Mr. Slim systems are unlike any other
products in the HVAC category. Actually they’re
a category in themselves because Mr. Slim is
probably the most unique innovation in air
comfort in two decades and one that has made
us the worldwide leader in ductless.
We designed Mr. Slim air conditioners and
heat pumps to solve cooling and heating
problems that other systems have never
addressed, specifically spot or zone cooling
and heating especially in retrofit situations.
These are voids in comfort that central air and
room air simply can’t fill economically and
attractively.
AND HEAT PUMPS
Where Mr. Slim Fits.
You’ll often encounter a hot or cold spot in
existing buildings that already have large
central systems. Is the answer to remodel and
make way for more ductwork? Obviously that’s
a small fortune. Should you opt for room air?
It’s unsightly at best, expensive to run, and a
real security hazard.
Now you’re beginning to see how Mr. Slim
fits in. It’s the ideal supplemental system for
cooling or heating those smaller zones with
absolutely no ductwork, no remodeling, and
few disruptions to business and traffic.
Our system is energy
efficient and whisper quiet.
Its remote control keeps all
operating functions and
data within a glance and
in easy reach. And it
neatly tucks away into
corners, blending in
with the room’s decor.
How Mr. Slim
Works.
Basically Mr. Slim is two units: an indoor air
handler and an outdoor compressor unit.
The two connect via refrigerant lines
through a three inch diameter opening in the
wall or ceiling. In fact that’s the toughest part of
installation: one hole.
You can locate the compact outdoor
compressor unit anywhere up to 164 feet away
from the air handler on select models: in many
cases. Many models have a front service panel
that clearly exposes all connections.
The indoor air handler is as easy to install
as a ceiling fan. And both the indoor and
outdoor units are microprocessor controlled.
Simple remotes let you control all functions.
Highly advanced microprocessor technology is
one reason why Mitsubishi leads the air comfort
category. This ultrathin microprocessor remote
controller with LCD display gives you a variety of
functions and options to keep room comfort
• Computerized Dehumidification
• Operation Mode Setting (Heat, Auto, Cool/Dry)
• Temperature Setting (in units of two
degrees fahrenheit.)
• Self-Diagnostic Display
• Room Temperature Display
• Twenty-Four Hour On/Off Timer
• Fan Speed Indicator
• Auto/Swing Vane Operation
• Memory (for storing operation functions)
• Low Ambient Operation
• Whisper-Quiet Operation
• EMS Gateway Available To Management System
Via RS-232 Cable
Remote Controller
perfectly balanced. It lets you
check Mr. Slim’s operating
conditions with just a glance. In the
rare case of a malfunction the selfdiagnostic system even indicates
specific problems for easy repair.
Mr. Slim heat pumps also feature automatic
cooling/heating changeover for simple control
and lower maintenance. You never have to
readjust the unit.
Air Flow
These units offer a wide choice of air flow
directions. In the heating mode the vanes
automatically set the flow of warm air downward
at an angle of seventy degrees
cooling mode the vanes automatically set the
flow of cool air outward (horizontally). But you
can override the automatic setting to blend air
flow. Four directions may be selected: one
hundred percent downward, eighty percent
downward and twenty percent horizontal, sixty
percent downward, and forty percent horizontal
or one hundred percent horizontal. Jumbo
louvers automatically rotate right and left for
uniform air distribution over your entire space.
fahrenheit
. In the
Outdoor Compressor Unit
Mr. Slim outdoor compressor units are
extremely efficient and reliable and true spacesavers.
These models can be installed up to 164
feet away from the indoor unit. They connect
simply through a single three-to-four inch
opening in the wall or ceiling. No ductwork or
remodeling is necessary. As many as ten units
can be installed in a row for major space
savings.
Outdoor units are designed with a frontaccess service panel that provides easy access
to all maintenance points.
These units operate in outdoor
temperatures as low as zero
when the optional wind baffle is
installed. So you can cool spaces
such as computer rooms year
round.
degrees fahrenheit
Redi-Charged System
Mr. Slim “P” series features the industry’s
first redi-charged refrigerant system. There’s no
longer any need to adjust the amount of
refrigerant to match the piping length on-site
unless lines exceed one hundred feet. You’ll
see a major reduction in installation time and
labor costs. Plus you can always count on Mr.
Slim’s reliability from day one because it’s
thoroughly charged and tested at the factory.
You know it’s going to work.
Hot Start System
Mr. Slim heat pumps provide warmth right
from the beginning. At the start of heating and
during defrosting, a very low fan speed
prevents the unit from blowing cold air into
the room. And a microprocessor-controlled
booster heater speeds the warming process.
Mr. Slim’s streamlined design makes indoor
units adaptable to an almost infinite variety of
room configurations. They’re simple to mount,
and they require a minimum of wiring. Naturally
they’re not only efficient but also whisper-quiet.
You’ll hardly hear them running.
Highly advanced microprocessor technology
is one reason why Mitsubishi leads the air
comfort category . This ultra-thin microprocessor
remote controller with LCD display gives you a
variety of functions and options to keep room
comfort perfectly balanced. It lets you check Mr .
Slim’s operating conditions with
just a glance. In the rare case of
a malfunction the self-diagnostic
system even indicates specific
problems for easy repair.
• Computerized Dehumidification
• Operation Mode Setting (Heat, Auto, Cool/Dry)
• Temperature Setting (in units of two
degrees fahrenheit.)
• Self-Diagnostic Display
• Room Temperature Display
• Twenty-Four Hour On/Off Timer
• Fan Speed Indicator
• Auto/Swing Vane Operation
• Memory (for storing operation functions)
• Low Ambient Operation
• Whisper-Quiet Operation
• EMS Gateway Available To Management System
Via RS-232 Cable
Outdoor Compressor Unit
Mr. Slim outdoor compressor units are
extremely efficient and reliable and true spacesavers.
These models can be installed up to 164
feet away from the indoor unit. They connect
simply through a single three inch opening in
the wall or ceiling. No ductwork or remodeling is
necessary. As many as ten units can be
installed in a row for major space savings.
Outdoor units are designed with a frontaccess service panel that provides easy access
to all maintenance points.
These units operate in outdoor
temperatures as low as zero degrees
fahrenheit. when the optional wind
baffle is installed. You can,
therefore, cool spaces such as
computer rooms year round.
Mr. Slim heat pumps also feature automatic
cooling/heating changeover for simple control
and lower maintenance. You never have to
readjust the unit.
Air Flow
These ceiling cassettes offer multidirectional air flow in a number of various
patterns to direct heat or cool air where you
need it most. You can use two, three, or four
vents and even set the vents for a narrow or
wide breeze, depending on whether you prefer
a strong, directed stream of air or a gentle
breeze over a wide area. Air outlet vanes inside
the vents automatically swing up and down for
uniform air distribution.
Redi-Charged System
Mr. Slim “P” Series features the industry’s
first redi-charged refrigerant system. There is
no need to adjust the amount of refrigerant to
match the piping length on-site unless lines
exceed 100 feet. You’ll see a major reduction in
installation time and labor costs. Plus you can
always count on Mr. Slim’s reliability from day
one because they’re thoroughly charged and
tested at the factory. You know it’s going to
work.
Hot Start System
Mr. Slim heat pumps provide warmth right
from the beginning. At the start of heating and
after defrosting, a very low fan speed prevents
the unit from blowing cold air into the room. And
a microprocessor controlled booster heater
speeds the warming process.
The unit is specially designed for neat and tidy
installation. With minimum on-site work, branch
ducting and outside air ducting can be installed.
Branch Duct
12 Inch
10 Inch
Unit Height Drain Height Panel Height 1 Inch
Simplified Installation
Mr. Slim Ceiling Cassettes install as easily as
track lighting and make an extremely neat,
unobtrusive presentation. They require only a
21
minimum of wiring. Naturally they’re not only
efficient but whisper quiet, too. You’ll hardly hear
them running.
These models also feature a drain water lift-up
mechanism that saves space and makes drainage
pipe connection surprisingly simple.
Refrigerant lines may be connected to the
outdoor unit from the front, rear , or side or beneath
the base. This easy-access design lets you
arrange and install a number of units in a small
area.
Warranty
Mitsubishi is so confident of the reliability
of Mr. Slim
warranty on the compressor and a one year
warranty on all other parts.
W in.34-1/434-1/434-1/434-1/438-3/1638-3/1634-1/434-1/438-3/1638-3/1638-3/16
Dimensions
D in.11-5/811-5/811-5/811-5/813-9/1613-9/1611-5/811-5/813-9/1613-9/1613-9/16
H in.25-9/1633-1/249-9/1649-9/1649-9/1649-9/1633-1/249-9/1649-9/1649-9/1649-9/16
Weight lbs.
105154207208220260131202245246268
REMOTE CONTROLLERWith indoor unit
Control Voltage (by built- in transformer)
Indoor unit-remote controller: DC 12V, Indoor unit-outdoor unit: DC 12V
REFRIGERANT PIPING SIZE
3/8, 5/81/2, 3/43/8, 5/81/2, 3/41/2, 7/8
Figures in parentheses include auxiliary booster heat.
* For 208 volt applications refer to
Indoor: 70˚F DB, 60˚F WB Outdoor: 47˚F DB, 43˚F WB
*2. Include auxiliary electric heater operations at 115V. (MSH09EW, MSH12EN, MSH15EN)
*3. Rated voltage of compressor and fan motor is 115V. (MUM18EW)
*4. Values are for each indoor unit.
*5. Depth of outdoor unit ( ) includes thickness of fan grille.