by
screwing clockwise.
5.Insert the antenna bracket
into interface of the foot
stand and lock the screws.
2
3.Insert the camera wire plug
to the camera interface.
5
6.Install the antenna to the
antenna bracket.
FPV software download and installation
Install software
●For Android system, please visit our website www.mjxtoys.com
to download the software “MJX FPV”.
●For Apple IOS system, please go to the APP store to download
the software “MJX FPV”.
Instructions
Power on the model, the FPV indicator light is on and in red color.
Enter into settings of the smart phone, open WIFI, search MJX
FPV ****“and connect it. After successful connection, exit settings.
Open “MJX FPV” software at the smart phone and click the logo
“ ” to enter into the control interface to watch the real-
time video.
Videos & photos saving feature of the FPV software
When the FPV software is well connected with the model, the
videos and photos taken by the camera will be saved both at
the smart phone and the TF memory card. If the camera is
without the TF memory card, the videos and photos taken by
the camera will be saved at the smart phone.
Contents
4
3
6
1.Open the software
“MJX FPV”.
2.Click the
button.
3.Image is showing
on the screen.
Loading...