Mix n Move IA4022B, IA4022C, IA4022D User manual
and stop working.
WARNING: Never operate the Portable Blender whilst it is empty. This can cause the blender to overheat
NOTE: Only charge the Portable Blender with the 5V USB cord that has been supplied with the product.
appliance. If such foods are blended in the Portable Blender, the warranty will be voided.
WARNING: Hard foods such as coffee beans, nuts, ice and frozen foods should NOT be blended in this
Portable Blender to rinse it.
NOTE: Before rst use, add water and press and hold the power button (for approx. 3 seconds) on your
thoroughly before each use.
13. The blending cup, strainer and lid are not dishwasher safe. Wash with warm soapy water and dry
12. Do not use the blending cup, strainer and lid if they are cracked or broken.
11. Do not ll the blending cup past the MAX line when adding ingredients, as this can cause spillage.
cup while it is full may result in the food or liquid spilling out.
10. Never remove the blending cup from the power base whilst it has contents. Removing the blending
and the blending cup is empty.
9. Never remove the blending cup from the power base until the power has come to a complete stop
and the contents may eject from the blender.
8. Do not operate the Portable Blender without the lid securely attached. This is extremely dangerous
appliance.
7. Do not operate the Portable Blender when the blending cup is empty as this may damage the
food or liquid to be ejected from the blending cup or cause the blending cup to shatter.
blending cup due to steam being generated from the heat. This pressure build-up may cause the
6. Do not blend warm or hot foods and liquids as this may cause a build-up of pressure in the
5. Be careful when handling the power base, especially when cleaning as the blades are very sharp.
be used to fasten the blending cup to the power base.
is screwed on tightly before using the Portable Blender. A medium to high amount of force should
4. Always ensure that the blending cup is tightly and securely fastened to the power base and the lid
is not running.
risk of injury or damage to the appliance. A scraper may be used only when the Portable Blender
3. Keep your hands and utensils away from the blades while blending foods and liquids to reduce the
2. Do not come in contact with the moving parts.
should be avoided.
1. Always operate the Portable Blender on a dry, level surface. Operating on sinks or uneven surfaces
Handling and Usage
separate remote control system.
17. The Portable Blender is not intended to be operated by means of an external timer or any type of
shock or injury.
16. The use of attachments not sold or recommended by the manufacturer may cause re or electric
15. The manufacturer is not responsible for any eventual damage caused by improper or faulty use.
General Information and Safety Instructions (cont.)
2 3
modify the Portable Blender.
14. This unit has no user-serviceable parts contained within. Do not attempt to repair, disassemble or
13. Do not cover the Portable Blender whilst in use.
12. This product is not a toy. Keep the Portable Blender out of reach of children.
purposes.
11. The Portable Blender is intended for household use only and should not be used for commercial
10. Do not use the Portable Blender if it has been dropped or damaged in any way.
9. Do not immerse the Portable Blender in water or any other liquids.
8. Do not operate the Portable Blender with wet hands.
product.
Portable Blender anywhere near water, or where water drips and may come in contact with this
7. Do not expose the Portable Blender to water, rain moisture, liquids or dust. Do not store or use the
gas or electric burner, or a heated oven).
6. Do not operate or place any part of the Portable Blender on or near any hot surfaces (such as a
5. Do not pull or carry the Portable Blender by the USB charging cable.
4. Do not use the Portable Blender for anything other than its intended use.
3. Children should be supervised to ensure that they do not play with the appliance.
instruction concerning use of the product by a person responsible for their safety.
capabilities, or lack of experience and knowledge, unless they have been given supervision or
2. The Portable Blender is not intended for use by persons with reduced physical, sensory or mental
1. Read all instructions before using the Portable Blender.
product.
Always follow basic safety precautions and accident prevention measures when using an electrical
carton. If applicable, pass these instructions and packaging on to the next owner of the appliance.
adhered to. Keep this manual in a safe place for future reference, along with the purchase receipt and
safety precautions enclosed herein reduce the risk of re, electric shock and injury when correctly
Read this manual thoroughly before rst use, even if you are familiar with this type of product. The
Retain For Future Use
General Information and Safety Instructions
07 Repair and Refurbished Goods or Parts Notices
06 Other Useful Information
05 Instructions
04 Product Overview
02 General Information and Safety Instructions
Contents
PORTABLE
BLENDER
IA4022B (CORAL), IA4022C (TEAL), IA4022D (NAVY)
Model Number:
Product Overview
1
2
3
4
5
6
7
8
9
4 5
10
Parts List Diagram
1. Lid
2. Carry Strap
3. Strainer
4. Blending Cup
5. Blades
6. Power Base
7. Indicator Light
8. Power Button
9. Charging Port
10. Micro USB Charging Cable
Included (not pictured)
Instruction Manual
Instructions
Operating the Portable Blender
This blender is designed to be used on the go. Simply charge the Portable Blender and prepare your
ingredients in the blender in advance to blend your drink at your convenience.
1. Place the power base on a at, stable and level surface.
2. Attach the blending cup to the power base by turning the blending cup in a clockwise direction. If
the power button ashes red, then blue, this means that the blending cup has not been screwed
on tight enough to the base.
3. Add the ingredients such as fruit and the liquid such as water, milk or juice into the blending cup.
NOTE: Do not overll the blending cup when adding ingredients, as this could cause spillage. It is
recommended to only ll the blending cup to the MAX line marked on the blending cup.
4. Attach the strainer to the blending cup by pushing it down into the top of the blender. It will click
into place. Then attach the lid to the blending cup by turning in an clockwise direction. Your drink
is now ready to blend.
CAUTION: Always ensure that the blending cup is tightly and securely fastened to the power base before
using. A medium to high amount of force should be used to fasten the blending cup onto the power base.
NOTE: Always ensure you have securely tightened the blending cup, strainer and lid before operating.
5. Press and hold the power button (for approx. 3 seconds) to start blending. The Portable Blender
will blend for up to 40 seconds depending on the quantity in the blender. The Portable Blender
will automatically stop and the blue indicator light will ash ve times. To continue blending press
and hold the power button. Repeat until the contents are blended to your desire. Always allow the
blender to rest for 5 seconds between each blend.
6. Check that the blender has completely stopped and is OFF. Remove the lid and strain the contents
into a glass. You can also drink directly from the Portable Blender.
WARNING: Do not detach the blending cup from the power base whilst it is full, this will result in the
contents spilling out.
NOTE: If the power button ashes red, then blue, this means that the blending cup has not been
screwed on tight enough to the base. This is a safety feature of the Portable Blender.
NOTE: This blender has a press and hold power button function. This is a safety feature so that the
blender doesn’t accidentally turn ON whilst you are drinking from the Portable Blender.
NOTE: NEVER put your hands inside your Portable Blender or touch the blades.
NOTE: If the indicator light is red, the Portable Blender battery is low and needs to be recharged.
CAUTION: Do not immerse the power base in water or any other liquids.
NOTE: Your Portable Blender may take up to 3 hours to fully charge, but often charges much faster. It
will arrive mostly charged, but for maximum power, charge it before your rst use. The light turns red
while charging and blue once fully charged.
NOTE: You can charge your Portable Blender with any USB port, from a powerbank, to your computer, to
the USB port in your car. The USB charging inlet is found under the base of the blender.
CAUTION: Always unplug the USB cable from the Portable Blender when cleaning or assembling.
CAUTION: The blades are very sharp, handle the power base with care.
Other Useful Information
Cleaning and Maintenance
1. Always unplug the USB cable from the charging port on the Portable Blender before cleaning.
2. It is recommended to clean the Portable Blender immediately after use. To clean your Portable
Blender, simply put water with an optional drop of dish soap inside, and run it one or more times
as needed. To remove the strainer, use the handle provided and pull it up and out of the blending
cup. We don’t recommend putting the blending cup, lid or strainer in the dishwasher. Never
submerge the power base.
Storage
• Before packing away the Portable Blender for storage, ensure it is clean and dry.
• We recommend storing the Portable Blender fully assembled in its original carton to protect it from
dust, with the USB charging cable.
• Store the Portable Blender in a clean and dry place, out of children’s reach.
• Do not place heavy objects on top during storage.
Warranty Information
Congratulations on your purchase
This Portable Blender is warranted to be free from defects in material and workmanship under normal
use and service conditions for a period of 12 months from the date of purchase of this article. Evidence
of unfair usage or incorrect adjustment by the owner will void this promise. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
The benets conferred by this manufacturer’s warranty are in addition to all other rights and remedies
in respect of the product which the consumer has under the Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure.
Conditions of Warranty
All warranty coverage extends only to the original retail purchaser from the date of purchase. Please
keep your receipt, tax invoice or other proof of purchase.
This warranty does not extend to any damage to a product caused by abuse, improper or abnormal
usage, or repairs not provided by us or our Service Centre. Nor does this warranty extend to products
used for commercial or rental purposes. This warranty does not cover ordinary wear, tear and
weathering, failure to follow directions, improper installation, improper maintenance or acts of God
(such as damage caused by storms, lightning, heavy winds and by snow or ice).
Making A Warranty Claim
In order to make a claim under this warranty please direct your enquiries to our Service Centre. You can
contact them on our 1300 777 137 Phone Number from Australia
Uncle Bill’s Service Centre:
2/24 Anderson Road, Smeaton Grange, NSW 2567 – if mailing please include your contact details.
A service representative will then assist you in the appropriate action to be taken. For efcient
processing of your enquiry please have proof of purchase, the date of purchase and the retailer name
you purchased the item from, and the brand on the product. Photos of the product, and scans of
receipts, may be requested to assist with your claim.
The service centre representative will assess the claim. If:
1. There is a minor fault, they can offer either a replacement spare part, replacement unit, repair or
other suitable remedy;
2. There is a major fault, they can offer a replacement, repair or suggest you return to the store you
purchased it from for a full refund.
NOTE: A request for compensation will need documentary evidence of the loss or damage suffered. It
will also need to be evidenced that such a loss was a reasonably foreseeable result of a failure by Uncle
Bill’s to comply with a consumer guarantee under the Australian Consumer Law.
3. The product was damaged through abnormal use, no refund or repair can be offered.
If the product needs to be returned and all the warranty criteria has been met, the consumer is to return
the product to the place of purchase (along with their proof of purchase) and all costs involved with this
will be the responsibility of the consumer.
Our sales and service centre has been set up to provide assembly assistance, technical support, replacement
parts and accessories, and to efciently handle all warranty related matters. Please note upon receiving your
warranty claim our Service Centre will send, via post or email, a repair and refurbished goods or parts notice.
Service Centre
Contact details and hours of operation.
Phone: (AUS) 1300 777 137
(NZ) 0800 824 556
Email: service@unclebills.com.au
9:00am – 4:30pm (AEST) Monday to Friday (excluding Public Holidays)
9:00am – 3:00pm (AEST) Saturday
This product is warranted and imported by:
Uncle Bill’s (Australia) Pty Ltd
48B Egerton Street, Silverwater NSW 2128, Australia
Phone: 02 8799 3500
Model: IA4022B (CORAL), IA4022C (TEAL), IA4022D (NAVY)
Input voltage: Charge through USB Input 5V 1A
Warranty: 12 months
Maximum Capacity: 390mL
6
7
Loading...