Mitsubishi M62253FP Datasheet

MITSUBISHI(Dig.Ana.INTERFACE)
PRELIMINALY
PRELIMINALY
Notices;This is not a final specification.
Some parametric limits are subject to change.
LITHIUM ION BATTERY CHARGER CONTROL IC
GENERAL DESCRIPTION
The M62253FP is a charge controller designed for charging lithium ion batteries. The IC has a current and voltage control circuit allowing the constant current/voltage charging to lithium ion batteries. A charger system for lithium ion batteries can be easily designed by utilizing the IC`s following functions ;
• charge disabling function for an over discharged battery
• charge control function by detecting the battery temperature
FEATURES
• Constant current and voltage charging
• Charge disabling functions for an over discharged battery and a high/low temperature battery
• Recharging function
• 2 LED driving circuits to Indicate charging conditions
• Delay circuit to prevent chattering
M62253FP
PIN CONFIGURATION(TOP VIEW)
TIN
C3
Vref VDD
Vcc LED1 LED2
1 2 3 4 5 6
M62253FP
7
Outline 14P2N-A
14 13 12 11 10
9 8
OUT SENSE+ SENSE ­VSENSE GND C2 C1
APPLICATION
Lithium ion battery charger for digital equipment
BLOCK DIAGRAM
Vref
3.0V
2.6V
VDD
Std. VOLTAGE
4.1V to 3.9V
Incorrect detect prohibition circuit
LED2
LED1
C1
Incorrect detect prohibition circuit
Incorrect detect prohibition circuit
Vcc
OE
Fixed current control circuit
ISET
OE
Fixed voltage control circuit
VSET
OUT
ISENSE+ ISENSE-
OUT
VSENSE
Current detect circuit
1.64V
VDD
R1
3.54V
R2
OUT SENSE+
SENSE-
VSENSE
VDD
R1
R2
TIN
GND
( / 5 )
1
C2C3
MITSUBISHI(Dig.Ana.INTERFACE)
PRELIMINALY
PRELIMINALY
Notices;This is not a final specification.
Some parametric limits are subject to change.
EXPLANATION OF TERMINALS
Pin No.
Symbol
1
TIN 2 C3 3
4
Vref VDD
Temperature detection (also using for battery connect detection)
Setting delay time of temperature detection (Tpd=50ms at 0.1µF)
Reference voltage of internal circuit.
5.0V reference voltage
M62253FP
LITHIUM ION BATTERY CHARGER CONTROL IC
Function
5 Vcc
6,7
8
9 10 11 12 13
14
LED1,2
C1
C2
GND
VSENSE
SENSE-
SENSE+
OUT
Power supply
LED connection (LED1 is on during charging, LED2 is on at charge completion.)
Setting delay time of voltage detection (Tpd = 1.20sec at 2.2µF)
Setting delay time of current detection (Tpd = 1.30sec at 2.2µF) Ground Battery voltage detection Charging current detection
Charging current detection Output (open collector configuration)
( / 5 )
2
Loading...
+ 3 hidden pages