Mitsubishi M62458FP Datasheet

MITSUBISHI SOUND PROCESSOR
PRELIMINARY
Notice ; This is not a final specification.
some parametric limits are subject to change.
SRS-Headphone 3D Sound Processor
OUTLINE
M62458FP is an SRS-Headphone 3D sound processor for Headphone,Speaker and Audio equipment. This IC has only SRS-Headphone circuit and packed in a small 14-pin SOP.
FEATURES
SRS-Headphone 3D sound circuit SRS on/off function switch included
M62458FP
SRS 3D SOUND PROCESSOR
PACKAGE OUTLINE
14Pin SOP
Size : 10.1mm X 5.3mm X 1.8mm
APPLICATION
Headphone,Speaker, etc
RECOMMENDED OPERATING CONDITION
Supply voltage range 4.5~12.0V Rated supply voltage 5V
SYSTEM BLOCK DIAGRAM
L
SRS-Headphone
3D Sound
R
Note !!
SRS,the SRS logo,Sound Retrieval System and "everything else is only stereo" are registered trademarks of SRS Labs, Inc. This device available only to licensees of SRS Lab,Inc. Licensing and application information may be obtained from SRS Lab, Inc. Mitsubishi Electric Corporation assumes no responsibility for any damage,or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
SRS on/off
MITSUBISHI
ELECTRIC
( / )
MITSUBISHI SOUND PROCESSOR
PRELIMINARY
Notice ; This is not a final specification.
some parametric limits are subject to change.
BLOCK DIAGRAM
RP
Lout
8
910
REF
M62458FP
SRS 3D SOUND PROCESSOR
7
LP
6
REF IN
LN
Rout
F2
RN
F3
11
12
13
14
SRS-HEADPHONE 3D SOUND
5
GND
4
Lin
3
Rin
2
Vcc
SRS
1
ON/OFF
MITSUBISHI
ELECTRIC
( / )
Loading...
+ 4 hidden pages