MivaTek FDS1301 User Manual

User manual

Fall detection sensor

Model No: FDS1300

Brand: MIVATEK

1 / 4

1 system introduction

If elders fall and can’t get up or is unable to push emergency button, the fall

detector will automatically send a signal within 10 seconds. The emergency

contacts will know that you have fallen.

If elders fall and stand up in less than 10 seconds, a emergency signal will not be

automatically generated. This allows you to recover from falls that are not serious

enough to require help. However, if you think you need assistance, you can push

emergency button any time you need help.

2 Specification

System

Processor/MCU/RF TI MSP430

Sensor STM LIS3DSH Accelerometer

Operating Voltage 3.7V-4.2V

Power Source Li-battery 70mAh

Powered Port Micro USB (Input 5VDC)

Power Consumption 3 days (Triggered twice a day )

Battery Low Level Indicator Low battery indicating if voltage <= 3.7V

Low Battery Alarm Mode

Heart Beats Duration Per 12hrs

Operating Environment

Storage Environment

Safety Regulation FCC/CE

Environmental Standard RoHS, REACH

Detection Type Fall detecor

triggered alarm

Low battery only alarms when another alarm triggered or

heartbeat

Working Temp: 0ɗ~50ɗ

Humidity: 5%~80%RH non-condensing

Temperature: -20ć~60ć

Humidity: 5%~85% RH

Function

Alarm process:

1. When the human body is exposed to the ground, received

violent impact, then the body keeps still for a while, the

DUT star to alarm. The judgment condition of falling:

weight loss - violent impact - quiet.

2. If canceled the alarm within 15 seconds, the buzzer

stopped singing, the lights go out, otherwise 15 seconds

alarm signal is issued, the buzzer continued to ring,

indicating lights flashing

3. After RF warning signal issued, DUT will open a receive

2 / 4