General-Purpose AC Servo
Manual Pulse Generator
Model
MR-HDP01
Installation Guide
1. SPECIFICATIONS
Power supply
Interface Maximum output current: 20 mA for open collector output
Pulse signal form A-phase/B-phase, 2 signals of 90˚ phase difference
Pulse resolution 100 pulses/rev
Maximum speed Instantaneous maximum: 600 r/min, normal: 200 r/min
Temperature range for operation -10 °C to 60 °C
Temperature range for storage -30 °C to 80 °C
C
Item Specifications
Voltage 4.5 V DC to 13.2 V DC
Consumption current 60 mA or less
Thank you for choosing this product. This guide is the installation guide for the
Manual Pulse Generator (MR-HDP01). To ensure safety, always read through this
guide and the instruction manual of the servo amplifier used before usin g this
product. What is not written in this guide is described in the instruction manual of
the servo amplifier.
Please forward this guide and other attached documents to the customer who will
use this product. Also, always keep this guide and other documents.
2. DIMENSIONS
Packing t2.0
3.6
3-M4 stud L10
P.C.D72 Equal intervals
[Unit: mm]
φ50
φ70
16 20
3. MOUNTING
Panel cut
4. TERMINAL ASSIGNMENT
+5 to
12V AB
0V
Signal name Description
6
φ
φ
+5 to 12V Power supply input
0V Common for power and signal
A A-phase output pulse
B B-phase output pulse
φ60 ± 0.1
0.27 ± 0.5
3-φ4.8
Equal intervals
2
0
+
2
2
.
0
±
2
7
φ80 ± 1
Invalid to use except M3 × 6
8.89 7.6
[Unit: mm]
IB(NA)67182ENG-C(1704)MEE Printed in Japan Specifications are subject to change withou t notice.
HEAD OFFICE: TOKYO BLDG MARUNOUCHI TOKYO 100-8310
Loading...