Page 1
Connection Terminals
2 3 4 5 6
1
S-Video/Video
2
PC/Component video input-1
Remote-1
3
PC/Component video input-2
4
Remote-2 (I/O)
5
6
HDMI
7
DVI-D
8
Serial RS-232C (I/O)
9
LAN (RJ-45)
10
Power in(3-pin with earth terminal)
11
Main power switch :Off :On
1
Dimensions (unit: mm)
421
506
192 142
490
HOLES FOR HANGER (4 PLACES) [M4XDEPTH 10]
192
120
9
* The lens focal point is the default set at the time of shipment from the factory.
Options
Optional Lenses
OL-XD2000FR
Rear-projection Short -throw
Fixed Lens
Optional Lenses
OL-XD2000TZ OL-XD8000UZ
Telescopic-throw Zoom Lens
OL-XD2000SZ OL-XD2000LZ
Short-throw Zoom Lens
Converter Lens
(mounted on the standard lens)
Ultra-telescopic-throw Zoom Lens
Long-throw Zoom Lens
Converter Lens
(mounted on the standard lens)
Color-emphasized color wheel
Color Wheel
10 11
342
240
CW-FC2
7 8
Specifications
Model
Display technology
Resolution
Brightness
Contrast ratio*
Projection lens*
Zoom / focus*
1
1
1
Picture size
Source lamp
Computer
9
compatibility
Video compatibility
Input terminals
Communication
terminals
Dimensions (W x H x D)
Weight
Power supply
*1 Varies depending on conditions. *The above specifications are for the standard lens model only. Specifications are different
for lens-less models. * Compliant with ISO21118 - 2005. * All brand names and product names are trademarks, registered
trademarks or trade names of their respective holders. * Lamp life specification is an estimate based on verification under
proper conditions and is not the duration of the warranty. Lamp will shut-off automatically when usage reaches the specified
estimated maximum lamp hours. Service life may vary widely depending on usage and operating environment and conditions,
as well as users' adherence to the maintenance and cleaning procedures provided in the user manual.
Screen Size and Projection Distance
Refer to the following table to determine the screen size and projection distance.
Front projection
W
H
H1 H2
L
WD8200U
Image(WXGA 16: 10)
Diagonal Size
Width
Height
inch cm
40
102
60
152
80
203
100
254
150
381
200
508
250
635
300
762
XD8100U
Screen(XGA 4: 3)
Diagonal Size
cm
inch
40
102
60
152
80
203
100
254
150
381
200
508
250
635
300
762
* The above figures are approximate and may be slightly different from the actual measurements.
inch cm
inch cm inch m inch m
34
86
21
51
129
32
68
172
42
85
215
53
127
323
79
170
431
106
212
538
132
254
646
159
Width
Height
inch cm
inch cm inch m inch m
32
81
24
48
122
36
64
163
48
80
203
60
120
305
90
160
406
120
200
508
150
240
610
180
WD8200U / WD8200LU
0.65" 1Chip DMD, 12˚. LVDS,
Dark chip 2TM with DDP3020(F)
1280 x 800 (Total 1,024,000 pixels)
Dual-lamp : 6500 lm
Single lamp : 3250 lm
XD8100U / XD8100LU
0.7" 1chip DMD, 12˚. LVDS,
Dark Chip 3TM with DDP3020(F)
1024 x 768 (Total 786,432 pixels)
Dual-lamp : 7000 lm
Single lamp : 3500 lm
2000 : 1 (on/off)
f=24.5-33.1mm, F=2.0-2.4
Powered focus / zoom (zoom ratio 1.35 : 1)
40"-300" (100"=3.8m) 40"-300" (100"=3.5m)
Dual / Single
Dual
Dual
Single
Single
Lamp mode
Normal
Low
Normal
Low
Resolution ; 640 x 400 - 1920 x 1200
True ; 1280 x 800, Sync-on-Green available
Resolution ; 640 x 400 - 1920 x 1200
True ; 1024 x 768, Sync-on-Green available
hour
2,000 hours
4,000 hours
4,000 hours
8,000 hours
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM / PAL-60
Component video ; 480i/p(525i/p), 576i/p(625i/p), 720p(750p 50/60Hz),
1080i(1125i 50/60Hz), 1080p(1125p 50/60Hz)
SCART (RGB + 1V sync, only mini D-sub 15-pin Terminal)
PC ; 5 BNC x 1, mini D-sub 15-pin x 1, DVI-D(with HDCP) x 1
Video ; BNC x 1, S-Video (4-pin) x 1, HDMI (Ver 1.3, Deep Color) x 1
LAN (RJ-45) ; x 1 (projector control), RS-232C (in) ; D-Sub 9pin(male) x 1 (direct command is available.),
RS-232C (out) ; D-sub 9-pin(male) x 1 (direct command is available.)
Wired remote (in) ; x 1 ( 3.5mm stereo mini jack ), Wired remote (out) : x 1 ( 3.5mm stereo mini jack),
Remote ; D-sub 9-pin(female) x 1
490 x 201 x 421mm / 19.3 x 7.9 x 16.6 inch (exclude detachable terminal cover and protrusion)
16.0kg / 35.3lbs (exclude detachable terminal cover)
AC 100 - 240 V, 50/60 Hz
Front projection, ceiling mounting
H1H2
H
L
Movable V Position
5
0
7
0
9
0
11
0
17
0
23
0
28
0
34
0
Movable V Position
0
2
0
3
0
4
0
6
0
8
0
11
0
14
0
17
W
W1W1
Maximum projection area
0
25
12
0
37
17
0
49
23
0
62
29
0
92
43
0
123
58
0
154
72
0
185
86
0
30
6
0
46
9
0
61
11
0
76
14
0
114
21
0
152
28
0
191
36
0
229
43
L
3
5
7
9
13
17
21
26
3
5
6
8
12
16
20
24
W1W1
Center of the lens
L
Maximum projection area
Distance from Screen
Shortest(Wide) Longest(Tele)
54
58
1.5
81
88
2.2
108
118
3.0
135
148
3.8
202
224
5.7
269
299
7.6
337
375
9.5
404
450
11.4
Distance from Screen
Max. Zoom Min. Zoom
61
54
1.4
91
82
2.1
122
110
2.8
152
138
3.5
229
208
5.3
305
279
7.1
381
349
8.9
457
419
10.6
Default Height
Projected Image(HO)
inch cm cminch cminch
0
80
2.0
0
121
3.1
0
162
4.1
0
203
5.2
0
306
7.8
0
408
10.4
0
-
0
-
-
Default Height
Projected Image(H)
inch cm cminch cminch
74
1.9
0
112
2.8
0
150
3.8
0
189
4.8
0
284
7.2
0
380
9.7
0
-
-
0
-
-
0
H1 H2 H1 H2 W1 W1
10
0
15
0
19
0
24
0
36
0
49
0
61
0
73
0
H1 H2 H1 H2 W1 W1
0
12
0
18
0
24
0
30
0
45
0
60
0
75
0
90
Center of the lens
Movable H Position
0
9
3
0
13
5
0
17
7
0
22
9
0
33
13
0
44
17
0
55
21
0
65
26
Movable H Position
3
0
8
5
0
12
6
0
16
8
0
20
12
0
30
16
0
41
20
0
51
24
0
61
MULTIMEDIA DATA/VIDEO PROJECTORS
0
9
0
13
0
17
0
22
0
33
0
44
0
55
0
65
The Pinnacle of Digital Projectors
0
8
0
12
0
16
0
20
0
30
0
41
0
51
0
61
Image Quality, Functionality & Reliability – The bar just got raised a level higher.
To find out more about the WD8200U/WD8200LU/XD8100U/XD8100LU and other projectors, visit us at
L-188-0-C8551-C KYO-1008 Printed in Japan(MDOC
)
Superseding publication L-188-0-C8551-B Jun. 2010
Specifications are subject to change without notice.
Revised publication effective Aug. 2010
Page 2
Brilliant Support for Various Presentation Venues
L
4,
s
8,
s
including business, education and entertainment
For board room, conference hall
For Digital Signage
Imagine a long presentation or seminar in a large, bright room like a hall or auditorium. The impact of that presentation will depend on the performance of
the projector you use. To ensure that nothing goes wrong, these projectors are equipped with digital light processing (DLP
TM
) technology that reproduces
high-definition images in high contrast and with superior brightness. Built for durability and easy installation and maintenance, they last and last with
minimal upkeep. Both models are equipped with dual lamps, allowing the continuous projection of images for long periods of time together with greatly
increased reliability. For installation models, our aim was to ensure the advanced level of performance essential for such units.
For Auditorium
High Brightness
Powerful Large-screen Images in
Well-lit Halls/Auditoriums
7000lm High Brightness*
The XD8100U, delivers a super
images, brightness level for presenting in large
meeting rooms and conference halls.
*WD8200U maximum is 6500 lumens.
bright 7000 lumen*
High Image Quality
Cutting-Edge Technologies Reproduce Strikingly Sharp Images
Super Resolution
This innovative advanced image
processing algorithm is a product
of Mitsubishi Electric.
The technology analyzes blurred
components of the original images,
estimates the high-resolution data
not provided in the original signal
and corrects the image quality.
The result is the clear projection of
images such as people's faces in
fine detail.
High Reliability
Durable and Reliable – Continuous 24/7 Use Capability
The dual lamp system and lamp relay function enable continuous operation
with no risk of the image going out. Dust resistance and cooling
performance are greatly enhanced by the automated self-cleaning filter and
heat-pipe cooling system technologies that have proven so successful in air
conditioners, enabling extended continuous use for monitoring and digital
signage applications.
Dual lamp and
lamp relay function
24 hours a day, 7 days a week
Anxiety-free continuous operation
Automatic
Cleaning Filter
Various Lamp Relay
A dual lamp light source offers numerous advantages. Key benefits include
the fact that the lamps can be rested (turned off) alternately during long-term
usage, ensuring continuous projection. Additionally, if one of the lamps goes
out, there is an automatic back-up function that activates the other lamp,
enabling nonstop projection with no interruption.
Automatic Cleaning Filter
For the XD8100U and WD8200U, we've utilized the
same mechanism (mesh filter and cleaning brush) that
has a proven track record in Mitsubishi Electric air
conditioners and air purifiers is utilized.
It automatically prevents dust from building up in
the radiator of the heat-pipe cooling unit for the digital
micromirror device (DMD), thereby ensuring
trouble-free use for extended periods of time.
Heat-pipe cooling
system
Estimation of resolution compensation data
Low-resolution image
High resolution data that does not
exist in the enlarged image is
estimated by Mitsubishi’s proprietar y
image processing algorithm.
Enlargement
Compensation
Enlarged image (original)
Image processed by Super Resolution
Heat-pipe Cooling System
Compared to liquid-cooling systems, the heat-pipe cooling system has
a simpler structure and does not require a power supply, enabling cost
reductions and a compact design. Not only is it highly reliable, other benefits
include exceptional energy savings and quietness as well.
Long 4000hrs Lamp Life
Designed with a lamp temperature controlling
system, the XD8100U and WD8200U can
support an estimated lamp rating of up to
4000 hours. The long estimated lamp life
makes dramatic reductions in overall cost of
ownership by decreasing the frequency of
lamp replacements.
amp Life Comparison
6,000 hours
Secound lamp
replacement
Lower
Lower
running
running
costs
costs
000 hours3,000 hour
3,000-hour
lamp
4,000-hour
lamp
Lamp life specification is an estimate based on verification under proper conditions and is not the duration of
the warranty. Lamp will shut-off automatically when usage reaches the specified estimated maximum lamp
hours. Service life may vary widely depending on usage and operating environment and conditions, as well as
users' adherence to the maintenance and cleaning procedures provided in the user manual.
Factory-installed lamp First lamp replacement
Factory-installed lamp First lamp replacement
000 hour
Ample Features for Increased Expressiveness and Operation Ease
Ultra Quiet 28dBA Operation
Fan noise during projector operation can be distracting during a presentation
or videoconference. The XD8100U and WD8200U projectors operate at
a significantly low noise level of
only 28dBA (i.e., using a single
lamp in “low lamp” mode).
As a result, presentations and
conferences can be held
without distracting projector
noise in the background.
Examples of Noise Levels
20dBA : Rustling leaves, the ticking of
a wall clock (from 1m in front)
30dBA : A whisper, a suburban
area very late at night
40dBA : A quiet neighborhood,
small birds chirping
28dBA
Natural Color Matrix (NCM)
In addition to conventional red (R), green (G) and blue (B) color gradations,
the intermediate colors of yellow (Y), magenta (M) and cyan (C) can each be
controlled independently. Accentuating specified colors according to need
realizes the reproduction of vivid color tones one step closer to natural.
Geometric Corrections
Keystone Correction
Trapezoidal distortion caused when the projector is not positioned directly in
front of the screen is corrected in both vertical and horizontal directions.
Cornerstone Correction
screen
Pixel conversion is used to correct
trapezoidal and diagonal distortion that
causes oblique images, ensuring the proper
aspect ratio.
Curved Surface Projection Correction
These projectors are equipped with a function for correcting distortion that
occurs when projecting images onto curved surfaces. This advanced feature
is practical for unique applications such as projecting images onto pillars at
special event sites.
Multi-Screen Solution
Edge Blending
Edge blending creates a seamless
Multiple projectors side-by-side
image by adjusting the brightness at
adjoining edges when using multiple
projectors side-by-side to reproduce
single widescreen images.
Edge blending function Image overlap apparent
With edge blending Without edge blending
Color Matching
The color matching function corrects
variations in the color reproduced by
each projector when multiple
projectors are used simultaneously.
This color homogenization enables
the integrated display of images.
Color matching function
Modern Design
A stylish white-toned projector shell was chosen in
consideration of use as a ceiling-mounted installation.
Additionally, the detachable terminal cover hides projector
cabling, showing the ingenuity incorporated to ensure
an appealing unit that matches most interior spaces.
Interchangeable Color Wheel
Choose between two color wheels, one each accentuating color and the other
emphasizing brightness, depending on the type of images to be projected.
This interchangeability enables a more appropriate expression of the images
being reproduced.
360° Projection Capability
Images can be projected over a full 360° range
along the vertical axis* including reproduction on
the ceiling or floor.The application possibilities are
limitless. *Excluding use in high-altitude mode.
Remote Control to Match the Installation
ID-compatible Remote Control
ID settings for up to 63 projectors are possible. Setting the IDs allows
control of each individual projector when multiple projectors are installed.
Control Projector from Remote Locations
Control operations remotely up to 30m from the projector when using
the wireless remote controller (must be standing in front of the projector).
When using the wired remote controller, projector operation is possible at a
distance of up to 100m.* These options give the presenter the ability to move
more freely at big venues, such as a large meeting rooms or auditoriums.
*Depends on cable performance.
Network Connectivity
Projectors are equipped with a RJ-45 LAN terminal for remote operation.
Additionally, when used with Crestron
to 250 projectors including power on/off control, message display and
confirmation of lamp service hours is possible using RoomView™/e-Control™.
Both projectors are equipped with
AMX Device Discovery for
simplified device management and
compatible with PJLink™.
The trademark of PJLink is trademark applied for registration or registered
trademark in Japan, the United States, and other countries and areas.
Stand-by Wattage under 0.3W*
Stand-by (low) mode power consumption is less than 0.3W, offering increased
energy savings and further contributing to environmental preservation.
*When in stand-by (low) mode. At this time, use of the LAN function, RS-232C output and Remote 1 is not possible.
Motorized lens shift
2-Screen mode
(PinP : XD8100U / Split : WD8200U)
Test pattern
Mechanical shutter
Direct power off
*Previous languages: Chinese, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish
Languages added: Dutch, Indonesian, Malaysian, Norwegian, Thai, Turkish, Vietnamese
Optional
Terminai Cover
®
Room View®, integrated control of up
Lamp side replacement
Closed caption support
High-altitude mode
(2,000 to 2,700 m)
OSD menu multilanguage
compatibility (19 languages*)
Loading...