MivaTek ADS1301 User Manual
User manual
Activity tracking sensor
Model No: ADS1301
FCC ID: 2AE59ADS1301
1 / 4
1 system introduction
Sensor Requirement
Device Type
Activity tracking sensor
Alarm Sensor Type
Movement (front, back, left, right, up and down)
Detection type
A signal will be issued when the sensor detects a
movement of the object it attached to.
Communication Requirement
RF Frequency
433.92MHz
Modulation
ASK
Antenna
System Requirement
Power
3 volt battery CR2032
Power Consumption
6 month (Triggered 10 times a day)
Standby current
≤40uA
Trigger current
≤30mA
Battery’s voltage status
3V (Full power – functional)
2.1~2.35V (Low battery warning)
Below 2.1V (shuts down)
Operating Environment
Working Temp: -10ɗ~50ɗ
Humidity:
Storage Temp:
Humidity: 5%~85%RH
Environmental Standard
RoHS, REACH
Alarm Type
Heart Beat
Alive signal will be issued once per 12 hours.
Activity Signal
Each movement of the object being monitored will issue an
RF signal for this event
(Variance烉1600 for Refrigerator)
Low Battery Alarm
The device will send out a low battery signal, if the voltage
drop to low battery state and the signal will be sent
accompany heart beat and other alarms.
LED Indicator
* LED color: Red
* Normal Operation: LED off
Activity sensors log users daily routine. e.g. Attach a sensor to the refrigerator and other
kitchen objects to infer when food is prepared or consumed.
signals from each of the sensors to log more detail.
2 Specification
OPU receives activity
Internal Antenna, VSWR<2, Peak Gain di
5%~80%RH non-condensing
-20ɗ~60ɗ
.
2 / 4
Loading...