Mitsubishi VS-L46XM70U PRODUCT INFORMATION

Specification

Model Name VS-L46XM70U
Display Device TFT LCD (SPVA Mode)
Display Resolution WXGA (1366 x 768 Pixels)
Viewable Image Size 46" (H: 1018.4 mm/V: 572.5 mm)

Brightness

Contrast Ratio 3000:1 (Typ.)
Viewing Angle (H/V) 178 Degree
Display Colors 16.7 Million
Mullion (Total) 7.3 mm (Typ.)/8.3 mm (Typ.)*
Back Light Operating Life 50000 hrs (Average)
Optional Input Board Slot x 3

Control Signal Input

Overlay Function Max. 6 Windows per each screen
Control S/W (Option) Mitsubishi D-Wall Software Suite

Power Consumption

Voltage Range AC 100–240 V ± 10 %, 50/60 Hz ± 1 Hz

Dimensions

Operating Condition

Weight 30 kg/66 lbs

*When using with Wall Mount Frame BR-XM70KK (option).

2

700 cd/m
500 cd/m
350 cd/m

RS-232C: D-sub 9
LAN: RJ45 (10BASE-T/100BASE-TX)
D-sub 9 x 2 (IN/OUT)
Mitsubishi Original Control Link
Wired Remote: F3.5 Jack
IR Receiver (Option)

255 W (Typ.)@Bright Mode
205 W (Typ.)@Normal Mode
175 W (Typ.)@Eco Mode

1025.7 mm (W) x 579.8 mm (H) x 150 mm (D)

40.4 inch (W) x 22.8 inch (H) x 5.9 inch (D)
5–35 C. Degree@Normal/Eco Mode
5–30 C. Degree@Bright Mode

(Typ.)@Bright Mode

2

(Typ.)@Normal Mode

2

(Typ.)@Eco Mode

4.6

579.8

572.5

13 6

15 0

4.6

75

1018.4

1025.7

677

30015 0 15 0

2.7

2.7

153 .8 300

Analog RGB input board (Option)

Model number VC-B70G2
Signal input terminal (Analog RGB) 5BNC x 1, HD D-sub 15 pins x 1

RGB input scanning frequency

Pixel clock rate 25–162 MHz

Functions

Signal resolutions VGA (640 x 480) to WUXGA (1920 x 1200)
Horizontal 31.5–92 kHz
Vertical 49–85 Hz

Image scaling (shrink and zoom)
Frame rate conversion

Digital RGB input board (Option)

Model number VC-B70D2
Signal input terminal (Digital RGB) DVI-D x 2

RGB input scanning frequency

Pixel clock rate 25–162 MHz
Sigal format TMDS

Functions

Signal resolutions VGA (640 x 480) to WUXGA (1920 x 1200)
Horizontal 31.5–92 kHz
Vertical 49–85 Hz

Image scaling (shrink and zoom)
Frame rate conversion

Video input board (Option)

Model number VC-B70V2
Signal input terminal (Analog Video) 3BNC x 2

Analog video input signals

Functions

NTSC, NTSC4.43, PAL, PAL-M, PAL-N
PAL-60, SECA M
Image scaling (shrink and zoom)
Frame rate conversion

Daisy chain board (Option)

Model number VC-B70DC

Signal input terminal

Signal output terminal Digital RGB: DVI-D x 1 (for daisy chain use only)

RGB input scanning frequency

Analog video input signals

Pixel clock rate 25–162 MHz

Functions

Signal resolutions VGA (640 x 480) to WUXGA (1920 x 1200)
Horizontal 31.5–92 kHz
Vertical 49–85 Hz

Analog RGB: HD D-sub 15 pins x 1
Digital RGB: DVI-D x 1
Analog video: 3BNC x 1

NTSC, NTSC4.43, PAL, PAL-M, PAL-N
PAL-60, SECA M

Image scaling (shrink and zoom)
Frame rate conversion
Daisy chain (up to 16 cubes)

SDI input board (Option)

Model number VC-B70SD1
Signal input terminal HD-SDI: BNC x 1

Input signals

Signal output terminal HD-SDI: BNC x 1 (for through output)
Gen Lock input terminal BNC x 1

Functions

*At least one input board per single display is needed for operation.
*The specifications are tentative and will be changed without notices.

3G-SDI (SMPTE424M): 1080p@50/59.94/60 Hz
HD-SDI (SMPTE292M): 1080i@50/59.94/60 Hz,
720p@50/59.94/60 Hz
SD-SDI (SMPTE259-C): 480i@59.94 Hz,
576@50 Hz

Image scaling (shrink and zoom)
Frame rate conversion through output

LCD Display Wall

Mitsubishi Electric Europe B.V. • German Offi ce • Visual Information Systems • Gothaer Str. 8 • D-40880 Ratingen

The right to make technical changes is reserved; no liability is accepted for printing or other errors.

Tel.: [phone] • Fax: [phone] • www.Mitsubishi-VIS.de

Mitsubishi Electric
LCD Display Wall System Solutions

The Mitsubishi Electric LCD Display Wall System is the ideal solution for small- and medium-sized control rooms
that require high picture quality from displays used continuously for long periods of time.
It features an advanced technology system that provides intelligence, durability, redundancy and space savings.

We have extensive expertise in this field, including the installation of
over 35,000 display wall cubes for mission-critical applications.

Combining a space-saving design and easy video/data integration using
slot-in board processing, this display wall system is perfect
for the following applications:

>

Traffic management

>

Security operations

>

Power distribution/
Water treatment management

>

Broadcasting

7.3 mm mullion (total)

Super narrow 7.3 mm mullion (total) minimizes the image content
loss, which is critical for command and control room usage.

7. 3 m m

High picture quality over the entire wall

Digital gradation circuit

Mitsubishi Electric's innovative digital gradation circuit provides uniform
brightness distribution across the screen, resulting in the reproduction of
sharp, vivid images form edge to edge on multi-screen configurations.
This virtually eliminates the problem of decreased brightness at the edges
of each screen.

Without “Digital Gradation Circuit”

With “Digital Gradation Circuit”

Internal processing

Built-in processor

Each display of LCD Display Wall System is equipped with an internal
data-processing function that allows to show up to six windows per a
single panel, and allows to show up to three windows placed any size
and position across the entire wall when using the daisy chain function
of the daisy chain board.
Install Mitsubishi Electric’s D-Wall software suite and the entire
imaging system can be controlled intuitively from a user-friendly
graphical user interface.

Redundancy

Smart Switch

The LCD Display Wall System is also equipped with a “Smart Switch”.
This signal source control function provides the redundancy necessary
for mission-critical applications that require continuous operation. If
the signal is unexpectedly lost, the signal source is automatically
switched to an alternative device (either “port-to-port” or “board-to­board”) within seconds of detecting the ‘no signal’ status. As a result,
user downtime is minimized in the event of a signal source failure.

Front access for easy service

When used in combination with Mitsubishi Electric’s original optional
wall mount kit, LCD panels can be accessed from the front-side of the
system. This design makes it possible for panels to be serviced from the
front as well as the rear.

User-friendly graphical user interface

“D-Wall”, a software suite developed by Mitsubishi Electric, is
available for LCD Wall System. The software was originally
created for use with the display wall cube and processor, and
has been continuously modified and upgraded.

In addition to basic functions such as wall configuration
support, display layout control, and brightness and color
control, the following functions for control room use have
been incorporated into the latest version.

(Option)

Color space control

Our LCD displays are equipped with an innovative digital color
space control circuit developed in-house. The circuit works to balance
and blend colors, compensating for the color and brightness discrep­ancies among LCD displays.

Without “Color Space Controll”

With “Color Space Controll”

Dynamic brightness balancing

With a built-in brightness sensor, Dynamic brightness balancing circuit can
keep the brightness uniformity of display wall over the period of operation
time by communicating the measured brightness data by every 2 seconds.

Example 2 x 2 display wall

10 0 %

Brightness

50%

As the black line indicates,
the brightness level of
the 2 x 2 display wall is maintained at
the same brightness

Time

Remote multi-mouse cursor application control

When being operated under a client-server configuration,
multiple users (clients) can simultaneously navigate applica­tions using their dedicated mouse. Individual cursors, color­coded for each mouse, are shown on the display wall, and all
clients can control applications on the server. This function
simultaneously enables more efficient control room operation
and room layout flexibility.

Alert message utility

This information function displays alerts and notices on the
wall, supporting teamwork in the control room.

System monitoring

This management function constantly monitors key operating
parameters of the LCD Wall System such as the status of
cooling fans and temperature inside the displays. The informa­tion for each display is displayed via the GUI.

Multilingual interface

The D-Wall software suite is available in multiple languages.