Mitsubishi JT-MC206GS-W-E Instruction Manual
− 1 −
GB
Hand dryer
1209875HF0401
MODEL
JT-MC206GS-W-E
Unit color -W
（White）
INSTRUCTION MANUAL
■ Read the manual thoroughly before using the unit to ensure it is used safely and correctly.
After reading the manual, store it in an easily accessible location for future reference.
You should not attempt to install the unit yourself,
as this may affect the safety and functionality of the unit.
This unit is intended for the purpose of drying hands and is not covered by a warranty if used for any other purpose.
It has no sterilizing or disinfecting functions.
INDEX
Safety Precautions
2
Names of Parts
3
How to use the unit
4
■ How to open/close the front cover
4
Precautions for when opening/closing the front cover
4
■ Turning the power on
5
■ If not using for a long period
5
■ How to use the unit
5
■ Turning the heater on
6
■ Adjusting the air speed
6
Maintenance
7
Precautions for when opening/closing the front cover
7
① Turning the power off before maintenance
8
② Cleaning the unit exterior and hand drying area
8
③ Cleaning the air filter
9
④ Cleaning the drain tank
10
Trouble shooting
11
Specifi cations
12
Location of Model Name display
Location of power supply voltage display
Single-phase 220 – 240V AC
For User
− 2 −
Safety Precautions
The dangers arising from improper handling and the extents of the dangers are classifi ed and explained as shown below.
Prohibited
Do not install in locations where they may be
leakages of combustible gas.
This may cause fires.
Do not use at locations where salt damage
may occur or where corrosive, neutral or
reductive gases are present.
The above may cause fire, electric shocks or
malfunctions.
Do not
disassemble
Do not modify or disassemble the unit.
Doing so may result in fires, electric shocks or
injuries.
When changing the installation place, consult
your dealer or installer.
There is a risk of injury.
Important !
Follow
instructions.
Use single- phase 220 – 240V AC power.
Using the incorrect power supply may cause fires,
electric shocks or malfunctions.
Use exclusive wiring for the power source.
Using this unit with other devices on a branch
socket may cause abnormal heat, which may
cause fires.
Always turn off the power switch during
maintenance work.
Failure to do so may result in an electric shock.
This unit is not intended for use by young
children or infirm persons unless they are
adequately supervised by a responsible
person to ensure that they can use the unit
safely.
Do not use
in the baths/
shower room.
Do not use in a shower room or other
locations with a great deal of humidity in the
air or where condensation may form on the
unit.
This may cause electric shocks or malfunctions.
Do not allow
the unit
to get wet.
Do not allow water to get on the unit.
This may cause electric shocks or malfunctions.
Warning
The following may lead to death or
serious personal injury if handled
incorrectly.
Prohibited
Do not let children hang from the unit.
Young children should be supervised to ensure
that they do not play with the unit.
Do not use for purposes other than drying
hands.
Inappropriate use may cause an accident.
Do not open the front cover too far.
The front cover may come off, fall and cause
injury or damage.
※ The front cover is designed to come off in
order to prevent damage if it is opened at a 90°
angle or more. (refer to Page 4)
Important !
Follow
instructions.
Wear gloves during maintenance work.
Not doing so may result in injuries.
Always use the unit with the drain tank, air
filter and front cover attached.
Any water entering the unit may cause short
circuits, electric shocks or damage.
If the unit stops working or if a malfunction
occurs, turn off the power switch and
ground fault circuit interrupter to prevent an
accident before contacting your dealer for an
inspection and repairs.
Failure to do any of the above may result in electric
shocks or short circuits or fires due to short circuiting.
Caution
The following may lead to minor
injuries or damage to property if the
unit is handled incorrectly.
NOTE
Do not use in the following locations.
Outdoors Locations where the temperature could be lower than 0C. Locations where there is a lot of dust.
Locations where the temperature could be higher than 40C. Locations where there is a lot of condensation.
Locations where salt damage may occur. In vehicles (including ships and airplanes) Near food or tableware
Locations where the unit is in direct or strong sunlight (may cause the sensor to malfunction).
Kitchens (Where there is a risk of water splashing.)
Locations where the unit may come into direct contact with water.
Rooms that have a sterilization basin, swimming pools baths.
Locations where corrosive, neutral, or reductive gasses are present. (This may shorten the working life of the unit and/
or cause malfunctions.)
Do not use with chemicals on your hands.
(This may damage the surface of the unit or cause discoloration or cracking.)
Please thoroughly wipe off any detergents or chemicals that may be on the unit. Do not use any detergents
other than those that have been prescribed.
(Failure to do so may damage the surface of the unit, or cause discoloration or cracking.)
Please refer to "Maintenance" (Page 7) for details on detergents.
If water enters the unit, do not let the air fi lter or intake area come in close contact with water as this may cause
the machine to malfunction or cause the acoustic materials to absorb water and allow bacteria to grow.
− 3 −
Power light
Front cover
Lid
Drain tank
Water
receiver
area
Hand
drying
area
Air fi lter
Power switch
Setting switches
Open
Power light
Air speed light
Air speed
switch
Heater switch
Heater light
Front cover
Nozzle
Sensor
Names of Parts
※ Shaded areas in the fi gure indicate antibacterial material (excluding outlet nozzle areas).
Inside the front cover
(Refer to "How to open/close the front cover" on page 4)
Please refer to "Turning the heater on" (Page 6) while turning the
heater on/off.
Please refer to "Adjusting the air speed" (Page 6) while adjusting
the air speed.
− 4 −
How to use the unit
■ How to open/close the front cover
1
Pull the tab for opening the
front cover.
2
Hold the handle are on the
right hand side of the main
unit.
3
Open.
Close the front cover with the procedures for
opening it in reverse.
Close the front cover so that there
is no gap between the front cover
and the main unit and push the tab
in to latch the front cover shut.
NOTE
Check to see that the front cover is fitted securely.
Press the front cover on the upper and lower parts
against the main unit so that it is securely closed.
Main
unit
Main
unit
Gap
① Close the right side ② Close the left side (both the
upper and lower parts)
Front
cover
Front
cover
Ta b
Main
unit
Front cover
Handle
Open
Precautions for when opening/closing the front cover
If the front cover comes off, please reattach it with the
f
ollowing procedures.
※ It is designed to come off in order to prevent damage if it
is opened too far.
1
Press the bottom connecting part of the
removed front cover into the bottom panel
hook of the unit.
2
Press the top connecting part of the front
cover into the top panel hook of the unit.
3
Check that the front cover is fi tted securely.
Click
Gap
Connecting
part of the
front cover
Panel
hook of
the unit
Make sure that there is no gap
between the front cover and the
unit when the front cover is closed.
Pull
Ta b
Push
How to close the front cover
How to open the front cover
− 5 −
ON
OFF
ON
OFF
Power
ON
OFF
ON
OFF
Power
Turn the power switch "OFF".
Rub your hands together after the
water is blown off.
The dryer starts automatically when your hands
enter the hand drying area.
※ Refer to "Hand detection area"
Caution
Do not use with disinf
ectants such as
alcohol or chemicals on your hands.
(This may damage the unit.)
■ Turning the power on
■ If not using for a long period
■ How to use the unit
1
Open the front cover.
Refer to "How to open/close the front cover" on
page 4.
3
Close the front cover.
Refer to "How to open/close the front cover" on
page 4.
2
Turn the power switch "ON".
The power light (blue) turns on.
Pull the tab.
Open
P
ower switch
About 9cm
Hand drying area
Hand detection area
Nozzle
Sensor
• Please use within the area above.
※ The hand detection area may differ depending on the environment.
Power switch
Power "ON"
Power "OFF"
Caution
Do not turn the po
wer on when your hands or an object are
inside the hand drying area.
The sensitivity of the sensor may be reduced if the power is turned
on while your hands or objects are inside the hand drying area.
If the sensitivity of the sensor is reduced, please turn the power off
and then back on after one minute.
Power "OFF"
Automatic Stop Function
The power light fl ashes and the dryer stops automatically if the unit is used continually for more than 40 seconds.
To continue using the hand dryer, remove your hands, and then re-insert them.
Power light
Loading...