Mizerak P1253W User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE ,

please contact us toll free @:

1-866-556-2757

FAX: [phone]

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please

When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.

Your Model Number ______________________
Date Code ________________________

have your model number when inquiring about parts.

P1253W

2-P1253W- -WJ

Purchase Date ________________________

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

All Rights Reserved.

©

2012 Escalade Sports

1

For Customer Service Call 1-866-556-2757

IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSSEMBLY.

TWO ADU L TS ARE REQUIRED T O ASSEMBLE

THIS MIZERAK DYNASTY 6.5FT POOL TABLE

T ools Required :

Allen W rench T1 and Wrench T2 Included with the Hardware Kit
Furniture Polish and Cloth

An electric screwdriver is helpful in assembl y . Howeve r , please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.

Assembly T ips

Make sure you understand the following tips before you begin to assemble your pool table.

1 . Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

ATTENTION:

REA D AN D FOLLO W AL L ASSEM B L Y , OPE R A TION , A N D

SAFET Y INSTRUCTION S CAREFU L L Y . A T LEAS T T W O

AD U L T S AR E NEEDE D T O PU T THI S POOL T AB L E

T OGETH E R .

All Rights Reserved.

©

2012 Escalade Sports

2

For Customer Service Call 1-866-556-2757

HARDWARE IDENTIFIER

(To Scale)

H1 - M6 x 28mm

Allen Head Bolt (8)

H5 - M4 Lock
Nut (12)

H2 - 6 x 15 mm

Flat Washer (8)

H6 - 4 x 22mm

Round Head Bolt (12)

Phillips

PARTS IDENTIFIER

(Not To Scale)

H3 - M8 x 28mm

Allen Head Bolt (12)

(Not to Scale)

T1 - Allen Wrench(1)

H4 - 8.5 x 19mm

Flat Washer(12)

(Not to Scale)

T2 - Wrench(1)

P1-Pool Table

P4-End Leg Panel(2)

All Rights Reserved.

©

201 2 Escalad e Sports

Cabinet(1)

P2-Right Leg(2) P3-Left Leg(2)

P5-Side Leg Panel(2)

3

Fo r Custome r Servic e Cal l 1-866-556-2757

P6-Leg Leveler(4)

ACCESSORIES I D E N T I F I ER

( N o t T o S c a l e )

A1-Cue Chalk(2)

A5-Playfield

Cloth Brush (1)

A2-Cue Stick(2)

A3-Billiard
Ball Set(1)

A4-Triangle(1)

All Rights Reserved.

©

2012 Escalade Sports

WARNING:

CHOKING HAZARD

!

Small parts.
Not for children under 3 yrs.

4

For Customer Service Call 1-866-556-2757

PARTS REQUIRED:

12 pcs - H3 Allen Head Bolt
12 pcs - H4 Flat Washer
2 pcs - P2 Right Leg
2 pcs - P3 Left Leg
4 pcs - P6 Leg Leveler
1 pc - T1 Allen Wrench

STEP 1:
To assemble this table, leave the P1 Pool Table Cabinet face down in the carton lid. As shown in
Figure 1 , attach the P2 Right Legs and P3 Left Legs on the inside of the frame with H3 Allen Head

Bolts and H4 Flat Washers. Use the T1 Wrench to tighten the bolts. Thread the P6 Leg Levelers
into the bottom of each leg.

P6 Leg
Leveler

P3 Left Leg

NOTE:

Install legs exactly as
per Figure 1 for correct
P4 End Leg Panel assembly.

P2 Right
Leg

H4 Flat
Washer

H3 Allen
Head Bolt

P2 Right
Leg

P3 Left Leg

All Rights Reserved.

©

201 2 Escalad e Sports

P1 Pool Table
Cabinet

5

Figure 1

Fo r Custome r Servic e Cal l 1-866-556-2757