Mitsumi Electric Co DRTW127 User Manual

User Manual

NFC Module

MODEL DRT-W127

The purpose of this manual is to explain correct way how to integrate module
DRT-W127 to the end product. It includes procedures that shall assist you to avoid
unforeseen problems. This manual presents information that shows how module
and OEM product, where module integrated, complies with regulations in certain
regions. Any modifications, not expressly approved by the manufacturer could void
the authority to operate in these regions.

The NFC Module, model DRT-W127 has to be installed and used in accordance
with the technical description/installation instructions provided by the manufacturer.

For detail information concerning type approval of this module (e.g. where this
module is already pre-approved) please contact the authorized local distributor or
the manufacturer.

The system may only be implemented in the configuration that was authorized.
Note that any changes or modifications to this equipment not expressly approved
by the manufacturer could void the user’s authority to operate this equipment.

Regulatory Information

Operational Information

Wireless Interoperability

The end product integrating this module is designed to be interoperable with any
NFC Card Reader/Writer product that is based on ISO18092, ISO14443A/B and
JIS X 6319-4 for Contactless integrated circuit card technology and to comply with
the following standards.

･ISO/IEC 18092 Near Field Communication – Interface and Protocol
･ISO/IEC 14443A/B 13.56MHz Contactless integrated circuit card - Proximity card
･JIS X 6319-4 13.56MHz Contactless integrated circuit card-Proximity card

Safety

The end product integrating this module, like other radio devices, emits radio
frequency electromagnetic energy. The level of energy emitted by this device,
however, is less than the electromagnetic energy emitted by other wireless devices
such as mobile phones. The end product integrating this module operates within
the guidelines found in radio frequency safety standards and recommendations.
These standards and recommendations reflect the consensus of the scientific
community and result from deliberations of panels and committees of scientists
who continually review and interpret the extensive research literature. In some
situations or environments, the use of the end product integrating this module may
be restricted by the proprietor of the building or responsible representatives of the
applicable organization. Examples of such situations include the following:

･Using the end product integrating this module onboard airplanes, or

･Using the end product integrating this module in any other environment
where the risk of interference with other devices or services is perceived or
identified as being harmful.

If uncertain of the policy that applies to the use of wireless devices in a specific
organization or environment (an airplane, for example), ask for authorization to use
the end product integrated into this module before turning it on.