DX-TL1600U:
DIGITAL TIME-LAPSE RECORDER
Functions Available Only with Digital Recorder
Time date search, alarm list search,
skip search, index search
● A desired scene can be retrieved at high speed (not more than 0.7
sec). It is also possible to specify camera number.
Jog / shuttle
● Menu setting and retrieving of a desired scene can be easily and
quickly completed.
Slow, frame feeding, quick seeing,
still picture, special reproducing function
● An important scene can be securely verified.
Pre-alarm function
● Pictures can be initially recorded before the alarm sensor reacts.
Digital PCM recording
● Clear, high quality sound enhances overall performance.
Image-alteration recording function
● A proprietary image-alteration recognition method processes each
image recorded with this unit.
Password lock function
● Password lock function is included, preventing misoperation
and tampering.
mSPECIFICATIONS
Item Description
Main Recording Medium
External Recording Medium
Signal Compression System
Processed
Video Terminal Input
Sound Signal Recording System
Sound Terminal
Recording Interval
Timer Recording
120 GB fixed magnetic recording device (HDD)
Possible to maximum 320 GB (total) by externally
connecting disks
It is externally connected to I/O port (SCSI)
Extended recording HDD:Maximum 100 GB 3 2 units
Backup/copying : DDS-2, DDS-3, MO, ZIP,
DVD-RAM
NTSC systemSignal System
JPEG system : Sampling system 13.5 MHz
Compression unit : Field
6843240 pixels (5 picture grade)Number of Picture Elements
16-channel input BNC : 1.0Vp-p 75V
Monitor output BNC:1.0Vp-p 75V...2 systems
Output
S terminal : Y 1.0Vp-p 75V/C 0.286Vp-p 75V
16 channels through output BNC : 1.0Vp-p 75V
(output during AC power supply)
8-bit PCM recording Sampling : 12.8 kHz
Line input : 50KV(RCA pin) 308mV (rms)z
Input
Mic input : 600V(3.5 jack) 0.346mV (rms)
Line output : 1KV(RCA pin) 308mV (rms)
Output
More than 450 lines (superior, high mode)Horizontal Resolution
Can be set for each camera with function to estimate
recording possible time
Independent 8 programs, 3 patterns
Operation : Setting of days of the week (Monday Sunday, every day, specified days of the week)
Camera operation 3 patterns, basic recording
interval, backup, skip, power
m
Recording Time Table
Approximate recording time (when recorded in 120 GB hard disk
incorporated) is displayed. This recording time table is when “1” is
selected as priority of “camera operation setting” for all the cameras.
When the motion detector is on, the recording intervals of 30, 10, 6
(frames/sec) cannot be used.
Picture Grade
30 Fields/sec.*1
15 Fields/sec.
10 Fields/sec.
Recording time *2
With 1 camera
Number of pictures
*1 Not possible to select in case motion detection mode active.
*2 With audio recording mode will be decreased approximately 25% of total recording time.
(Marked area does not support audio recording.)
7.5 Fields/sec.
6.0 Fields/sec.
5.0 Fields/sec.
3 Fields/sec.
1 Fields/sec.
*1
*1
SUPERIOR
1D
2D
3D
4D
5D
6D
10D
30D
2628K
HIGH
1D 14H
3D
4D 12H
6D
7D
9D
15D
47D
4114K
MEDIUM
2D 5H
4D
6D 12H
8D 12H
11D
13D
22D
67D
5829K
D:Days H:Hours
STANDARD
2D 22H
5D 12H
8D
11D
14D
17D
29D
88D
7658K
BASIC
3D 12H
7D
11D
14D
18D
22D
37D
111D
9601K
Item Description
Alarm Recording
Pre-alarm Recording
Power Failure Recovery Recording
Motion Detection Function
Retrieval
I/O Terminal
Multiplexer Function
Remote Access Interface
Guarantee at Power Failure
Recording time : 2sec,5sec,10 sec,15sec,
30sec,45sec,1min,2 min,5 min,10min,contact input
Pre-alarm time is adjusted in 3 stages, long, middle,
and short
Auto-start of unit after power failure
Displays percentage of hard disk space usedUse Capacity Display
EnglishMenu Display
For each camera (detection area setting, detection
sensitivity setting, recording start dot number setting)
Recording interval : Maximum 15 frames
Time adjusting input (back terminal)Timer Adjusting Function
Time date search, index search, skip search, alarm
list search
External device connecting terminal (SCSI-2/half
pitch 50 pins)
Division display: 4, 9, 16 divisions
Sequential display: possible with 1/4 /9 screen
RS-232C (D-SUB 9 pins),10 base-T Ethernet (RJ-45)
Note: Interfaces do not work simultaneously
AC100-240V 50/60HzPower Supply
1A (approx. 60 W), rated input 1.0 - 0.5A (100-240V)Power Consumption
31 days (when vanadium/lithium secondary battery
is fully charged)
41∞F - 1048F (5∞C ~ 408C) (max. 80%)Relative Humidity
16.7 x 15.0 x 4.4" (425 x 380 x 113 mm)Dimensions (W x D x H)
18.9 lbs. (8.6 kg)Weight
Two-year parts and laborWarranty
©2001 Mitsubishi Digital Electronics America, Inc. Standard features, options and specifications subject to change without notice. All trademarks or registered trademarks are the property of their respective holders.
Printed on 50% recycled paper including 20% post-consumer fibers, processed chlorine free. Printed with vegetable based inks.
Mitsubishi Digital Electronics America, Inc.
Imaging Products Division
9351 Jeronimo Road
Irvine, CA 92618
Toll Free: 888-307-0309
www.mitsubishi-imaging.com
Technical Support:
Toll Free: 888-307-0309
Email: tsupport@mdea.mea.com
Canada:
Mitsubishi Electric Sales Canada Inc.
Information Technologies Group
Markham, Ontario
905-475-7728
IG1022-04/01-10M-LITDXTL1600