How it Works
Mitsubishi
Loading...
PEFY-WP71VMA-E
Data Book
28 pgs6.93 Mb0
Operation Manual
204 pgs5.54 Mb0

Mitsubishi PEFY-WP63VMA-E, PEFY-WP25VMA-E, PEFY-WP71VMA-E, PEFY-WP80VMA-E, PEFY-WP125VMA-E Data Book

...
AIR CONDITIONING SYSTEMS
MODEL
PEFY-WP-VMA-E
CONTENTS
PEFY-WP-VMA-E
I.Ceiling concealed (Medium static pressure type)
1. SPECIFICATIONS .................................................................................................................................... 2
2. EXTERNAL DIMENSIONS ....................................................................................................................... 5
3. CENTER OF GRAVITY ............................................................................................................................ 9
4. ELECTRICAL WIRING DIAGRAMS ......................................................................................................... 10
5. SOUND LEVELS ...................................................................................................................................... 11
5-1. Sound levels .................................................................................................................................... 11
5-2. NC curves ........................................................................................................................................ 12
6. FAN CHARACTERISTICS CURVES........................................................................................................ 18
7. ELECTRICAL CHARACTERISTICS......................................................................................................... 24
8. OPTIONAL PARTS................................................................................................................................... 25
8-1. Optional parts line up for the Indoor unit .......................................................................................... 25
8-2. Filter box .......................................................................................................................................... 25
MEES17K198
1
1. SPECIFICATIONS
I.Ceiling concealed (Medium static pressure type)1. SPECIFICATIONS
Model PEFY-WP20VMA-E PEFY-WP25VMA-E PEFY-WP32VMA-E PEFY-WP40VMA-E
Power source
Cooling capacity *1 kW 2.2 2.8 3.6 4.5
(Nominal) *1 kcal/h 1,900 2,400 3,100 3,900
*2 Power input kW 0.07 0.09 0.11 0.14
Heating capacity *3 kW 2.5 3.2 4.0 5.0
(Nominal) *3 kcal/h 2,200 2,800 3,400 4,300
PEFY-WP-VMA-E
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension HxWxD mm 250 x 700 x 732 250 x 900 x 732 250 x 900 x 732 250 x 1,100 x 732
Net weight kg (lbs) 21 (47) 26 (58) 26 (58) 31 (69)
Heat exchanger
FAN Type x Quantity Sirocco fan x 1 Sirocco fan x 1 Sirocco fan x 1 Sirocco fan x 2
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-Hig h) (Low-Mid-High)
Insulation material
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse Fuse
Refrigerant control device - - - -
Connectable outdoor unit/HBC controller
Diameter of water pipe Inlet in. Rc 3 /4 screw Rc 3/4 screw Rc 3/4 screw Rc 3/4 screw
Field drain pipe size mm (in.) O.D.32 (1-1/4) O.D.32 (1-1/4) O.D.32 (1-1/4) O.D.32 (1-1/4)
Drawing External KD94L918X01 KD94L918X01 KD94L918X01 KD94L918X01
Standard attachment Document
Optional parts Filter box PAC-KE91TB-E PAC-KE92TB-E PAC-KE92TB-E PAC-KE93TB-E
*2 Current input A 0.55 0.64 0.74 1.15
*2 Power input kW 0.05 0.07 0.09 0.12
*2 Current input A 0.44 0.53 0.63 1.04
Water Volume L 0.7 1.0 1.0 1.8
*4 External static press. Pa
Motor Type DC motor DC motor DC motor DC motor
Motor output kW 0.085 0.085 0.085 0.121
Driving mechanism D irect-driven by motor Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-Hi gh) (Low-Mid-High) (Low-Mid-High)
*5 *6 Outlet in. Rc 3/4 screw Rc 3/4 screw Rc 3/4 screw Rc 3/4 screw
Wiring KD94L919X01 KD94L919X01 KD94L919X01 KD94L919X01
Refrigerant cycle - - - -
Accessory
*1 BTU/h 7,500 9,600 12,300 15,400
*3 BTU/h 8,500 10,900 13,600 17,100
in. 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8
mmH2O
3
m
L/s 125 - 150 - 175 167 - 200 - 233 200 - 242 - 283 2 42 - 300 - 350
cfm 265 - 318 - 371 353 - 424 - 494 424 - 512 - 600 512 - 636 - 742
*2 dB <A> 23-26-29 23-27-30 25-29-32 26-29-34
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
/min 7.5 - 9.0 - 10.5 10.0 - 12.0 - 14.0 12.0 - 14.5 - 17.0 14.5 - 18.0 - 21.0
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
Ceiling concealed (Medium static pressure type)
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
Notes: Unit converter
1.Nominal cooling conditions Indoor: 27°CD.B./19°CW.B. (81°CD.B./66°CW.B.), Outdoor: 35°CD.B. (95°CD.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions Indoor: 20°CD.B. (68°CD.B.), Outdoor: 7°CD.B./6°CW.B. (45°CD.B./43°CW.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
4.The factory setting of external static pressure is shown without < >. Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Be sure to install a valve on the water outlet.
6.Install a strainer (40 mesh or more) on the pipe n ext to the valve to remove the foreign matters.
7.Please group units that operate on 1 branch.
MEES17K198
referred to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
kcal/h =kW x 860
BTU/h =kW x 3,412
cfm =m
lbs =kg / 0.4536
*Above specification data is
subject to rounding variation.
3
/min x 35.31
2
1. SPECIFICATIONS
Model PEFY-WP50VMA-E PEFY-WP63VMA-E PEFY-WP71VMA-E PEFY-WP80VMA-E
Power source
Cooling capacity *1 kW 5.6 7.1 8.0 9.0
(Nominal) *1 kcal/h 4,800 6,100 6,900 7,700
*2 Power input kW 0.14 0.14 0.24 0.24
*2 Current input A 1.15 1.15 1.47 1.47
Heating capacity *3 kW 6.3 8.0 9.0 10.0
(Nominal) *3 kcal/h 5,400 6,900 7,700 8,600
*2 Power input kW 0.12 0.12 0.22 0.22
*2 Current input A 1.04 1.04 1.36 1.36
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension HxWxD mm 250 x 1,100 x 732 250 x 1,100 x 732 250 x 1,400 x 732 250 x 1,400 x 732
Net weight kg (lbs) 31 (69) 31 (69) 40 (89) 40 (89)
Heat exchanger
Water Volume L 1.8 2.0 2.6 2.6
FAN Type x Quantity Sirocco fan x 2 Sirocco fan x 2 Sirocco fan x 2 Sirocco fan x 2
*4 External static press. Pa
Motor Type DC motor DC motor DC motor DC motor
Motor output kW 0.121 0.121 0.244 0.244
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
Insulation material
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse Fuse
Refrigerant control device - - - -
Connectable outdoor unit/HBC contro ller
Diameter of water pipe Inlet in. Rc 3/4 screw Rc 1-1/4 screw Rc 1-1/4 screw Rc 1-1/4 screw
*5 *6 Outlet in. Rc 3/4 screw Rc 1-1/4 screw Rc 1-1/4 screw Rc 1-1/4 screw
Field drain pipe size mm (in.) O.D.32 (1-1/4) O.D.32 (1-1/4) O.D.32 (1-1/4) O.D.32 (1-1/4)
Drawing External KD94L918X01 KL94G001X01 KL94G001X01 KL94G001X01
Wiring KD94L919X01 KD94L919X01 KD94L919X01 KD94L919X01
Refrigerant cycle - - - -
Standard attachment Document
Accessory
Optional parts Filter box PAC-KE93TB-E PAC-KE93TB-E PAC-KE94TB-E PAC-KE94TB-E
*1 BTU/h 19,100 2 4,200 27 ,300 30,70 0
*3 BTU/h 21,500 2 7,300 30 ,700 34,10 0
in. 9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8
mmH2O
3
m
L/s 242 - 300 - 350 242 - 300 - 350 383 - 467 - 550 383 - 467 - 550
cfm 512 - 636 - 742 512 - 636 - 742 812 - 989 - 1,165 812 - 989 - 1,165
*2 dB <A> 26-29-34 26-29-34 28-33-37 28-33-37
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
/min 14.5 - 18.0 - 21.0 14.5 - 18.0 - 21.0 23.0 - 28.0 - 33.0 23.0 - 28.0 - 33.0
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
PEFY-WP-VMA-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
Notes : Unit converter
1.Nominal cooling conditions Indoor: 27°CD.B./19°CW.B. (81°CD.B./66°CW.B.), Outdoor: 35°CD.B. (95°CD.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions Indoor: 20°CD.B. (68°CD.B.), Outdoor: 7°CD.B./6°CW.B. (45°CD.B./43°CW.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
4.The factory setting of external static pressure is shown without < >. Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Be sure to install a valve on the water outlet.
6.Install a strainer (40 mesh or more) on the pipe next to the valve to remove the foreign matters.
7.Please group units that operate on 1 branch.
MEES17K198
referred to the Installation Manual.
* Due to continuing improvement, ab ove specifications may be subject to change without notic e.
kcal/h =kW x 860
BTU/h =kW x 3,412
cfm =m
lbs =kg / 0.4536
*Above specification data is
subject to rounding variation.
3
/min x 35.31
3
1. SPECIFICATIONS
Ceiling concealed (Medium static pressure type)
Model PEFY-WP100VMA-E PEFY-WP125VMA-E
Power source
Cooling capacity *1 kW 11.2 14.0
(Nominal) *1 kcal/h 9,6 00 12,000
*2 Power input kW 0.24 0.36
Heating capacity *3 kW 12.5 16.0
(Nominal) *3 kcal/h 10,800 13,800
PEFY-WP-VMA-E
External finish Galvanized steel plate Galvanized steel plate
External dimension HxWxD mm 250 x 1,400 x 732 250 x 1,600 x 732
Net weight kg (lbs) 40 (89) 42 (93)
Heat exchanger
FAN Type x Quantity Sirocco fan x 2 Sirocco fan x 2
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High)
Insulation material
Air filter PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse
Refrigerant control device - -
Connectable outdoor unit/HBC controller
Diameter of water pipe Inlet in. Rc 1-1/ 4 screw Rc 1-1/4 screw
Field drain pipe size mm (in.) O.D .32 (1-1/4) O.D.32 (1-1/4)
Drawing External KL94G001X01 KL94G001X01
Standard attachment Document
Optional parts Filter box PAC-KE94TB-E PAC-KE95TB-E
*2 Current input A 1.47 2.21
*2 Power input kW 0.22 0.34
*2 Current input A 1.36 2.10
Water Volume L 2.6 3.0
*4 External static press. Pa
Motor Type DC motor DC motor
Motor output kW 0.244 0.244
Driving mechanism D irect-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-Hi gh)
*5 *6 Outlet in. Rc 1-1/4 screw Rc 1-1/4 screw
Wiring KD94L919X01 KD94L919X01
Refrigerant cycle - -
Accessory
*1 BTU/h 38,200 47,800
*3 BTU/h 42,700 54,600
in. 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 63 x 28-7/8
mmH2O
3
m
L/s 383 - 467 - 550 492 - 5 92 - 700
cfm 812 - 989 - 1,165 1,042 - 1,254 - 1,483
*2 dB <A> 28-33-37 32-36-40
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
/min 23.0 - 28.0 - 33.0 29.5 - 35.5 - 42.0
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
1-phase 220-230-240 V 50/
60 Hz
Cross fin (Aluminum fin and
copper tube)
<35> - 50 - <70> - <100> -
<150>
<3.6> - 5.1 - <7.1> - <10.2> -
<15.3>
EPS, Polyethylene foam,
Urethane foam
HYBRID CITY MULTI/
CMB-WP-V-GA1, CMB-WP-
V-GB1, CMB-WM-V-AA,
CMB-WM-V-AB
Installation Manual, Instruc-
tion Book
Insulation pipe for water pipe,
Washer, Drain hose, Tie
band
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
Notes : Unit converter
1.Nominal cooling conditions Indoor: 27°CD.B./19°CW.B. (81°CD.B./66°CW.B.), Outdoor: 35°CD.B. (95°CD.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions Indoor: 20°CD.B. (68°CD.B.), Outdoor: 7°CD.B./6°CW.B. (45°CD.B./43°CW.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
4.The factory setting of external static pressure is shown without < >. Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Be sure to install a valve on the water outlet.
6.Install a strainer (40 mesh or more) on the pipe n ext to the valve to remove the foreign matters.
7.Please group units that operate on 1 branch.
MEES17K198
referred to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
kcal/h =kW x 860
BTU/h =kW x 3,412
cfm =m
lbs =kg / 0.4536
*Above specification data is
subject to rounding variation.
3
/min x 35.31
4
2. EXTERNAL DIMENSIONS
2. EXTERNAL DIMENSIONS
PEFY-WP20, 25, 32, 40, 50VMA-E
Note 1.Use M10 screw for the Suspension bolt (field supply).
2.Keep the service space for the maintenance at the bottom.
3.This chart indicates for PEFY-WP40·50VMA-E models,
which have 2 fans.PEFY-WP20·25·32VMA-E models
have 1 fan.
4.In case of the inlet duct is used,remove the air filter
(supply with the unit),then install the filter
(field supply) at suction side.
21018
side view
Inlet air
Air Filter
Water pipe
(To HBC unit)
Rc3/4 screw
Water pipe
(From HBC unit)
858800G658
1058
F
600
1000
7
E
11
D
660800
1060
C
1000
1200
B
1154PEFY-WP40,50VMA-E
A
700 754
900 954 860 9
1100
Model
Unit: mm
PEFY-WP-VMA-E
Top view
Suspension bolt hole
4-14×30 Slot
2×E-ø2.9
15
Outlet air
side view
G21
C
B(Suspension bolt pitch)
A
Air
inlet
Air
outlet
10
100
100×(E-1)=F
D (Duct)
23
Control box
Drain pipe
732
643(Suspension bolt pitch)
238
57
32 700
64
30
20
side view
Piping
58
Water pipe(To HBC unit)
Rc3/4 screw
2
40
PEFY-WP20VMA-E
PEFY-WP25,32VMA-E
41
Drain pump
(O.D.ø32)
10
40
23
To p
250
217
91 64
100
178(Duct)
Terminal block(Power source)
Terminal block(Transmission)
Drain pipe(O.D.ø32)
(Spontaneous draining)
356
87117
2×2-ø2.9
Bottom
Water pipe(From HBC unit)
Rc3/4 screw
1
MEES17K198
5
2. EXTERNAL DIMENSIONS
Ceiling concealed (Medium static pressure type)
PEFY-WP20, 25, 32, 40, 50VMA-E
PEFY-WP-VMA-E
Less than 300mm
0
-10
65
(Actual length)
H
Less than 700mm
<accessory>
Drain hose (I.D.ø32)
J×(L-1)=M
H
6
JK
J
N-ø2.9
Unit: mm
112 1111 2
Min.300mm50 700
P
Electric box
S
Bottom of
indoor unit
50
Maintenance access space
777
Access door 4
(Viewed from the direction
of the arrow B)
Fig.5
[Maintenance access space]
Secure enough access space to allow for the maintenance, inspection, and replacement of the motor, fan, drain pump, heat exchanger,
and electric box in one of the following ways.
Select an installation site for the indoor unit so that its maintenance access space will not be obstructed by beams or other objects.
(1)When a space of 300mm or more is available below the unit between the unit and the ceiling. (Fig.1)
·Create access door 1 and 2 (450×450mm each) as shown in Fig.2.
(Access door 2 is not required if enough space is available below the unit for a maintenance worker to work in.)
(2)When a space of less than 300mm is available below the unit between the unit and the ceiling.
(At least 20mm of space should be left below the unit as shown in Fig.3.)
·Create access door 1 diagonally below the electric box and access door 3 below the unit as shown in Fig.4.
or
·Create access door 4 below the electric box and the unit as shown in Fig.5.
Min.300mm
450
700
475
Access door 1
100~200
450
Electric box
(450×450)
Min.10mm
Intake air
Ceiling beam
Electric box
Supply air
Access door 2
P
Maintenance access space
450
Bottom of indoor unit
450
Q
50~150
(450×450)
Ceiling
A
Fig.1
Access door 2(450×450)
Min.300mm
(Viewed from the direction of the arrow A)
Fig.2
700
50
450
475
100~200
450
Access door 1
(450×450)
Electric box
Ceiling beam
Electric box
Intake air
Supply air
P
Bottom of
indoor unit
R
Min.10mm
Min.20mm
Ceiling
B
Fig.3
Access door 3
P
700
900
50
Maintenance access space
777
(Viewed from the direction of the arrow B)
Fig.4
Access door 3
N
M
L
K
J
101010
780
4
300
150
260
1100
990
449
330PEFY-WP40,50VMA-E 1200250~350 1700
Model H RQS
PEFY-WP20VMA-E 44 50~150 800 1300
PEFY-WP25,32VMA-E 1000150~250 150054
MEES17K198
6
2. EXTERNAL DIMENSIONS
PEFY-WP63, 71, 80, 100, 125VMA-E
(supply with the unit),then install the filter
(field supply) at suction side.
2. Keep the service space for the maintenance at the bottom.
3. In case of the inlet duct is used,remove the air filter
Note 1. Use an M10 screw for the Suspension bolt (field supply).
210
side view
Inlet air
Air Filter
Water pipe
(To HBC unit)
Rc1-1/4 screw
Water pipe
(From HBC unit)
1058
FG
1000
1300 1358
1500 1558
E
11
D
1060
C
1200
1700 1615601600 1654
1500 1413601400 1454
B
1154
1100
Unit: mm
PEFY-WP-VMA-E
18
Top view
Suspension bolt hole
4-14×30 Slot
15
2×E-ø2.9
G21
C
A
Air
inlet
Air
outlet
100×(E-1)=F
D (Duct)
B(Suspension
100
bolt pitch)
23
643(Suspension bolt pitch)
57
10
64
30
20
58
732
side view
Piping
Model A
Control box
41
Drain pump
Drain pipe
238
10
32 700
23
PEFY-WP63VMA-E
PEFY-WP71,80,100VMA-E
PEFY-WP125VMA-E
250
217
(O.D.ø32)
60 69
40
To p
100
178(Duct)
Terminal block(Power source)
Terminal block(Transmission)
Drain pipe(O.D.ø32)
(Spontaneous draining)
356
69126
2×2-ø2.9
Bottom
Outlet air
side view
MEES17K198
Water pipe(To HBC unit)
Rc1-1/4 screw
2
40
Water pipe(From HBC unit)
Rc1-1/4 screw
1
7
2. EXTERNAL DIMENSIONS
Ceiling concealed (Medium static pressure type)
PEFY-WP63, 71, 80, 100, 125VMA-E
Less than 700mm
PEFY-WP-VMA-E
Drain hose (I.D.ø32)
Less than 300mm
0
-10
65
(Actual length)
<accessory>
H
JJ
J×(K-1)=L
J
H
6
M-ø2.9
Unit: mm
112 11112
indoor unit
Access door 4
50
777
of the arrow B)
(Viewed from the direction
Fig.5
20005
17004
Q
1200
1500
22005
1700
Min.300mm
50 700
Electric box
N
Bottom of
R
(1) When a space of 300mm or more is available below the unit between the unit and the ceiling. (Fig.1)
·Create access door 1 and 2 (450×450mm each) as shown in Fig.2.
(Access door 2 is not required if enough space is available below the unit for a maintenance worker to work in.)
(2) When a space of less than 300mm is available below the unit between the unit and the ceiling.
(At least 20mm of space should be left below the unit as shown in Fig.3.)
·Create access door 1 diagonally below the electric box and access door 3 below the unit as shown in Fig.4.
or
[Maintenance access space]
Secure enough access space to allow for the maintenance, inspection, and replacement of the motor, fan, drain pump, heat exchanger,
and electric box in one of the following ways.
Select an installation site for the indoor unit so that its maintenance access space will not be obstructed by beams or other objects.
·Create access door 4 below the electric box and the unit as shown in Fig.5.
Min.300mm
450
700
475
100~200
450
Electric box
Access door 1
(450×450)
Access door 2
Min.10mm
Intake air
Ceiling beam
Electric box
Supply air
N
Maintenance access space
450
Bottom of indoor unit
P
450
50~150
(450×450)
Ceiling
A
Fig.1
Access door 2(450×450)
(Viewed from the direction of the arrow A)
Fig.2
Min.300mm
450
700
475
50
100~200
450
Electric box
Access door 1
(450×450)
Ceiling beam
Electric box
Intake air
Supply air
N
Bottom of
indoor unit
Q
Min.10mm
Min.20mm
Ceiling
B
Fig.3
Access door 3
400~500
500~600
250~350
50
N
Maintenance access space Maintenance access space
1100
1600121480370
1400121280320
M
10
L
990
K
777
(Viewed from the direction of the arrow B)
JP
330
Fig.4
Access door 3
HR
54
54
49
Model
PEFY-WP63VMA-E
PEFY-WP71,80,100VMA-E
PEFY-WP125VMA-E
MEES17K198
8
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use