Mitsubishi DX-TL4716U INSTALLERʼS MANUAL

DIGITAL RECORDER

INSTALLERʼS MANUAL

MODEL

DX-TL4716U

THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

The lightning ﬂ ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁ cient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

AVERTISSEMENT

DANGER D’ÉLECTROCUTION

NE PAS OUVRIR

AVERTISSEMENT:

CUTION, NE PAS OUVRIR LE COUVERCLE (OU LA PARTIE ARRIÈRE). AUCUNE PIECE RÉPARABLE PAR L’UTILISATEUR NE SE TROUVE À L’INTÉRIEUR. POUR TOUTE INTERVENTION D’ENTRETIEN OU DE RÉPARATION SE CONFIER AUX TECH NICIENS QUALIFIÉS.

La ﬂ èche symbolisant l’éclair dans un triangle équilateral a pour objet de tirer l’attention de l’utilisateur sur le fait, qu’ il y a des “tensions dangereuses” non-isolées à l’intérieur de l’enceinte du produit qui peuvent être sufﬁ samment importantes pour conduire au risque d’électrocution.

POUR ÉLIMINER TOUT RISQUE D’ÉLECTRO-

Le point d’exclamation au sein d’un triangle équilateral a pour objet de tirer l’attention de l’utilisateur sur le fait qu’ il y a des instructions de mise en service et d’entretien (de réparation) dans les ﬁ ches descriptives de l’appareil qui doivent obligatoirement être respectées.

AVERTISSEMENT:

AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE NI À L’HUMIDITÉ.

ATTENTION:

POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE PAS UTILISER CETTE FICHE POLARISÉE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ÊTRE INSÉRÉES À FOND SANS EN LAISSER AUCUNE PARTIE À DÉCOUVERT.

Beginning

Important safeguards

PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR RECORDER AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE RECORDER.

1. Read Instructions

All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future reference.

3. Heed Warnings

All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions

All operating and use instructions should be followed.

5. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture

Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories

Do not place the product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. Power Sources

This product should be operated only from the type of power source indicated on the marking label. For products intended to operate from battery power, other sources, refer to the operating instructions.

11. Grounding or Polarization

This product is equipped with a 3-wire groundingtype plug, a plug having a third (grounding) pin. This plug will only ﬁ t into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

12. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cord at plugs, convenience receptacles, and the point where they exit from the appliance.

13. Lightning

For added protection for this product receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and powerline surges.

iii

14. Overloading

Do not overload wall outlets and extension cords as this can result in a risk of ﬁ re or electric shock.

15. Object and Liquid Entry

Never spill liquid of any kind on the product.

16. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁ ed service personnel.

17. Damage requiring Service

Unplug this product from the wall outlet and refer servicing to qualiﬁ ed service personnel under the following conditions:

(a) When the power-supply cord or plug is

damaged.

(b) If liquid has been spilled, or objects have fallen

into the product.

water.

(d) If the product does not operate normally by

following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualiﬁ ed technician to restore the product to its normal operation.

(e) If the product has been dropped or the cabinet

has been damaged.

(f) When the product exhibits a distinct change in

performance, this indicates a need for service.

18. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts speciﬁ ed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

19. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.

20. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that product heat.

21. This equipment does not provide connection for used with outdoor or cable distribution systems.

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-003 DU CANADA.

Beginning

Caution and care

HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)

NEVER REMOVE THE TOP COVER AND TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT

Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage.

PROTECT THE POWER CORD

Damage to the power cord may cause ﬁ re or electrical shock. If the power cord is damaged, turn OFF the MAIN switch and carefully replace it with a new power cord. Do not move this product with the power-on as the built-in HDD may be damaged. If you need to move the product, turn the unit OFF and disconnect power from the unit. Conﬁ rm that more than one minute have passed since the power cord and the connecting cords were disconnected, then move this unit. Make sure to take the disc out and close the disc loading slot.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the power and unplug the power cord during a long absence.

MAINTAIN GOOD VENTILATION

Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place the unit on a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the unit.

WHEN NOT IN USE

When not in use, always eject the disc and turn OFF the MAIN switch.

CABINET CARE

Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry. PVC cables or leads should not be left in contact with the cabinet surface for long periods.

INSTALLATION LOCATION

For excellent performance and lasting reliability install in a location that is:-

1. Well ventilated, out of direct sunlight and away from direct heat.

2. A solid vibration-free surface.

3. Free from high humidity, excessive dust and away from magnetic ﬁ elds.

4. Please ensure that the ventilation fan located on the unit's back panel is not blocked.

UNSUITABLE LOCATIONS

Placing the unit in the following places might shorten the product life:

• Extremely cold places, such as refrigerated warehouses and ice houses

• Places where excessive hydrogen sulﬁ de is likely to be generated, such as hot-springs areas

• Places or locations with salt air environment.

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT PLACE HEAVY OBJECT ON THIS UNIT. DO NOT STEP ONTO THIS UNIT. DO NOT PLACE ANY OBJECTS IN FRONT OF THE DISC LOADING SLOT.

The unit may drop or fall by losing its balance. It may cause injury or failure of the unit.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

THIS APPARATUS MUST BE GROUNDED.

WARNING:

The supplied power cord is used for 120 V only. Never connect to any outlet or power supply having a different voltage or frequency.

Notice about construction of the surveillance system using this unit

• This unit can be controlled by the external devices via RS-232C terminal or LAN terminal. This unit can also be used to control external devices via external terminal, RS-422/485 terminal, or RS-232C terminal. Owning to these functions, this unit ﬂ exibly applies to the high grade security system, but the whole surveillance system may be affected by the malfunction of this unit or the external devices depending on the setting contents of this unit, the connection with the external devices, or combination between this unit and the external devices.

• When conﬁ guring a surveillance system using this unit, it is recommended to conﬁ rm ﬁ rst that this unit operates normally with the other devices connected.

• It is recommended to copy or back up the important recorded contents.

• Damages rising out of any operational error of the surveillance system or loss of the recorded data or any other damages because of any user malfunction of this unit are not covered.

• Do not use the notiﬁ cation function of this unit for making critical judgement nor any purpose related to human lives.

• When this unit cannot recognize the external device which is being used for recording due to the power failure, decreased voltage, or other failures, the recording point may be moved to the internal HDD of this unit or the other external HDD. To prevent occurence of such problem, it is recommended to use uninterruptible power supply.

• If the power plug is disconnected or the breaker switch is turned off during recording, HDD may be damaged or playback of recorded data may become impossible.

If the breaker switch is turned on and off everyday, set the timer recording to be performed only for the period that the

breaker is on and do not turn off the breaker during recording.

• It is recommended to check periodically that recording is perfomed successfully by playing back the recorded data.

There may be cases when the unit's built-in motion detection function does not operate properly due to external condition, video input signal, or other factors

The user will not be indemniﬁ ed for problems (e.g., recording failure or playback failure) that occur with either the unit or a connected device during operation. It is recommended to back up the important recordings regularly as a precaution against possible breakdowns and accidents

Recordable time and product warranty

Continuous recordable time and the estimated time displayed on the menu screen indicate the continuous time of recording operation of this unit. They indicate the period neither for product warranty nor that for reliability of used parts.

• This unit uses a built-in HDD, which is a precision device. Handle this unit with sufﬁ cient care.

• Do not subject this unit to vibrations or shocks. This may cause trouble specially when the power of the unit is turned on or when the HDD is being accessed, and sufﬁ cient care is required.

• Do not disconnect the power plug while the power of the unit is turned on or while recording or playing.

• For early detection of faults, we recommend that you request inspection once a year.

The HDD and cooling fan of this unit are driving parts. For stable recording, it is recommended that both of these parts are replaced every 30,000 hours. (This interval is for reference purpose only and does not indicate the warranty period of the parts.)

DISCLAIMER

In any event, Mitsubishi assumes no responsibility or reliability for the following:

1. Disassembly, repair, or alteration of this unit by user or installer.

2. Failure or breakdown in or damage to this unit resulting from misuse or careless handling by user or installer.

3. Inconvenience or damages arising out of inability to display or record pictures due to any reason or cause other than breakdown or failure in this unit.

4. Failure in this unit due to combination with other equipment manufactured by a third party or inconvenience or damages resulting from such failure.

5. Inconvenience, damages, or claims arising out of breakdown in this unit or loss of recorded video data due to replacement of the built-in HDD by user or installer.

6. Inconvenience or damages arising out of breakdown in this unit or inability to display or record pictures due to natural disaster including earthquake and storm.

7. Inconvenience, damages, or claims arising out of breakdown in this unit or loss of recorded video data due to impact or vibration to the built-in HDD or an environmental factor such as temperature at the installation site.

8. Demand for damages or other claim of infringement of privacy if the pictures monitored or recorded by user become public or are used for any purpose other than surveillance for whatever reason.

CLASS 1 LASER PRODUCT

Beginning

Caution and care (continued)

INSTALLATION LOCATION AND HANDLING

• Place this unit horizontally and in a stable place. If this unit is not placed correctly and used in an unstable place, the unit may be damaged such as removal of the DVD/CD disc.

• Do not place this unit close to other electronic or magnetic equipment. This will avoid video and audio distortion.

• When a monitor and this unit are placed vertically, the pictures may be distorted or DVD/CD disc may not be ejected.

• Do not let stick your hands into the disc loading slot. You may get your hand caught in the slot and may got injured. If you get your hand caught, do not get out of the slot by force. Contact your dealer after turning off the power and disconnecting the plug.

DVD/CD DISC

• Do not use the disc cracked, deformed or repaired with adhesive. The disc may ﬂ y into pieces and cause injury.

• Do not touch the playback surface when holding the disc.

• When dew condensation occurs on the disc, wipe the surface off before use.

• Dirt such as ﬁ ngerprints or dust causes the deterioration of the picture quality and audio quality. Gently wipe the DVD/CD disc from the center to the outside with a soft cloth.

• When the disc is very dirty, soak a soft cloth with water and screw water of it, wipe off the dirt lightly, then wipe with a dry cloth.

• Do not use solvent such as benzine and thinner, a record cleaner, and static-stopper. They may damage the disc.

• Do not use the disc described below. They may damage the disc itself or this unit.

Discs on which a piece of paper or sticker is put, or a disc damaged. Discs which the label is peeled or a disc with oozing. Discs cracked, deformed, or repaired with adhesive.

• Store the disc in the speciﬁ ed casing, avoiding the following places.

Places where it will be subjected to direct sunlight. Places with excessive dust. Places where it will be subjected to high temperatures or high humidity.

• DVD movie (cinema) or personal recorded picture cannot be played back on this unit. Only the pictures recorded on this unit can be played back.

• Do not use the disc which has been used on the personal computer, failed to be copied, or stopped during copying due to the power failure because they may cause malfunction of the unit.

• Although you can copy the data on DVD/CD with this unit and playback that data on the personal computer using the supplied application software, not all the personal computers or DVD/CD drives are ensured for proper playback of such data.

MAINTENANCE OF THE LENS FOR RECORDING/PLAYBACK (LASER PICKUP)

• When any dust adheres on the lens for recording/playback, the picture may be distorted or the audio may skip. Also normal recording or playback may not work. Ask your dealer how to correct this problem.

Be careful, do not use the commercial lens cleaning disc, they may damage the lens.

PRECAUTION CONCERNING EXTERNAL DEVICE

• The various external HDDs can be connected to this unit in order to expand the memory or to use as the copy device. However, during recording or playing back a picture at high rate, some pictures may be missed due to the slow rate of data transfer or the slow speed of response from the external device connected. Be sure to check the operation sufﬁ ciently in advance.

• Do not use the power control function of the external device which uses bus power of this unit.

• The external device to be used may be unsuitable for the operation you want to set. It is recommended to consult your dealer when using the external device.

Note

Thank you for purchasing Mitsubishi digital recorder DX-TL4716U (hereinafter referred to as “Product”). Before using this Product, please be sure to read the Software License Agreement on page 7 of the user's manual with regard to the software contained in this Product (hereinafter referred to as

bound by the terms and conditions of the following Software License Agreement.

This Product contains software programs that are covered by GNU General Public License or GNU Lesser General Public License. Such software programs are excluded from Licensed Software and not covered by the following Software License Agreement. For the terms and conditions for use of the software programs covered by GNU General Public License or GNU Lesser General Public License, please see “Notice about software to which GNU GPL/LGPL is applied”*.

In addition, this Product contains “Apache” and “OpenSSL (including “Original SSLeay” library).” These software programs are also excluded from Licensed Software and not covered by the following Software License Agreement. For the terms and conditions for use of these software programs, please see “Notice about Apache software”* and “Notice about OpenSSL software”*.

Each of “Berkeley Database,” “agetty,” “expat,” and “zlib” contained in this Product is other open source software. These software programs are excluded from Licensed Software and not covered by the following Software License Agreement. For the terms and conditions for use of these software programs, please see “Notice about other open source software”*.

* The documents of “Notice about software to which GNU GPL/LGPL is applied,” “Notice about Apache software,” “Notice

about OpenSSL software,” and “Notice about other open source software” are contained (in the format of electronic files as notice_GPL_LGPL_ja.pdf, notice_Apache_ja.pdf, notice_OpenSSL_ja.pdf, and notice_other_ja.pdf) in the “OpenSoft_License” folder in the CD supplied with this Product.

“

Licensed Software”). By using this Product, you are agreeing to be

Beginning

Features

DX-TL4716U is a digital recorder that is equipped with HDD as its main memory and 16ch triplex multiplexer. Addition to these features, this system has a very sophisticated video signal and data processing technique that provides high quality picture, stable operation and reliability. The graphical user interface and pointing devices make the operation very easy and comfortable in live monitoring and also in the handling of data from recording to export. The system offers excellent performance and has features to suit many video surveillance applications.

Refresh rates of 960pps*/system

Thanks to the newly developed multiplexing circuit, every camera can be viewed at 60 pps refresh rate in all screen formats.

pps* : picture per second

Triplex

User can view live and playback pictures on the same monitor in all screen multi-split layouts without disrupting recording.

Dual Multiplexer Outputs

The DX-TL4716U has two video outputs (Output A / B), and both of the outputs can show single-screen, 4, 9, 10, 13 and 16 split-screen, Switched Cameras, Alarmed Camera in live mode and Recorded pictures. On Screen Menu are shown only on monitor Output A. It is also possible to view playback pictures of different cameras at the same time with these two video outputs.

Covert Camera Function

It is possible to hide pictures of selected cameras that are installed in sensitive areas and should only be viewed by authorized personnel. It can be switched by <Multiplexer Setting>.

GUI

MENU, GUI (Graphical User Interface), guides the operators to their desired menu pages quickly. If the users need additional information on MENU functions, just press the HELP key and instructions will appear on screen. The menu supports English, French, and Spanish. Function keys on the front panel or USB mouse can operate the menu on the DX-TL4716U.

Recording rate up to 240 pps/system

Because of the new recording circuit and compression chip, the maximum recording speed is 240 pps in total, this means that the system can record pictures with speed of up to 15 pps on all 16 channels. With this speed recorded pictures are seen by the eye as real-time.

JPEG2000

The system uses JPEG2000 compression. JPEG2000 is the standard and ideal compression method for still pictures. Because pictures are compressed to a user defined file size one by one, the estimated recording time calculated by the system automatically is very accurate. Special playback search functions and transmission over network also beneﬁ t from this compression method. File sizes for each picture quality are minimized to improve storage efﬁ ciency over previous models.

Individual Recording Setting

Recording speed and picture quality (picture ﬁ le size) can be set for each camera individually, it is also possible to set alarm recording setting in addition to normal recording setting. By adjusting the recording speed and picture quality, it is possible to use HDD storage space efﬁ ciently.

Audio Recording

Audio input is featured. The audio such as cash register operation and conversation with customers can be recorded clearly together with the monitoring pictures.

Copy

User can make a copy of recorded picture data by using built in CD/DVD Drive on the DX-TL4716U. Or, also you can copy the data to other digital media such as HDD and USB Memory through Serial Bus Interface.

Microsoft is either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

All other company and product names appearing herein are the property of their respective owners.

Beginning

Contents

Important safeguards .................................................... iii

Caution and care ............................................................ 2

Note .................................................................................. 5

Features .......................................................................... 6

Contents .......................................................................... 8

Flowchart ....................................................................... 10

Flowchart for connection and settings .......................... 10

Major operations and their functions ......................... 12

Front view ..................................................................... 12

Front view (inside of the door) ...................................... 14

Loading/Ejecting a DVD or CD ..................................... 15

Rear view ...................................................................... 16

Connections .................................................................. 18

Connecting to CCTV camera, monitor, and sensor ...... 18

Alarm recording connection .......................................... 19

Clamping the cables ..................................................... 20

Connecting to an analogue video cassette recorder .... 20

Optional items ............................................................... 21

Recommended items .................................................... 21

Precaution concerning connection with HDD extension

unit ................................................................................ 21

How to set the menus .................................................. 22

Setting the menus ......................................................... 22

Setting the menu using a mouse ............................ 22

Setting the menu using the front panel buttons ...... 22

Displaying a menu screen ....................................... 23

Closing a menu screen ........................................... 23

Selecting an item .................................................... 23

Inputting numbers ................................................... 24

Setting parameters .................................................. 24

Symbols in the menus .................................................. 25

Setup Wizard ................................................................. 26

Setup Wizard ................................................................ 26

Menu chart .................................................................... 28

User Menu .............................................................. 28

Setup Menu ............................................................. 30

System Menu .......................................................... 37

User Menu

Search ........................................................................... 39

Selecting the search function ........................................ 39

Select Source Device ................................................... 39

Search by Time and Date ............................................. 39

Search by Alarm List ..................................................... 39

Find data storage location ............................................ 39

Search by Book Mark ................................................... 39

Search by Motion .......................................................... 40

Copy ............................................................................... 41

Copy Data to Copy 1 Drive/Set Copy 1 Drive ............... 41

Copy Data to Copy 2 Drive/Set Copy 2 Drive ............... 42

Copying the data of this unit to a video cassette .......... 43

Playback software ......................................................... 44

Information .................................................................... 46

Protect Data .................................................................. 47

PTZ Control ................................................................... 48

PTZ control using the menu .......................................... 48

PTZ control using the front panel buttons ..................... 48

Setup Menu

Recording ...................................................................... 49

Settings concerning normal recording and

alarm recording ............................................................. 49

Pre-alarm recording ................................................ 49

Set Recording Pattern A (Normal/Timer) to D (Timer) .. 49

Alarm Input .............................................................. 51

Emergency Recording Setup ........................................ 52

Emergency recording .............................................. 52

Long pre-alarm recording ........................................ 53

Audio Recording Setup ................................................. 53

Timer .............................................................................. 54

Timer ............................................................................. 54

Overlapped timer settings ....................................... 55

Motion Det ..................................................................... 56

Set Motion Detection Pattern A/Set Motion Detection

Pattern B ....................................................................... 56

System ........................................................................... 58

Time/Date Setting ......................................................... 58

Menu Language Selection ............................................ 58

Rear Terminal Setting ...................................................58

Mode Out Settings .................................................. 58

Call Out Settings ..................................................... 59

Key Sound .............................................................. 59

Buzzer ..................................................................... 59

Password Setting .......................................................... 60

SIMPLE LOCK ........................................................ 60

Activating the simple lock .................................. 60

Releasing the simple lock .................................. 60

PASSWORD LOCK ................................................ 60

Using “Operation control” of PASSWORD LOCK

(level 1 to 3) ....................................................... 60

Registering the PASSWORD .................................. 60

Activating the PASSWORD LOCK .......................... 61

Releasing the PASSWORD LOCK ......................... 61

Changing the PASSWORD ..................................... 61

Changing the lock mode from PASSWORD LOCK

to SIMPLE LOCK .................................................... 61

Multiplexer function related button operations/

operation table .............................................................. 62

Camera number button operations ......................... 62

SPLIT buttons operations ....................................... 62

SEQUENCE button operations ............................... 62

DIGITAL ZOOM button operations .......................... 62

The function of the SPLIT, SEQUENCE, DIGITAL

ZOOM, and camera number buttons ...................... 63

Multiplexer Setting ........................................................ 64

Output A Settings .................................................... 64

Output B Settings .................................................... 65

Alarm Display Setting .............................................. 66

Covert Camera Setting ........................................... 66

On Screen Display Setting ............................................ 67

On Screen Information ............................................ 67

Camera Title ............................................................ 67

Recorder Title .......................................................... 68

Monitor Output Adjust ............................................. 68

Reset to Factory Setting ............................................... 68

Menu Data ..................................................................... 69

Load Menu Data ........................................................... 69

Save Menu Data ........................................................... 69

System Menu

COM/LAN ....................................................................... 70

RS-232C Setting ........................................................... 70

RS-485 Setting ............................................................. 70

LAN (Communication) Setting ...................................... 71

PTZ Setting .................................................................... 72

PTZ Camera Conﬁ guration ........................................... 72

Conﬁ guration Check List ............................................... 72

Service Info ................................................................... 73

System Log List ............................................................ 73

Elapsed Operating Time ............................................... 73

Disk Information ............................................................ 73

Restore .......................................................................... 74

Restore Data to Main HDD from Drive 1/2/

Export Drive 1/2 Conﬁ guration ...................................... 74

Memory .......................................................................... 75

Add/Remove HDD Device ............................................ 75

Notes for using the external device ......................... 76

Attaching the HDD and setting the ID number ........ 76

The order of recording/playback when internal and

external HDDs are registered as the main device .. 76

Add/Remove DVD/CD Drive ......................................... 76

Data Management Setting for Main Memory ................ 77

Recording Data Readout Setting .................................. 78

Data Clear ...................................................................... 79

Main Storage Memory .................................................. 79

Copy 1/Copy 2 .............................................................. 79

Other convenient functions ......................................... 80

Various playback functions ........................................... 80

Playing still frames .................................................. 80

Shuttle viewing/direct shuttle viewing ..................... 80

Shuttle hold ............................................................. 80

Frame-by-frame playback ....................................... 80

Reverse playback ................................................... 80

High-speed fast-forward/high-speed rewind ........... 80

Changing playback intervals ................................... 81

Simultaneous playback during recording ................ 81

Playback the latest recorded contents .................... 81

Triplex playback ...................................................... 81

Registering the picture .................................................. 82

Registering a bookmark .......................................... 82

Picture copy ............................................................ 82

Functions of the unit in case of power failure ............... 83

Power failure compensation circuit ......................... 83

Power failure reset recording .................................. 83

Log function when power failure occurs while the unit

is in operation or the MAIN switch on the rear of the

unit is turned OFF ................................................... 83

RESET button ............................................................... 83

Operation examples ..................................................... 84

Operation example 1 .................................................... 84

Operation example 2 .................................................... 85

Operation example 3 .................................................... 86

Operation example 4 .................................................... 88

Basic operations .......................................................... 90

Basic multiplexer functions ........................................... 90

Multiplexer buttons .................................................. 90

Basic manual recording ................................................ 91

Setting the recording rate and picture grade for normal

recording ................................................................. 91

Basic playback .............................................................. 92

Basic search ................................................................. 93

Search by Time and Date ....................................... 93

Search by Alarm List ............................................... 94

Communications by Web Browser ............................. 95

Communications by Web Browser ................................ 95

The personal computer product requirements ........ 95

Connections ............................................................ 95

Main Menu .................................................................... 96

Live Monitoring ........................................................ 97

Playback ................................................................. 98

Time Search ...................................................... 98

Alarm List Search .............................................. 99

Image Search .................................................... 99

Conﬁ guration Menu ................................................. 99

User Registration ............................................. 100

Recorder Title & Camera Titles ....................... 101

E-mail Setup .................................................... 102

Access Mode Setup ........................................ 103

Clock Setup ..................................................... 103

Logout ................................................................... 104

Change Login User ............................................... 104

Recording time table .................................................. 105

Continuous recording time table ................................. 105

Troubleshooting ......................................................... 106

Warnings and CALL OUT output ............................... 108

Warnings and their appropriate countermeasures ...... 108

Check sheet .................................................................110

Glossary ...................................................................... 126

Relation of recording operation to the number of

cameras and recording rate settings .......................... 126

Speciﬁ cations ............................................................. 127

How to read this manual

Viewing displays

(Refer to this information when operating):

Reference information concerning operation

(Caution required):

Cautionary items concerning operation

(See reference page):

Reference item and page number

Finding desired information

There is a “Contents” at the beginning of this manual. In addition, reference pages are indicated throughout this manual.

Troubleshooting

Read Troubleshooting (pages 106,107) for possible remedies to the problem.

Menu settings

See Check list (pages 110-125) for available setting parameters for each menu.

Beginning

Flowchart

Flowchart for connection and settings

This is a ﬂ owchart of connection and settings for making an alarm recording with timer recording and then search, playback, and copy the recorded data.

Connections

• Connections for camera, monitor, and sensor.

See “ Connecting to CCTV camera, monitor,

and sensor” on page 18.

• Connection for the alarm recording.

See “ Alarm recording connection” on page

19 and “

Rear view” on page 16.

Boot-up the unit

When not executing Setup Wizard:

See “ Setup Wizard” on page 26.

Only when the unit is turned on for the ﬁ rst time, the <Setup Wizard> screen is displayed automatically. It is not displayed next time.

• Set the present time and HDD settings in each menu manually. (“ the present time. “ Main Memory” on page 77. Set the alarm area.)

Recording

Time/Date Setting” on page 58. Set

Data Management Setting for

Connections

• Connections for camera, monitor, and sensor.

See “ Connecting to CCTV camera, monitor,

and sensor” on page 18.

• Connection for the alarm recording.

See “ Alarm recording connection” on page

19 and “

Rear view” on page 16.

Boot-up the unit

When executing Setup Wizard:

See “ Setup Wizard” on page 26.

Only when the unit is turned on for the ﬁ rst time, the <Setup Wizard> screen is displayed automatically. It is not displayed next time.

• The language, present time, HDD conﬁ guration, and recording settings are set automatically by following the instructions in the menu.

Making the initial menu settings

• Setting the present time display mode.

See “ On Screen Information” on page 67.

• Setting the audio recording.

See “ Audio Recording Setup” on page 53

and “

Continuous recording time table” on page

105.

Making the HDD settings

• Setting the repeat recording.

See “ Data Management Setting for Main

Memory” on page 77.

• Setting the remaining HDD capacity.

See “Low Memory Alarm Setting” on page 58.

• Setting the CALL OUT.

See “ Call Out Settings” on page 59.

• Setting the buzzer.

See “ Buzzer” on page 59.

Making the multiplexer settings

• Making the split screen settings.

See “ Multiplexer Setting” on page 64.

• Making the sequence setting.

See “ Multiplexer Setting” on page 64.

Setting other various functions

• Setting the camera title/recorder title.

See “ Camera Title” and “ Recorder Title”

on pages 67, 68.

• Setting the display mode.

See “ On Screen Information” on page 67.

• Setting the output signal of the unit status.

See “ Mode Out Settings” on page 58.

Setting the motion detection

• Selecting the camera number.

• Setting the detection areas.

• Setting the sensitivity.

• Setting the minimum number of dots for starting the motion detection operation.

• Setting the detection interval.

See “Motion Det” on page 56.

Setting the timer recording

• Setting the normal/alarm recording or pre-alarm recording.

Setting the recording rate/picture grade for

•

normal recording. Setting the recording rate/picture grade for alarm

•

recording. Setting the motion detection recording.

•

Selecting the camera selection during the alarm

•

recording and trigger for alarm recording. Setting the alarm recording time.

•

Setting the pre-alarm recording time.

•

Setting the PTZ camera preset.

•

See “ Set Recording Pattern A

(Normal/Timer) to D (Timer)” on page 49.

• Setting the timer program.

Setting the holiday.

•

Selecting the timer program number.

•

Making the timer recording settings.

•

Selecting the day of the week.

•

Selecting the start time.

•

Selecting the end time.

•

Selecting the program mode.

•

Selecting the motion detection mode.

•

(

Selecting the special day of the week.)

•

See “Timer” on page 54.

The search is completed and the search result is displayed

Playback the search result

• Selecting the camera number to be played back.

See “ Multiplexer Setting” on page 64.

• Selecting the split/sequence screen.

See “ Multiplexer Setting” on page 64.

• Playback the recorded data.

See “ Basic playback” on page 92.

• Selecting the playback speed.

See “ Various playback functions” on page

80.

Copy the data

• Setting the copy device.

See “ Add/Remove HDD Device” or “ Add/ Remove DVD/CD Drive” on pages 75, 76.

• Setting the copy function.

See “ Copy Data to Copy 1 Drive” or “ Copy Data to Copy 2 Drive” on pages 41, 42.

Timer recording is executed and completed

See “ Warnings and their appropriate

countermeasures” on page 108.

Searching the recorded data

• Setting the device to be searched.

See “ Select Source Device” on page 39.

• Setting the alarm list search.

See “ Search by Alarm List” on page 94.

Beginning

Major operations and their functions

Front view

1 3 4 5 6 7 8 9 10 11 12

1. POWER indicator

Illuminates when the unit is ON (MAIN switch on the rear is ON and the POWER button in the front has been pressed.) Turns off when the unit is in stand by mode (only rear switch is ON) or MAIN switch on the rear is turned off. It takes about 1 or 2 minutes from pressing the POWER button to switch the unit ON. When the unit is in operational transition such as boot-up, the indicator ﬂ ashes and other operations are not accepted.

2. REMOTE jack

Input connector for optional wired remote controller.

19 20

151413 162

9. PRE ALARM indicator

Illuminates during pre-alarm recording. It also illuminates when pre-alarm recording has been set.

10. COPY 1 indicator

Illuminates while performing copy 1 operation. Flashes when starting or ending the copy 1 operation.

11. COPY 2 indicator

Illuminates while performing copy 2 operation. Flashes when starting or ending the copy 2 operation.

3. ACCESS indicator

Illuminates during accessing to internal HDD or peripheral recording devices. Press the POWER button after the ACCESS indicator is turned off and “POWER OFF” is displayed on the LCD display.

4. COM (COMMUNICATION) indicator

Illuminates when establishing the communication with personal computer.

5. ALARM indicator

Illuminates during alarm recording.

6. TIMER indicator

Illuminates during timer recording or timer recording stand-by mode.

7. LOCK indicator

Illuminates while simple lock or password lock is turned on.

8. M-DET indicator

Illuminates when the motion detection function is activated. Flashes during motion detection recording.

12. REC/STOP button

Starts recording. The button lights up during recording. When pressing the button for more than 2 seconds, the recording stops and the light turns off. When pressing this button for more than 2 seconds during alarm recording, recording stops. During timer recording, recording does not stop even if the button is pressed.

13. SPLIT screen buttons (

Selects split screen to be displayed.

,,,,

)

A to E buttons

Used for the menu settings.

14. SEQUENCE button

Used to select and display the sequential screens.

TILT button

When pressing the button during PTZ mode, the angle of the camera adjusts in the upward direction.

15. PTZ (Pan, tilt, and zoom) button

Switches this unit to PTZ mode to control the PTZ camera connected.

Camera control buttons

The following buttons control PTZ motion during PTZ mode. This unit must be in single screen display.

CAMERA ZOOM button

Adjusts the camera zoom. Press this button and then turn JOG to the left (wide) or right (tele) to adjust the camera zoom.

FOCUS button

Adjusts the focus of a camera. Press this button and then turn JOG to the left (far) or right (near) to adjust the focus.

IRIS button

Adjusts the iris of a camera. Press this button and then turn JOG to the left (close) or right (open) to adjust the iris.

PRESET button

Presets up to 16 viewing positions. Press this button and then press the camera number button within 3 seconds to preset the points.

AUTO PAN button

Activates auto pan of the camera connected.

21. Camera number buttons (1 to 16)

Displays the picture supplied from the camera connected. The number of the button corresponds to that of the CAMERA IN connector on the rear panel. The button of the displayed camera number lights up. Used for the preset function of the PTZ camera control. Used for the menu settings.

M-DET DOT ON/OFF/M-DET AREA SET UP (camera number 9 and 13)

Used for setting the detection area of the motion detection function.

16. OUTPUT A/B button

Switches the multiplexer output between A and B. The light turns off when OUTPUT A is selected and on when OUTPUT B is selected. It affects both, playback and search functions. The menu cannot be displayed when this button is illuminated.

TILT button

When pressing the button during PTZ mode, the angle of the camera adjusts to the downward direction.

17. Disc loading slot

Accepts DVD disc or CD to copy/back up. The supported discs are: DVD-RW, DVD-R, CD-R, and CD-RW

OPEN/CLOSE button

Opens or closes the disc loading slot.

BUSY indicator

Flashes or illuminates during recording or playback.

18. LCD display

Displays the present time and the status of the unit.

19. SHUTTLE ring

Adjusts the playback speed, and rewinds or forwards the recorded pictures. Pans the camera.

20. JOG dial

Forwards or rewinds the picture during playback (frameby-frame). Uses for controlling PTZ cameras connected.

Beginning

Major operations and their functions (continued)

Front view (inside of the door)

25 26

22 24 29 30

22. POWER button

Turns on the unit (MAIN switch on the rear of this unit must be ON). When the button is pressed again, the unit switches to stand-by mode. The POWER and other button operations are not accepted while the POWER indicator is ﬂ ashing.

3323

29. LOCK button

Activates simple lock or password lock when pressing while the MAIN switch (main power) on the rear panel is turned on and lights up the LOCK indicator. Moreover, the password can be set on the <Password Setting> (

page 60).

23. ANALOGUE OUTPUT connectors

VIDEO OUT connector

Output connector for video signal (RCA pin).

AUDIO OUT connector

Output connector for audio signal (RCA pin).

24. SERIAL BUS port

Input and output port for the devices equipped with SERIAL BUS connectors. Bus power cannot be used.

25. HELP button

Displays the help menu (for caution on use, operating method, and explanation on functions). Used when the warning message is displayed. This button can be used even while the menu screen is displayed.

26. SET UP button

Displays the <User Menu>.

27. SEARCH button

Displays the <User Menu> with search menu opened.

28. TIMER button

Sets the unit to timer recording/stand-by mode and lights up the TIMER indicator. When pressing this button for more than 2 seconds, timer recording/stand-by mode is cancelled and the TIMER indicator is turned off.

30. TRIPLEX PB button

In split screen display, inserts the playback picture of needed camera while also displaying the live picture from other camera.

31. BOOK MARK button

When pressing this button during frame still playback of the single screen display, the selection screen appears to register the bookmark or to copy the picture being displayed.

32. DIGITAL ZOOM button

Pressing this button in single screen display displays the screen in 100 % magniﬁ cation (live or playback). Press- ing the camera number button (11, 14, 15, or 16) moves the magniﬁ cation centre point.

33. Operation buttons

STOP button

Stops playback.

PAUSE/JUMP TO END button

Switches the playback to still frame playback when pressing this button during playback. Resumes playback when pressing the button again. The button lights up during still frame playback. When pressed during shuttle playback, the set playback speed is maintained even when letting go of the SHUTTLE ring. (Shuttle hold) When pressed during the unit is in stop mode of playback, the frame still picture around the end point of the latest recording appears. (Jump to end)

REV. PLAY (REVERSE PLAY) button

Starts reverse playback. The button lights up during reverse playback.

PLAY button

Starts playback. The button lights up during playback.

SPEED (+ and –) button

Switches the playback interval speed during normal or reverse playback.

Loading/Ejecting a DVD or CD

Before using a disc, read the cautionary notes described

in the manual included with the disc.

step

1. Press the OPEN/CLOSE button.

• The disc loading slot opens.

[When loading the disc:]

step

2-1. Place the disc onto the tray.

• Make sure that the disc is inserted properly with the label side up.

[When ejecting the disc:]

step

2-2. Eject the disc from the tray.

step

3. Press the OPEN/CLOSE button again.

• The disc loading slot closes.

Do not eject the disc while copying/restoring, saving/load-

ing menus, or immediately after inserting the disc. The disc or the contained data may be damaged.

Use the disc which we recommend. When a disc other

than the recommended is used, the data may not be read or written correctly. Consult your dealer for recommended usable discs.

When using DVD-RW or CD-RW disc, initialize the disc

by <Data Clear> (

Although you can copy the data on DVD/CD with this unit

and playback that data on the personal computer using the supplied application software, not all the personal computers or DVD/CD drives are ensured for proper playback of such data.

Before using the DVD drive, check whether that the drive

supports the medium to be used. It is recommended to use the DVD-Multi drive when you playback the data on the personal computer.

page 79) before using.

Beginning

Major operations and their functions (continued)

Rear view

1. MAIN switch

This is the main power switch. To use this unit, set this switch to ON. Otherwise, the front power button does not turn the unit on/off.

2. AC power socket

Used to connect the power cord. Earth terminal is used for safety. Use the 100 to 240 V outlet with ground terminal.

This unit must be earthed at all times. Do not connect

this unit to a power outlet which does not have an earth terminal.

Use the supplied AC power cord.

3. CAMERA connectors

Do not connect superimposed voltage camera because

it can cause damage to the unit.

CAMERA IN connectors

Input connector for video signal of camera (BNC connector).

CAMERA OUT connectors

Output connector for video signal of camera (BNC connector). If the MAIN switch is turned on, the signal from CAMERA IN connector is looped out to this connector.

4. ALARM IN terminals

Input terminals for alarm signal. Alarm signal input is acceptable once a second. However, when multiple signals are input at the same time, not all the signals may be acceptable.

ALARM OUT terminals

Output terminals for alarm signal. This terminal outputs signal for about 2 seconds when alarm or motion detection is input to each sensor connected.

6 8 9 10 11 12 13 14 15

5. Keyhole for anti-theft lock

Used to connect a commercially available anti-theft cable manufactured by Kensington.

6. I/O terminals

CLOCK ADJ terminal

Input terminal to set the present time. Time display is adjusted to the nearest hour (00 minutes 00 seconds) when this terminal receives the signal.

The on-screen clock is reset to the nearest hour by applying a signal input of the CLOCK ADJ terminal. For

example, if the present time is 11:29:59, it is reset to 11:00:00, and if the present time is 11:30:00, it is reset to 12:00:00.

CLOCK ADJ OUT terminal

Output terminal to set the clock of the connected recorders to the nearest hour (00 minutes 00 seconds) in sync with input of CLOCK ADJ.

REC terminal

Input terminal to start recording. This terminal is not available during timer recording.

REC STOP terminal

Input terminal to stop recording. This terminal is not available during timer recording.

EMERGENCY terminal

Input terminal to start emergency recording immediately.

MODE OUT 1 to MODE OUT 4 terminals

Output terminal to inform the current mode of this unit. Select the mode of the unit to be output in the <Mode Out Settings> (

page 58).

CALL OUT + terminal/CALL OUT – terminal

This is an isolation output terminal. Information to be externally output consists of the selectable items which are output depending on the CALL OUT settings made in the <Call Out Settings> ( which are output regardless of the menu setting.

DC 12 V OUT terminal

Output the voltage only when both the MAIN switch and POWER button are turned ON. The maximum electric current is 350 mA.

page 59) and the ﬁ xed items

7. GND terminals

Used as common ground terminal.

8. PTZ control connectors

Connectors for connecting PTZ cameras to operate pan, tilt, and zoom functions of the camera.

9. RS485 connector

Connector for controlling this unit remotely via optional keyboard.

10. RS-232C connector

Used to connect to a host device equipped with RS232C connector (such as a personal computer). This unit can be controlled from other devices via this connector.

11. VIDEO OUTPUT connectors

OUTPUT A VIDEO connector

Output connector which sends video signal to the monitor (BNC connector).

OUTPUT A S(Y/C) connector

Output connector which sends brightness signals and colour signals separately for higher picture quality. Simultaneous output along with OUTPUT A VIDEO connector is also possible.

OUTPUT B VIDEO connector

Output connector which sends video signal to second (B) monitor (BNC connector) (

page 18).

12. SERIAL BUS port

Input and output port for connecting to the device equipped with SERIAL BUS connector. Do not use the power control function of the external device which uses bus power of this unit. Bus power cannot be used. The various external HDDs can be connected to this unit in order to expand the memory or to use as the copy device. However, during recording or playing back a picture at high rate, some pictures may be missed due to the slow rate of data transfer or the slow speed of response from the external device connected. Be sure to check the operation sufﬁ ciently in advance.

13. RESET button

Used to reset the unit and turn off the power. At that time, picture data, menu settings, and the present time are kept.

14. LAN port

Port for communication using web browser.

15. AUDIO connectors

AUDIO IN connector

Input connector for audio signal (RCA pin).

AUDIO OUT connector

Output connector for audio signal (RCA pin).

Beginning

Connections

Connecting to CCTV camera, monitor, and sensor

Dome camera

Camera #1

To CAMERA IN 1 connector

Up to 16 cameras

Clamp the power cord using the supplied cable clamping band in order to prevent the accidental removal of the cable. ( See page 20.)

To OUTPUT A VIDEO or OUTPUT A S(Y/C) connector

Clamp the USB cable using the supplied cable clamping band in order to prevent the accidental removal of the cable. ( See page 20.)

To VIDEO IN or S(Y/C) IN connector

One of either codes should be connected.

To VIDEO IN connector

To OUTPUT B connector

Monitor

To LAN

To ALARM IN terminal corresponding to the camera #.

Power code

Sensor #1

Processing the connecting line

Connection on the ALARM IN terminals, the I/O terminals, and RS485/RS422 Compatible power lines ø0.32 - ø0.65 mm (AWG 28 - 22)

Cut the designated area from the electric wire’s outer covering (vinyl portion).

To GND

terminal

PTZ control connectors

RS422 type

dome camera

RS232C type dome camera

(camera controller)

5-7mm

To SERIAL

BUS

External recording device

DX-ZD5UE(Z) Up to 7 units can be mounted at the same time.

Mouse

You can connect various devices to control this unit from them, or to control them from this unit. However, depending on

the operational condition of this unit, the operational speed of this unit may become slower or control of the external device may be delayed.

Alarm recording connection

The diagram below shows an example connection for setting alarm signal to sensor number 1.

Alarm switch

EMERGENCY/ALARM IN/REC/CLOCK ADJ input terminals

[Input Circuit]

10kΩ

Input terminal

GND

22kΩ

0.047µF

4.7kΩ

[Input condition] [Input interval] [Specification]

CALL OUT output terminal

[Output Circuit]

CALL OUT + terminal

CALL OUT - terminal

[Specification]

ALARM OUT/MODE OUT 1 to 4/CLOCK ADJ output terminals

[Output Circuit]

Output terminal

GND terminal

[Specification]

ground of 200 ms or more 1 second or more Active: When terminals are short-circuited or “Low” Level is applied. Non active: Open.

Warning signal (Photo coupler output) Active: Short Max. Drive current 7 mA DC. Non active: Open. Max. Voltage +24 V DC.

Active: “Low” Level Max. Drive current 30 mA DC. Non active: Open. Max. Voltage +24 V DC. * Be sure to use these terminals within above rated value.

Connections

Connections (continued)

Clamping the cables

step

1. Put the supplied cable clamping band into the

clamper hole on the rear panel.

• There are 2 clamper holes on the unit, for power cable and USB cable.

step

2. Put the cable to be clamped through the cable

clamping band as illustrated below.

• Face the serrated surface of the band inside.

step

3. Pull the edge of the cable clamping band until it

stops.

Connecting to an analogue video cassette recorder

To VIDEO OUT connector

To AUDIO OUT connector

Commercially available audio cable

Commercially available video cable

To AUDIO IN

connector

To VIDEO IN

connector

Analogue video cassette recorder

Optional items

DX-ZD5UE(Z)

HDD extension unit (serial bus connection type)

The various external HDDs can be connected to this unit in order to expand the memory or to use as the copy device. However, during recording or playing back a picture at high rate, some pictures may be missed due to the slow rate of data transfer or the slow speed of response from the external device connected. Be sure to check the operation sufﬁ ciently in advance.

Do not use the power control function of the external device which uses bus power of this unit.

DX-RM5(ZD)

Rack mount adapter for HDD extension unit DX-ZD5UE(Z).

DX-KB5UE

Keyboard for digital recorder

R-2500

Wired remote controller (Menu setting, search, and PTZ preset function are not available with wired remote controller.) Consult your dealer for the functions related to PTZ.

DX-RM4

Rack mount adapter for digital recorder DX-TL4716 series.

Mitsubishi DX-TL4716U INSTALLERʼS MANUAL

Specifications and Main Features

Frequently Asked Questions

User Manual