MitxPC PSU-120-WI-25 User Manual

picoPSU-120-WI-25

12-25V, 120Watt

ATX Power Supply

Quick Installation Guide

Version 1.0b

P/N picoPSU-120-WI-25

ATX DC-DC Converter Series

Introduction

The picoPSU-120-WI-25 is a small yet powerful and fully compliant
ATX power supply designed to power a wide variety of motherboard
from a single 12-25V unregulated power source.

The picoPSU-120-WI-25 is the only “plug-in” wide input range power
supply solution for general purpose low power motherboards.

Compatible with most VIA C3/C7 CPUs M/B and with Pentium-M /
Core Duo boards, picoPSU-120-WI-25 provides cool, 100% silent

power for your system. The PICOPSU-120-WI-25 has many
advantages over a regular power supply:

-Smallest ATX PSU to date

-100% silent operation

-Low heat dissipation with combined efficiency over 94%

-Plugs directly into the motherboard’s power connector, no cable mess

Quick installation Instructions

The PICOPSU-120-WI-25 has been specifically designed for the Mini­ITX form factor, thus eliminating the need for ATX power cables. It is
also 1U compliant – height will not exceed the 1U formfactor.

1) After the picoPSU module was ‘snapped in’, hook the hard

drive power or floppy power to your floppy/hard drives. If
more hard drives or floppy connectors are needed, use a
HDD/floppy “Y” splitter cable.

2)

picoPSU-120-WI-25 Quick Installation Guide Page 2