Mizco International JS-CC100 Operating Instructions Manual

Smartphone ChargeCard

Item

JS-CC100

TECHNICAL SPECIFICATIONS • ESPECIFICACIONES

TECNICAS • SPECIFICATIONS TECHNIQUES

Input: 5V 500mAh
Out put: 5V 600mAh
Battery capacity: 680mAh
Charge life (f ull cycles): 300

OPERATING INSTRUCTIONS

Before using, it is recommended to fully charge the battery pack.

1. Use the included micro-usb cable to connect the battery pack to a USB
power port, such as a laptop or wall charger.

2. The LED’s will illuminate one at a time to indicate the charging status.

3. When all 3 LED’s remain lit, the battery pack is fully charged.

4. Insert the fold-out micro-usb tip to charge your device.

To charge phone:

1. Connect the micro USB connector to your device

2.Press the power button on the battery pack for 1 second to turn it on

3.The battery display on your device will indicate that it is charging

Check the Battery Power

Note:

On the three LED display the leftmost LED (position #1) will remain lit

whenever the charger is connected to a working power source.

1. Pressing the LED indicator will reveal the remaining capacity of your

battery.

INSTRUCCIONES DE OPERACIÓN

Antes de utilizarlo, se recomienda para cargar totalmente la
batería.

1. Utilice la incluyó micro-cable USB para conectar la batería a una toma de
corriente USB, como un ordenador portátil o el cargador de pared.

2. Las luces de LED se encenderán uno a la vez para indicar el estado de
carga.

3. Cuando las 3 luces de LED permanecen encendidas, la batería está
completamente cargada.

4. Inserte el desplegable de micro-usb punta para cargar el dispositivo.

Confirmar el poder de la batería

Nota: En los tres LED de la izquierda LED (la posición # 1) permanecerá

encendido cuando el cargador está conectado a una fuente de trabajo.

1. Al pulsar el indicador LED se revela la capacidad restante de la batería.

INSTRUCTIONS DE FONCTIONNEMENT

Avant utilisation, il est recommandé de charger complètement la
batterie.

1. Utilisez le micro-inclus un câble USB pour connecter la batterie à une
prise USB, comme un ordinateur portable ou d'un chargeur mural.

2. LED s'allume une à la fois pour indiquer l'état du chargement.

3. Lorsque les 3 lumières LED rester, la batterie est complètement chargée.

4. Insérez la Micro-USB vers le bas pour charger la pointe de l'appareil.

Confirmer la puissance de la batterie

Note:

Les trois voyants LED sur la gauche (position # 1) s'allume lorsque le

chargeur est branché à une source de travail.

1. En appuyant sur la LED indique la capacité restante de la batterie.

Status Display State Battery Level

LEDs #1 through #3 are blinking Below 30%

LED #1, #2 are on and #3 is blinking Approximately 60%

LEDs #1 through #3 are on Approximately 100%

Declaration of Conformity with FCC Rules for Electromagnetic Compatibility

We, Mizco International, Inc., of 80 Essex Ave East, Avenel, NJ 07001,
declare under our sole responsibility that the product to which this declaration
relates, complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Mizco International, Inc., is not responsible for any interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate this equipment.

ICES

This Class B digital apparatus complies with Canadian ICES-003.

Please

recycl e

©2011 Mizco International, Inc. Avenel, New Jersey

www.mizco.com tel: 800•838•3200

email: [e-mail]

DIGIPOWER is a registered trademark of Mizco International Inc.

DIGIPOWER es una marca registrada de Mizco International Inc.
DIGIPOWER est une marque de commerce enregistrée de Mizco
International, Inc.

All rights reserved. • Todos los derechos reservados. • Tous droits réservés.

LIMITED WARRANTY

Mizco’s responsibility with regard to this limited warranty shall be limited
solely to the repair or replacement at its option, of any product, which fails
during normal consumer use for a period of 1 Year from the date of
purchase. This warranty does not extend to damage or failure, which
results from misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. If at any time during the 1 Year period
following the purchase the product fails due to defects in materials or
workmanship, return the defective product with freight prepaid and proof
of purchase.

All brands represented herein are registered trademarks of their respective
manufacturers.

Design and specifications are subject to change without notice.

GARANTÍA LIMITADA

La responsabilidad de Mizco al respecto de esta garantía limitada se limita
exclusivamente a la reparación o el reemplazo, a su discreción, de
cualquier producto que falla durante el uso normal del consumidor
durante un periodo de 1 año a partir de la fecha de compra. Esta garantía
no cubre daños o fallas que pudieran resultar del mal uso, descuido,
accidente, modificación, abuso, instalación incorrecta o mantenimiento
inadecuado. Si en cualquier momento durante el periodo de 1 año
después de la compra del producto, éste falla a causa de un defecto de
materiales o fabricación, por favor devuelva el producto defectuoso con el
porte prepagado y el comprobante de compra.

Todas las marcas representadas aquí son marcas comerciales registradas
de sus fabricantes respectivos.

El diseño y sus especificaciones están sujetos a cambios sin previo aviso.

GARANTIE LIMITÉE

La responsabilité de Mizco relativement à cette garantie limitée s’applique
uniquement à la réparation ou au remplacement, à son gré, de tout produit
qui se révèle défectueux pendant une utilisation normale pour une période
d’un (1) an à compter de la date d’achat. Cette garantie ne s’applique pas
aux dommages ou aux pannes résultant d’une mauvaise utilisation, d’une
négligence, d’un accident, d’une modification, d’un abus ou d’une
mauvaise installation ou maintenance. Si, au cours de la période de
garantie d’un an suivant l’achat, le produit tombe en panne à cause de
défauts de matériel ou de fabrication, renvoyez fret payé le produit
défectueux avec sa prevue d’achat.

Toutes les marques mentionnées aux présentes sont les marques de
commerce déposées de leurs fabricants respectifs.

Les caractéristiques techniques et de conception sont susceptibles d’être
modifiées sans préavis.

Before returning this product please
call our toll free customer support line
for assistance: 1-800-838-3200

Thank you for selecting DIGIPOWER

Stop

Experiencing problems?

Antes de devolver este producto, por
favor comuníquese a servicio al cliente a
nuestra línea gratuita: 1-800-838-3200
Gracias por seleccionar DIGIPOWER

Alto

¿Tiene problemas?

Avant de retourner ce produit, veuillez
communiquer sans frais avec l’assistance
à la clientèle au : 1-800-838-3200

Merci d’avoir choisi DIGIPOWER

Arrêt

Vous avez des problèmes?