Mittler Bros Machine & Tool 50400 User Manual

RaceScale

Instructions

Memory Plus

Memory Plus

Push and hold for 2 seconds to turn Unit OFF

Select this button as the OK button during the

menu functions.

Push this button to enter into the menu.

This button will also allow you to scroll up.

Push this button to enter into the menu.

This button will also allow you to scroll down.

scales will turn on and read Tanner Racescales and show

you the level of the battery. If the battery is low you

selecting Zero all pads. If you are not using all pads you

may individually Zero each pad. After you highlight the

choice on the menu you may select it by pushing the OK

button. This will then display zero's on the locations

selected.

the %'s and totals will show on the displays.

seconds and the scales will turn off.

away. If the racescale needs charging you can plug the AC

adapter into the racescale and the battey voltage bar will

display on the top display.

pressing "^" on the control box.

(There are 10 memory slots available for A & B)

weight and memory weight. When you have a memory

weight on the screen you can use the up and down arrows

to scroll through stored weights.

then hold down the OK button for 2 seconds. You will then

be prompted to store the cars weight.