Mitsubishi VS-67PHF50U, VS-50PH50, VS-67PHF50, VS-67PH50U, VS-50PH50U User Manual
...
ENGLISH
DLP
MODEL
TM
DATA DISPLAY
VS-50PH50U
VS-67PH50U
VS-67PHF50U
User’s Manual
VS-67PH50U-SN
SC-067PH50U
VS-67PHF50U-SN
SC-067PHF50U
FRANÇAIS
)(
ESPAÑOL
)(
PORTUGUES
ITALIANO
Be sure to follow the directions below.
Warning:
This user’s manual is important to you. Please read it before using your product.
This user’s manual is important to you. Please read it before using your product.
For MITSUBISHI dealer
Please read Set-up and Installation Manual before installing the product.
Trademarks
This product requires special installation to prevent
toppling.
Please ask installation specialists for installation.
Don’t attempt to install the product by yourself.
SVENSKA
DEUTSCH
All brand names and product names herein are trademarks or registered trademarks of their respective companies.
• DLP and DLP logo are trademarks of Texas instruments.
EN-1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTE:
SINCE THIS PRODUCT IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET MUST BE INSTALLED NEAR THE EQUIPMENT AND SHOULD BE EASILY ACCESSIBLE.
EN-2
Important safeguards
Please read all these instructions regarding your
DLPTM data display and retain them for future
reference. Follow all warnings and instructions
marked on the DLPTM data display.
1. Read instructions
All the safety and operating instructions
should be read before the appliance is operated.
2. Retain instructions
The safety and operating instructions should
be retained for future reference.
3. Warnings
All warnings on the appliance and in the
operating instructions should be adhered to.
4. Instructions
All operating instructions must be followed.
5. Cleaning
Unplug the power cord from the wall outlet
before cleaning it. Do not use liquid aerosol
cleaners. Use a damp soft cloth for cleaning.
6. Attachments and equipment
Never add any attachments and/or equipment
without the approval of the manufacturer as
such additions may result in the risk of fire,
electric shock or other personal injury.
7. Water and moisture
Do not use this product near water or in
contact with water.
8. Accessories
Do not place this product on an unstable cart,
stand, tripod, bracket or table. Use only with
a cart, stand, tripod bracket, or table recommended by the manufacturer or sold with the
product. Any mounting of the appliance
should follow the manufacturer’s instructions
and should use a mounting accessory recommended by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force
and uneven surfaces may cause the appliance
and cart combination to overturn.
9. Ventilation
Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the product and to protect it from
overheating. Do not block these openings or
allow them to be blocked by placing the
product on a bed, sofa, rug, or bookcase.
Ensure that there is adequate ventilation and
that the manufacturer’s instructions have
been adhered to.
10. Power sources
This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power, please consult your appliance dealer
or local power company.
11. Power-cord protection
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them. Pay
particular attention to cords at plugs, convenience receptacles, and points where they exit
from the appliance.
12. Overloading
Do not overload wall outlets and extension
cords as this can result in a fire or electric
shock.
13. Objects and liquids
Never push objects of any kind through
openings of this product as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
14. Servicing
Do not attempt to service this product yourself. Refer all servicing to qualified service
personnel.
15. Damage requiring service
Unplug the power cord from the wall outlet
and refer servicing to qualified service personnel under the following conditions:
(a) If the power-supply cord or plug is dam-
aged.
(b) If liquid has been spilled, or objects have
fallen into the product.
(c) If the product does not operate normally
after you follow the operating instructions. Adjust only those controls that are
covered by the operating instructions. An
improper adjustment of other controls
may result in damage and may often
require extensive work by a qualified
technician to restore the product to its
normal operation.
(d) If the product has been exposed to rain or
water.
(e) If the product has been dropped or the
cabinet has been damaged.
(f) If the product exhibits a distinct change
in performance - this indicates a need for
service.
16. Replacement parts
When replacement parts are required, be sure
that the service technician has used replacement parts specified by the manufacturer or
parts having the same characteristics as the
original part. Unauthorized substitutions
may result in fire, electric shock or other
hazards.
17. Safety check
Upon completion of any service or repair to
this product, ask the service technician to
perform safety checks determining that the
product is in a safe operating condition.
ENGLISH
EN-3
Loading...