Mitsubishi Electric D90-WIFI-1 User Manual

Download

SELFONE WIRELESS PRINT STATION

D90-WIFI-1

USER GUIDE VER 1.5

MODEL

CONTENTS

Assembly/Parts List

Workﬂow

Wi-Fi Setup

Android iOS

Fun Print Service Easy Print Service

EasyPrint1 EasyPrint2

Administrator sengs

Menu Structure Log in Start Menu

Seng Access

Frame/Layout Setup Wizard

TOP Menu

1. Print Info

2. Printer Info

3. System Info

Stasc Applicaon Info

Error Info

Seng Menus

4. HotFolder Seng

5. Print Seng

6. Service Seng

6.1 Web Print Seng

Easy Print 1, Easy Print 2 Fun Print>

6.2 Print Limit Seng

6.3 Layout Seng (for Fun Print)

6.4. Screen Seng

7. System Seng

Internal Wi-Fi Client mode Bridge Mode

External Wi-Fi (USB) AP mode External Wi-Fi (USB) Client mode External Wi-Fi (LAN) AP mode External Wi-Fi (LAN) Client mode

8. Addional Seng

9. Maintenance

Fun Print Layout seng - Layout posion - size chart Frame image details for Fun Print (Underlaid frame) HotFolder seng Layout posion - size chart

Frame image details for Easy Print and Overlayed frame for FunPrint

Wi-ﬁ Print System Soware Update Procedure List of Print Media vs. Print Sizes Frequently Asked Quesons (FAQ) Troubleshoong

3 4 5

17 17 17 18

19 20 22 23

30 30 31 33 34 35 36 37 38 39

Contents Qty. Descripon

NUC

1 Ft. USB Cable

Power Adapter

Metal Plate

Black Screws

Silver Screws

Washer

Installaon Set-up Guide

Manual

Wireless device

Connecon to D90 printer

Connecon to power

Aaches to the NUC

Screw hooks to for the NUC

Screws for metal plate

Washers for metal plate

QRef Manual

Intel Manual

Metal Plate

Silver

Screws

Washers

Power Adapter

Power

Buon

USB connecon

Type A

USB connecon

Type B

Back Screws

NUC

Warning:

Do not unplug the power of the NUC without shung

down the system.

Do not uplug USB cable from the NUC to the printer w/o properly shung down the system.

Proper shutdown; press the NUC's power buon

or perform a shutdown from the web program thru the admin user.

ASSEMBLY / PARTS LIST

How to aach your CP-D90DW Printer to

the NUC

1. Aach metal plate to the back of the D90 printer using (2) silver screws. (Note: Make sure to point arrow up on metal plate)

2. Aach black screw to the back of the NUC.

3. Insert NUC with aached screws to the metal plate on the back of the D90 printer.

4. Connect USB Cable to the D90 printer and power

adapter to the NUC.

5. Plug NUC to an outlet and press power buon on

the NUC.

*Make sure D90 Printer power is on before

powering up the

NUC. ame and use new admin/user password

Wi-Fi Setup

Connect Smart Phone/Tablet to the Selfone Wireless Print Station

application.

Parts List

Simple Setup Workflow

FunPrint basic setup workflow is as follows;

1) Wi-Fi connection to the PC box from a mobile device.

4) Log in as Admin

5) Tap "Stop Service" button.

6) Tap "Frame/Layout Setup", and "2. FunPrint Layout

7) Follow Layout Setting Setup steps 1/7 - 7/7

8) Close setting screens and go back to "Start" screen

2) Start Application

3) Move to Setup Log in screen

Select SSID for the PC Box at Wi-fi setup menu of your mobile device

Tap "Start Application" button.

For Android, manually open Chrome browser. For iOS10.3.x, manually open Safari.

Go to http://192.168.110.1/maintenance/

Default password is

" admin "

9) Tap "Start Service" button

After Starting service, put "a.jp" (as an example) in the URL windows of a browser to redirect to FunPrint service screen.

OPERATION Wi-Fi SETUP

Ver1.5

Wi-Fi Setup

1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX

1) If Notification area shows Wi-Fi connection, Swipe down to access the notification area at top of screen.

2) Touch "Sign into Wi-Fi network"

2. Open Android browser (Chrome is recommended) and start application. *If a web page is not automatically redirected, type "a.jp" at URL window.

3. The application starts on a browser.

[Note] Depending on a device, the above screen No.2 and /or Notification 1),2) does not appear.

OPERATION Wi-Fi SETUP

Ver1.5

1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX

2. Welcome screen automatically pops up. Tap "Start application"

3. The application starts automatically on Safari browser.

1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX

2. Welcome screen automatically pops up. Tap "Start application"

3. Tap "Done" at the top right to close this

screen.

OPERATION Wi-Fi SETUP

Ver1.5

<iOS 11-11.1> (continued)

4. The application starts automatically on Safari browser.

1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX

2. Welcome screen automatically pops up. Tap "Start application"

3. Close the window by tapping

Done button.

4. Manually open Safari

browser to start the service. *If a web page is not automatically redirected, type "a.jp" at URL window.

Then, tap "Yes, I Agree to Terms and Conditions" at the bottom.

OPERATION FUN PRINT SERVICE

Ver1.5

Fun Print Service

Fun Print allows selection of up to 6 images from your mobile device and place them in a pre-format template. Can preview and edit each image before printing. The feature and functions are:

• Customized screen colors with a capability of showing any shop or campaign logo

• Easy Layout/Frame setting wizard

• Configurable up to 6 images per print

• Users can edit each image (size, angle, position and add decoration icons)

• Overlaid frame can be set ( Import the frame image from Easy print setup menu)

• Copies are selectable by end-users

• End-users can preview image(s) before sending it for printing

1. Choose a template design (No. 1 - 6). Note: When only one template is activated, this screen won't appear.

2. Tap on the square to place the photo in that location.

3. Optional: To edit the photo, touch the photo and hold, to show the edit menu. *Adjust size, position and angle or re-select image (center icon).

4. Optional: click Stamp to show Select Stamp screen. Choose a stamp and select a stamp size. Touch image to stamp.

OPERATION FUN PRINT SERVICE

Ver1.5

5. "Print Confirmed" screen will come up.

6. Set number of copies.

7. Tap "Print". Image will be uploaded to the system.

8. "Print Complete" screen with Print number and SSID of the system will come up.

OPERATION

EASY PRINT SERVICE

Ver1.5

Easy Print Service

Easy Print 1

Easy Print provides a quick and easy way of printing stored images from mobile phones and tablets (iOS and Android). This service feature and functions are:

• Quick print service

• One image per print

• Users can select an image from their photo library or take a photo and send it directly for

printing thru Wi-Fi connection

1. Press "Yes, I Agree to Terms and Conditions".

2. Take photo or pick an image from Photo Library.

3. The image will be immediately uploaded to the system. Printing will begin shortly.

4. "Complete" screen with Print number and SSID of the system will come up.

OPERATION

EASY PRINT SERVICE

Ver1.5

Easy Print 2

1. Press "Yes, I Agree to Terms and Conditions".

2. Take photo or pick an image from Photo Library.

3. "Print Confirm" screen will come up. Press "Back" to re-select photo.

4. Press "Print" to up load image immediately. Printing will begin shortly.

5. "Complete" screen with Print number and SSID of the system will come up.

SETTINGS

Ver1.5

Administrator Settings

Menu structure

(Not Available)

10.1 FunPrint Frame Import

10.2 FunPrint Layout setting

6-3.Layout Setting

6-4. Screen Setting

Shutdown

Frame/Layout Setup

7. System Setting

8. Additional Setting

9. Maintenance

Start Service

Stop Service

Top Menu

1. Print Info

2. Printer Info

3. System Info

5. Print Setting

6. Service Setting

6.2 Print Limit Setting

Reboot

6-1. Web Print

3-1. Statistics

3-2. Application Info

3-3. Error Info

4. HotFolder Setting

4-1 ID 101, 102..206

Access the setting menu at following URL; http://192.168.110.1/maintenance/

Defaults ;

ID : Admin

PW : Admin

ID : user PW: user

Items highlighted by Yellow are functions that "User "privilege can NOT access.

SETTINGS

Ver1.5

Start menu

Setting Access

Unique hardware number

System version number

Ready : Print service is active Stopped: Print service is stopped Error: Error occurs in application or a printer , or a printer is not connected.

Currently available service

Hotfolder and Print Size information is available for EasyPrint only.

D90 print mode : available for EasyPrint only

D90 print finish : available for EasyPrint only

Settings that are greyed out cannot be accessed when the print service is active.

SETTINGS

Ver1.5

To access Settings, tap Stop service on the start screen and select OK. Go to Top Menu to access settings or Frame/Layout Setup for easy setup wizard for Funprint.

All setting menu

FunPrint Setup Wizard

When Error occurs, eg. during auto archiving, Error dialog in red is shown. Tap the dialog to see Error details.

SETTINGS - SETUP WIZARD

Ver1.5

Frame/Layout Setup Wizard

1. FunPrint Frame Import

2. Funprint Layout Setting

Import: Store frame image(s) - png format in the following directory in the USB:

Fun Print:

/(USB)/Smartp/funprint/frame/

Follow steps to setup FunPrint settings.

1/7 Max. 6 different frame/layout designs can be set. Tap a layout to modify.

Set Enable at lest 1 layout.

2/7

1) Customize Layout Name - max 15letter .

2) Select Print Size from drop down menu.

3/7

1) Select Layout type from drop down menu.

2) Enable or disable Auto Rotate.

SETTINGS - SETUP WIZARD

Ver1.5

4/7 Select a thumbnail of Frame Design.

5/7 When Caption option is set Enable, Caption setting screen appears.

1) Select type of caption. When selecting "Free", input a free caption or a function name. When Index number is used for a caption, set the start number.

2) Set Font, Color and layout of the caption

6/7 Adjust Caption position by arrow buttons.

A part of caption may be cut off if set at too close to top / bottom end.

7/7 Setup summary is shown Tap Finish or back to change setting.

Refer to

4. HotFolder Setting for available function names.

SETTINGS - INFO

Ver1.5

TOP Menu

1. Print Info

2. Printer Info

102000003

Print Number will be shown on a user's device. You can input the order number and search.

Select Validate to print photo or Reprint.

Printer Info

Connected printer information

Print Info

Print data sent from mobile devices are shown.

System Info

- Statistics

- Application info

- Error Info

Printer status

Media size

Media remaining count

[Note] When "Auto Delete" at System setting is enabled, Print Info will disappear after printing is completed.

[Note] "Validate" for a pending print job is effective when "Validation" at Hotfolder setting is enabled.

"Reprint is effective for a print job of which Status is shown as "Completed".

[Note] In case of 13x18(5x7"), 15x20(6x8") and 15x23(6x9") media, twice the number of remaining ink sheet is displayed.

SETTINGS - INFO

Ver1.5

3. System Info

Statistics

Tap Show to display statistics data.

Insert a USB flash drive to the USB slot and tap Save for exporting statistics data in csv format.

Application Info

Error Info

Insert a USB flash drive to the USB slot and tap Save for exporting Error info.

2 tyeps of statistics data will be stored in the following folder. (USB)/(System ID)/

OrderList_YYYYMMDD_yyyy mmdd.csv OrderTotal_YYYYMMDD_yyyy mmdd.csv

YYYYMMDD: "from" Date yyyymmdd: "to" Date

SETTINGS

Ver1.5

Setting Menus

4. HotFolder Setting

5. Print Setting

6. Service Setting

7. System Setting

8. Additional Setting

9. Maintenance

ID 101 - 120 : Easy Print settings (Print quality/finish/size, copies, Layout, Overlaid Frame, Text, validation, etc.)

ID 201 - 206 : Fun Print settings (Print quality/finish, Overlaid Frame, validation)

Gamma, Color, Sharpness setting for each Print Mode (Auto, Ultrafine, fine)

6-1. Web Print Setting

6-2. Print Limit Setting

Easy Print1, Easy Print2 :

HotFolder selection, Import Frame

Fun Print :

6-3. Layout Setting 4-4. Screen Setting Import Frame

Print Limit ON/OFF Max / Expiration time settings

admin, user ID, password

Wi-Fi Settings

SSID, password, Channel External Wi-Fi (USB, LAN)) Valid Domain, Bridge Mode Auto Start, Auto Delete, Auto Archive Language, Date &Time

Export Photo data (Original/Finished Photo)

Service Reset Clear

(Print Limit, Print Limit User)

Export / Import Settings (Service / Service&System)

Future option

(Not available)

SETTINGS

Ver1.5

4. HotFolder Setting

HotFolders ID 101 - 120 are used for Easy Print Service 1 &2.

To choose a HotFolder for Easy Print, go to: Service Setting > Web Print Setting

HotFolders ID 201 - 206 are used for Fun Print Service.

Select a Preset Print Size from drop down menu. i.e. 10x15(4x6”)

Choose a Preset Layout from drop down menu.

i.e. 10x15_Type2 *Make sure to select the same layout size specified in Print Size Layout:

i.e.10x15_Type2

Refer to Easy Print Layout and Frame Chart for more Details

When "Variable" is selected for Layout, positions (x,y) and size (W,H) of image can be set.

None, Frame select or Frame Rotation

When Frame select is chosen, available frames are listed in the drop down menu.

When Frame Rotation is chosen, Rotation Edit menu appears here.

Different frames will appear according to the number of times it is set to appear in the Freq (frequency) setting.

Be sure to Set to save settings.

SETTINGS

Ver1.5

Text > Edit

Add text or a function name:

{S_DATE} Photo shooting date {S_TIME} Photo shooting time {P_DATE} Print date {P_TIME} Print time {INDEX} Index number {N_ORDER} Photo number

x, y: Text position in pixel

W,H: Text box size

Font size will vary depending on the text box size

[Note]

{S_DATE}, {S_TIME} are not

available for HEIF formatted

image

SETTINGS

Ver1.5

5. Print Setting

Auto resume after recovery from an error state.

Print mode for each service must be set in

HotFolder Setting menu > Quality.

Auto Fine

UltraFine Image quality parameters can be set for each Print Mode. For example: Adjust sharpness settings for Fine mode and Auto mode.

Select Auto, UltraFine or Fine for setting parameters below.

Gamma+1.cpd, Gamma+2.cpd or Gamma+3.cpd are selectable to adjust brightness of image.

Level of Brightness by Gamma Table setting

None < Gamma+1.cpd < Gamma+2.cpd < Gamma+3.cpd

( Normal) (Brighter)

Be sure to Set to save settings.

SETTINGS

Ver1.5

6. Service Setting

6.1 Web Print Setting

Select Easy Print1 or Easy Print 2

Select a user defined HotFolder set by

4. HotFolder Setting

Import additional Frame(s) if available or Delete unnecessary Frame(s).

Select Easy Print1 or Easy Print 2

See 6-3. Layout Setting

(Note)

See 6-4. Screen Setting

Import additional Frame(s) if available or Delete unnecessary Frame(s).

(Note)

[Note] Layout Setting and Frame import are available at "Frame/Layout Setup" also.

Store following directory for FunPrint underlaid frame image. /(USB)/Smartp/funprint/frame/***.png

Easy Print uses an overlay frame on to a photo image with a transparent window. The window shape can be quadrangle, round or any shape.

Store following directory for Easy frame image: /(USB)/Smartp/easyprint/frame/***.png

Be sure to Set to save settings.

SETTINGS

Ver1.5

6.2 Print Limit Setting

System - Max Print Count Print service will stop when the total print reaches the setting value. i.e. If 1000 is set, the service stops when the number of prints reaches 1000.

User - Max Print Count Sets max print count & timer for the user. Each device is allowed to print until each total print reaches the setting value. Print limit is reset after expiration time has passed.

i.e. If 1 hour is set for Expiration Time, each mobile device can print up to 10 copies per hour. Another 10 copies on the next hour.

Max Print Count setting per system

Max Print Count setting per device

The above max count will be reset after the expiration time.

Underlaid

Overlayed

The basic fame for Fun Print is Underlaid of the image, and image shape is always quadrangle. Frame/Layout Setup wizard for FunPrint allows to use the underlaid frame only. However, if Hotfolder setting for #201- 206 is used, Overlay frame can be used for Fun Print also. The overlay frame can be a full size frame design with a transparent window for a photo image or overlay design like a logo or a character with a full size transparent canvas.

[Import] Overlayed frame for Fun Print must be imported from Service Setting - Easy Print1 or 2 - Frame Setting - Import

Store following directory for Overlayed frame image: /(USB)/Smartp/easyprint/frame/***.png

[Use of frame] HotFolder Setting - ID 201, 202.... 206, corresponding to

Layout number of Funprint from 1 to 6 - Frame - Frame select / Frame

[Note] The overlayed frame will not be displayed on Fun Print Service screen on user's mobile device, but added on a print.

SETTINGS

Ver1.5

6.3 Layout Setting (for Fun Print) - Advanced

Select a Preset Print Size from drop down menu. i.e. 10x15(4x6”)

Choose a Preset Layout from drop down menu.

i.e. 10x15_Type2 *Make sure to select the same layout size specified in Print Size Layout:

i.e.10x15_Type2

Refer to Fun Print Layout and Frame Chart for more Details

When Variable is chosen for Layout, number of image(s) - up to 6, positions (x,y) and size (W,H) for each image can be defined.

Available Frames are listed in the drop down menu.

For easy setting, use Frame/Layout Setup wizard from the Start menu.

Be sure to Set to save settings.

Customize Layout Name.

- max 15letter

SETTINGS

Ver1.5

6.4. Screen Setting (for Fun Print and Welcome screen )

Customization of color for the Welcome screen and FunPrint screens:

Color of Background, Title Bar, Button

and Text

Import Logo image from USB drive.

Delete Logo image

Select Logo image

Note: When Easy Print1 or 2 service is active, these settings reflects Welcome screen only

Logo Image data requirements

Logo file type : png format Logo file size : 1000 x 1000 pixels or less

(Size of the sample logo file is 900 x 400 pixels)

Store logo images in the following folder;

/(USB)/Smartp/theme/***.png

Use Alphabet and number for a logo file name. Do not include space in the name.

Preview image is shown. (example)

Be sure to Set to save settings.

SETTINGS

Ver1.5

7. System Setting

SSID

Wi-Fi password

admin password

user password

Internal Wi-Fi setting for PC Box

SSID, Password and Channel setting as Access Point mode

*Internal Wi-Fi setting is always ON regardless of External Wi-Fi ON/OFF setting

Internal Wi-Fi setting for PC Box Client mode ON/OFF

External Wi-Fi (USB) ON/OFF

External Wi-Fi (LAN) ON/OFF

Valid domain setting for internet connection

Bridge mode ON/OFF

Automatically start up at Power ON, when enabled.

Automatically delete photo data after printing , when enabled.

Automatically copy photo data to a designated device, SD card or USB

Time Zone and Date, Time settings

Auto Archive will copy photo data to the following folder;

/(USB or SD )/SmartpImages/****(systemID)/OrderData

/PrintData

* System ID is shown on Setup Start menu. *"Auto Delete" must be disabled for activating Auto Archive. *When SD card is used, insert or remove a SD card while the PC box is powered off.

[Note] Do not connect more than one USB drive to the PC Box at the same time.

[Note] Be sure to reboot the PC after change of System Setting item(s).

Be sure to Set to save settings.

*Internal Wi-Fi setting is always ON regardless of External Wi-Fi ON/OFF setting

No remedy for forgetting password. Make a note of new password(s) if changed.

SETTINGS

Ver1.5

Internal Wi-Fi Client mode *

Bridge Mode

Mobile devices lose Internet connection while connected to the system via Wi-Fi.

Using Client mode and Bridge Mode, such mobile devices can access Internet, eg. photo storage in iCloud.

Internal Wi-fi (Client) : Enable Bridge Mode : Enable Set necessary valid domain name(s)

Network1

Internet

Network2

No Internet access Internet access

Bridge Mode : Internet access (Valid domain only) through PC Box

Client (Slave)

(Master)

Client (Slave)

Set SSID and password for Wi-Fi router (Master router) that PC Box accesses.

Set necessary network parameters by disabling DHCP, as needed.

*Client mode allows Internet access when Master router has Internet connection.

SETTINGS

Ver1.5

External Wi-Fi (USB) AP mode

External Wi-Fi (USB) Client mode *

External Wi-Fi (LAN) AP mode

External Wi-Fi (LAN) Client mode *

Set SSID and password for PC

Set SSID and password for Wi-Fi router (Master router) that PC Box accesses.

Set necessary network parameters by disabling DHCP, as needed.

External Wi-Fi (USB) setting for AP mode

1. Connect USB Wi-Fi adapter to a PC box.

- Make sure to plug the USB port of the

PC box before setting.

2. Apply External Wi-Fi (USB) settings

3. Reboot the system

- Some USB Wi-Fi adapter may not be

compatible.

External Wi-Fi (LAN) Setting for AP mode

1. Set access point settings as follows: Mode: Access point mode Access point name: any SSID Wired LAN setting: IP Address setting: Fixed IP Address: 192.168.110.250 Subnet mask: 255.255.255.0 DHCP server: Disabled

- Name of setting may differ depending on

model

- See operational manual of access point

device for detail

2. Connect the Wi-Fi access point with LAN cable to the LAN port of aPC box

3. Apply External Wi-Fi (LAN) settings

4. Reboot the system

*Client mode allows Internet access when Master router has Internet connection.

SETTINGS

Ver1.5

8. Additional Setting

9. Maintenance

Export Photo data

1) Select Original Photo, Finished Photo or All.

2) Insert USB Flash Drive to the system.

3) Tap Export

4) Wait until a dialog "Successfully completed!" is shown.

Clear Max Print count Limit per system *

Clear Max Print count Limit per each device *

* Max Print Count See 6.2 Print Limit setting

Original Photo data or Finished Photo data with a frame etc. or both can be manually exported to a USB Flash drive as a zip file.

"Auto Delete" at 7. System Setting must be disabled for use of this service.

*If "Auto Archive" at 7. System Setting is enabled, both data in JPEG format are automatically stored in a designated device.

Service setting : System setting items like SSID, password are not included.

Service & System setting : System setting items like SSID, password are included.

Export Service Setting

1) Select Service setting or Service & System setting.

2) Insert USB Flash Drive to the system.

3) Tap Export

4) Wait until a dialog "Successfully completed!" is shown.

5) Remove the USB drive

Import Service Setting

1) Insert USB Flash Drive including Export file to the system.

3) Tap Import

4) Tap OK on "Successfully completed!" dialog

5) Remove the USB drive and reboot the system.

(Not Available : Future option)

Delete All image data and print Info data.

(Statistics data is not deleted.)

Note:

Both systems for Export and Import must have the same software version.

FRAME SPECIFICATIONS - FUN PRINT

Ver1.5

Fun Print Layout setting　　Layout position - size chart

X Y W H X Y W H

9x13(3.5x5") 504 0 1046 1076 9x13(3.5x5") 0 0 1076 775

10x15(4x6") 602 0 1250 1226 10x15(4x6") 0 0 1226 926

- -

9x13(3.5x5") 517 54 968 968 15 x 8.9(6x3.5") 100 700 877 877

10x15(4x6") 675 62 1102 1102

9x13(3.5x5") 104 101 1342 874 Image1 59 54 437 305

10x15(4x6") 124 115 1605 996 Image2 59 385 437 305

13x18(5x7") 142 145 1844 1260 Image3 59 716 437 305

15x20(6x8") 162 174 2104 1504 Image4 565 54 922 967

15x23(6x9") 182 174 2365 1504 Image1 70 62 522 348

15x11(6x4.3") 124 126 1604 1094 Image2 70 439 522 348

15x21(6x8.3") 171 174 2226 1504 Image3 70 816 522 348

15x15(6x6") 124 112 1604 1604 Image4 675 62 1102 1102

13x13(5x5") 104 93 1342 1342

9x13(3.5x5") 0 0 1550 828 Image1 59 54 437 305

10x15(4x6") 0

0 1852 943 Image2 59 385 437 305

13x18(5x7") 0 0 2128 1192 Image3 565 54 922 967

15x20(6x8") 0 0 2428 1424 Image1 70 62 522 348

15x23(6x9") 0 0 2729 1424 Image2 70 439 522 348

15x11(6x4.3") 0 0 1852 1035 Image3 675 62 1102 1102

15x21(6x8.3") 0 0 2568 1424

15x15(6x6") 0 0 1852 1405

13x13(5x5") 0 0 1550 1175

9x13(3.5x5") 775 0 775 1076 Image1 70 100 522 348

10x15(4x6") 926 0 926 1226 Image2 70 477 522 348

Image3 700 100 877 877

9x13(3.5x5") 0 0 1076 1046 Image1 61 59 540 346

10x15(4x6") 0 0 1226 1250 Image2 61 420 540 346

Image3 61 782 540 346

Image4 61 1144 540 346

Image1 70 71 616 414

Image2 70 503 616 414

Image3 70 935 616 414

Image4

70 1367 616 414

9x13(3.5x5") 54 65 968 968 Image1 61 59 540 454

10x15(4x6") 63 69 1101 1101 Image2 61 548 540 454

Image3 61 1036 540 454

Image1 70 71 616 542

Image2 70 655 616 542

Image3 70 1239 616 542

9x13(3.5x5") 101 104 874 1342 87 71 451 361

10x15(4x6") 115 124 996 1605 87 527 451 361

87 982 451 361

9x13(3.5x5") 248 0 1040 1550 Image1 87 96 451 361

10x15(4x6") 186 0 1040 1852 Image2 87 529 451 361

Image3 87 962 451 361

Image4 87 1395 451 361

Image1

*Post card media is not

applicable

Image1

5x15(2x6")

*Post card media is not

applicable

Image1

9x13(3.5x5")

10x15(4x6")

Image1

9x13(3.5x5")

10x15(4x6")

Image1

15 x 8.9(6x3.5")

*Post card media is not

applicable

4 Image1

9x13(3.5x5")

10x15(4x6"

)

3 Image1

- -

Image1

*Post card media is not

applicable

9x13(3.5x5")

10x15(4x6")

Layout image

Print size Inch (cm)

Image

Setting values [pixel]

Image1

Preset

No.

Layout image

Print size Inch (cm)

Image

Setting values [pixel]

Preset

No.

[Caution] While Post card media is installed, do not set No. 11, 23, 26 and 27, or variable. The error state will continue if a photo with those print settings is sent to a printer.

( You cannot stop service even after reboot the PC.)

[Method of recovery from the continued error state]

1. Press and hold the power butto n of PC to shutdown.

2. Power off Printer.

3. Turn on PC.

4. Log in with Admin, stop the se rvice and go to Maintenance menu.

5. Tap "Clear all" to delete print jobs. ( All photo data will be deleted.)

6. Power on Printer.

or, load CK-D746, D768, D868 or D769 media (bo th ribbon and paper). The pending job will be printed.

FRAME SPECIFICATIONS - FUN PRINT

Ver1.5

X Y W H

9x13(3.5x5") 155 152 1240 772

10x15(4x6") 185 173 1482 880

13x18(5x7") 213 219 1702 1112

15x20(6x8") 243 261 1942 1330

15x23(6x9") 273 261 2183 1330

15x11(6x4.3") 185 190 1482 966

15x21(6x8.3") 257 261 2054 1330

15x15(6x6") 185 173 1482 1482

13x13(5x5") 155 144 1240 1240

Image1 81 96 451 361

Image2 81 529 451 361

Image3 81 962 451 361

Image4 81 1395 451 361

Image1 81 96 451 361

Image2 81 529 451 361

Image3 81 962 451 361

Image4 81 1395 451 361

Image1 81 71 451 361

Image2 81 527 451 361

Image3 81 982 451 361

Image4 694 71 451 361

Image5 694 527 451 361

Image6 694 982 451 361

Image1 81 71 451 361

Image2 81 527 451 361

Image3 81 982 451 361

Image4 694 71 451 361

Image5 694 527 451 361

Image6 694 982 451 361

9x13(3.5x5") 0 0 1550 1076

10x15(4x6") 0 0 1852 1226

13x18(5x7") 0 0 2128 1550

15x20(6x8") 0 0 2428 1852

15x23(6x9") 0 0 2729 1852

15x8.5(6x3.3") 0 0 1852 1030

15x8.9(6x3.5") 0 0 1852 1077

15x11(6x4.3") 0 0 1852 1346

15x21(6x8.3") 0 0 2568 1852

15x15(6x6") 0 0 1852 1827

13x13(5x5") 0 0 1550 1528

5x15(2x6") 0 0 1852 625

9x13(3.5x5") 0 0 1076 1550

10x15(4x6") 0 0 1226 1852

13x18(5x7") 0 0 1550 2128

15x20(6x8") 0 0 1852 2428

15x23(6x9") 0 0 1852 2729

15x8.5(6x3.3") 0 0 1030 1852

15x8.9(6x3.5") 0 0 1077 1852

15x11(6x4.3") 0 0 1346 1852

15x21(6x8.3") 0 0 1852 2568

15x15(6x6") 0 0 1827 1852

13x13(5x5") 0 0 1528 1550

5x15(2x6") 0 0 625 1852

256

Image1

102 Image1

10x15(4x6")

5x15(2x6") x2

*Post card media is not

applicable

101

Preset

No.

Layout image

Print size Inch (cm)

Image

Setting values [pixel]

29 Image1

10x15(4x6")

5x15(2x6") x2

*Post card media is not

applicable

967 967

10x15(4x6") 62 306 1102 1102

9x13(3.5x5")

Image1

FRAME SPECIFICATIONS - FUN PRINT Ver1.5

Frame image details for Fun Print (Underlaid frame)

1. Frame image specifications

Service Image format

Fun Print PNG file

2. Procedure of creating Frame image

3. Layout parameters setting

Image pixels

Frame file name

Example

Refer to the Print pixels

chart

Any file name.

A part of the file name is not shown if the file name is long.

5x15_frame1.png

(ex) Frame for 10x15 (2x6 )

1852

625

545

1772

1852

625

451

361

451

361

451

361

(x,y) = (0, 0)

(x,y) = (87, 71)

(x,y) = (87, 527)

(x,y) = (87, 982)

(2) Design contents of the frame.

(3) Specify a position and size of

area where photo image is to be fit.

*Transparent background is not

necessary for each image position.

(1) Prepare image data

fits

to a print size.

*Please note that approx. 4mm (40 dots) from the edge of image data will be trimmed off when printing for full-bleed.

Locate Service Setting - Fun Photo - Layout Edit

(1) Set Layout Variable (2) Set Canvas ( Portrait for this e xample) (3) Set position (x,y) and size (W,H) parameters for each Image.

In this example

Image 1: x =87, y=71, W=451, H=361 Image 2: z=87, y=527, W=451, H=361 Image 3: z=87, y=982, W=451, H=361

(4) Click Set

W [pixel] H[pixel]

L(9 x 13) 1550 1076

2L(13 x 18) 1550 2128 KG(10 x 15) 1852 1226 A5(15 x 20) 1852 2428

A5W(15 x 23) 1852 2729

15 x 8.5 1852 1030 15 x 8.9 1852 1077

11 x 15 1852 1346 15 x 21 1852 2568

15x15 1852 1827 13x13 1550 1528

5x15 1852 625

Print size

Print pixels

FRAME SPECIFICATIONS - EASY PRINT

Ver1.5

HotFolder setting Layout position - size chart

X Y W H X Y W H

Variable - - - - Variable - - - -

L (9 x 13) - - - - L (9 x 13) - - - -

2L (13 x 18) - - - - 2L (13 x 18) - - - -

KG (10 x 15) 602 0 1250 1226 KG (10 x 15) 63 69 1101 1101

A5 (15 x 20) 789 0 1639 1852 A5 (15 x 20) 95 90 1663 1443

A5W (15 x 23) - - - - A5W (15 x 23) - - - -

15 x 8.5 - - - - 15 x 8.5 - - - -

15 x 8.9 - - - - 15 x 8.9 - - - -

11 x 15 - - - - 11 x 15 - - - -

15 x 21 - - - - 15 x 21 - - - -

15 x 15 602 0 1250 1827 15 x 15 - - - -

13 x 13 13 x 13 - - - -

5 x 15 5 x 15 - - - -

Variable - - - - Variable - - - -

L (9 x 13) - - - - L (9 x 13) - - - -

2L (13 x 18) - - - - 2L (13 x 18) - - - -

KG (10 x 15) 675 62 1102 1102 KG ( 10 x 15) 115 124 996 1605

A5 (15 x 20) 894 95 1443 1663 A5 (15 x 20) - - - -

A5W (15 x 23) - - - - A5W (15 x 23) - - - -

15 x 8.5 - - - - 15 x 8.5 - - - -

15 x 8.9 - - - - 15 x 8.9 - - - -

11 x 15 - - - - 11 x 15 - - - -

15 x 21 - - - - 15 x 21 - - - -

15 x 15 682 94 1101 1641 15 x 15 - - - -

13 x 13 - - - - 13 x 13 - - - -

5 x 15 - - - - 5 x 15 - - - -

Variable - - - - Variable - - - -

L (9 x 13) - - - - L (9 x 13) - - - -

2L (13 x 18) - - - - 2L (13 x 18) - - - -

KG (10 x 15) 124 115 1605 996 KG (10 x 15) 186 0 1040 1852

A5 (15 x 20) - - - - A5 (15 x 20) 281 0 1571 2428

A5W (15 x 23) - - - - A5W (15 x 23) - - - -

15 x 8.5 - - - - 15 x 8.5 - - - -

15 x 8.9 - - - - 15 x 8.9 - - - -

11 x 15 - - - - 11 x 15 - - - -

15 x 21 - - - - 15 x 21 - - - -

15 x 15 - - - - 15 x 15 - - - -

13 x 13 - - - - 13 x 13 - - - -

5 x 15 - - - - 5 x 15 - - - -

Variable - - - - Variable - - - -

L (9 x 13) - - - - L (9 x 13) - - - -

2L (13 x 18) - - - - 2L (13 x 18) - - - -

KG (10 x 15) 0 0 1852 943 KG (10 x 15) 0 0 1226 926

A5 (15 x 20) 0 0 2428 1571 A5 (15 x 20) 0 0 1852 1214

A5W (15 x 23) - - - - A5W (15 x 23) - - - -

15 x 8.5 - - - - 15 x 8.5 - - - -

15 x 8.9 - - - - 15 x 8.9 - - - -

11 x 15 - - - - 11 x 15 - - - -

15 x 21 - - - - 15 x 21 - - - -

15 x 15 0 0 1852 1550 15 x 15 - - - -

13 x 13 - - - - 13 x 13 - - - -

5 x 15 - - - - 5 x 15 - - - -

Variable - - - - Variable - - - -

L (9 x 13) - - - - L (9 x 13) - - - -

2L (13 x 18) - - - - 2L (13 x 18) - - - -

KG (10 x 15) 926 0 926 1226 KG (10 x 15) - - - -

A5 (15 x 20) 1214 0 1214 1852 A5 (15 x 20) - - - -

A5W (15 x 23) - - - - A5W (15 x 23) - - - -

15 x 8.5 - - - - 15 x 8.5 - - - -

15 x 8.9 - - - - 15 x 8.9 100 700 877 877

11 x 15 - - - - 11 x 15 - - - -

15 x 21 - - - - 15 x 21 - - - -

15 x 15 - - - - 15 x 15 - - - -

13 x 13 - - - - 13 x 13 - - - -

5 x 15 - - - - 5 x 15 - - - -

Variable - - - -

L (9 x 13) - - - -

2L (13 x 18) - - - -

KG (10 x 15) 0 0 1226 1250

A5 (15 x 20) 0 0 1852 1639

A5W (15 x 23) - - - -

15 x 8.5 - - - -

15 x 8.9 - - - -

11 x 15 - - - -

15 x 21 - - - -

15 x 15 - - - -

13 x 13 - - - -

5 x 15 - - - -

4 10

5 11

2 8

3 9

Print size

Unit [pixel]

1 7

Type

Image

Print size

Unit [pixel]

Type

Image

FRAME SPECIFICATIONS - EASY PRINT

Ver1.5

Frame image details for Easy Print and Overlayed frame for FunPrint

1. Frame image specifications

Service Image format EasyPrint PNG file

FunPrint

2. Procedure of creating Frame image

(1) Prepare image data fits to a print size.

*Please note that approx. 4mm (40 dots) from the edge of image

data will be trimmed off when printing for full-bleed.

W [pixel] H[pixel]

L(9 x 13) 1550 1076

2L(13 x 18) 1550 2128

KG(10 x 15) 1852 1226

A5(15 x 20) 1852 2428

A5W(15 x 23) 1852 2729

15 x 8.5 1852 1030

15 x 8.9 1852 1077

11 x 15 1852 1346

15 x 21 1852 2568

15x15 1852 1827

13x13 1550 1528

5x15 1852 625

(2) Design contents of the frame.

(3) Specify a position and size of area where photo image is to be fit.

* The photo fitting area must be a transparent background.

If not, only frame image will be printed,

even if a photo data is sent to the system through wi-fi.

3. Setting of Photo fitting position by application

Open HotFolder setting of Maintenance menu,

1) set Layout "Variable"

2) set the image position and size at x, y, W, H setting window.

(for this example, x = 675, y = 62, W = 1102, H = 1102)

3) Click "Set" button.

Refer to the Print pixels chart

Image pixels

Frame file name

CP-D90DW Print pixels

Print size

Print pixels

Example

10x15_frame1.png

Any file name. A part of the file name is not shown if the file name is long.

(ex.) Frame for 10x15(4x6") size

1772

1852pixel

1146

1226

透過処理

H = 1102 W = 1102

(x, y) = (675, 62)

Transparent back ground

675

1102

HotFolder Setting

(x, y) = (0, 0)

Logo

Transparent background

Overlayed frame design

[Note] The overlayed frame will not be displayed on Fun Print Service screen on user's mobile device, but added on a print.

UPDATE

Wi-fi Print System Software Update Procedure

1. Log in the maintenance mode and make sure that the current System Version is the update applicable version designated by a release note.

Software update is valid for System ver1.1.0.0 or later versions.

2. Shutdown the system.

3. Using Windows PC, create "SmartpUpdate" folder at the root directory of a USB flash drive

and copy the update file "KT_V****.zip" in the folder.

/(USB)/SmartpUpdate/KT_V****.zip

4. Insert the USB flash drive to a USB port of the system.

5. Power On the PC. The software update starts automatically.

* Do not unplug the USB flash drive while updating.

* Refer to a release note for approx. time to complete the update.

6. After the update, the PC will soon reboot automatically. There is no obvious sign showing the timing of automatic reboot.

Check wi-fi SSID by a smart phone or other wireless device.

If the Wi-Fi SSID of your system stably appears, the system is already rebooted.

7. Log in the Start menu and confirm that the System version is updated.

1.1.0.0

Applicable versions

Ver.1.1 , 1.2, 1.3, 1.4

It takes about 20 minutes.

Delete print (order) data from Maintenance - Clear All.

(Save data first as necessary)

List of Print Media vs. Print Sizes

Size Print size W, H value [pixel]

9x13(3.5x5") -

Variable

1550 x (625～1076)

10x15(4x6") -

15x8.5(6x3.3") -

15x8.9(6x3.5") -

5x15(2x6") -

(5x15)x 2((2x6")x2) -

Variable

1852 x (625～1226)

9x13(3.5x5") -

13x18(5x7") -

13x13(5x5") -

Variable

1550 x (625～2128)

10x15(4x6") -

15x20(6x8") -

15x8.5(6x3.3") -

15x8.9(6x3.5") -

15x11(6x4.3") -

15x15(2x6") -

5x15(2x6") -

(5x15)x 2((2x6")x2) -

Variable

1852 x (625～2488)

10x15(4x6") -

15x20(6x8") -

15x23(6x9") -

15x8.5(6x3.3") -

15x8.9(6x3.5") -

15x11(6x4.3") -

15x21(6x8.5") -

15x15(6x6") -

5x15(2x6") -

(5x15)x 2((2x6")x2) -

Variable

1852 x (625～2729)

10x15(4x6") -

15x8.5(6x3.3") -

15x8.9(6x3.5") -

5x15(2x6") -

(5x15)x 2((2x6")x2) -

Variable

1852 x (625～1226)

Postcard 10x15(4x6") -

CK-D746-PF42

10x15(4x6") Perforated

10x15(4x6")

CK-D946PST 10x15(4x6")

CK-D768 CK-D868

15x20(6x8") 15x20(6x8")

CK-D769 15x23(6x9") 15x23(6x9")

CK-D746 10x15(4x6") 10x15(4x6")

CK-D757 13x18(5x7") 13x18(5x7")

Paper Ink Ribbon set

Media Name

displayed at Print

Info screen

Applicable print sizes

Model

CK-D735 9x13(3.5x5") 9x13(3.5x5")

FAQ

How to import and set custom frame for Easy Print.

1. Set Wi-Fi connecon to: .SelFone_Wi-Fi_Print

2. Go to: hp://192.168.110.1/maintenance/

3. Log in as an Admin & Stop service

4. Go to Top Menu > Service Seng > Web Print Seng a. Select Mode - Easy Print1/Easy Print 2 b. Select HotFolder: i.e. UserFolder_1 c. To add a custom frame, go to: Frame Seng > Import (i.e. 10x15_Type2.png)

i. Insert the USB storage device and click OK Note: Custom frame is selected in HotFolder Sengs > User Folder_1

d. Press Set to save Web Print Seng

5. Go to Top Menu > HotFolder Seng and set print speciﬁcaons: i.e. UserFolder_1

a. Set Print Size: i.e. 10x15 (4x6") b. Set Layout: i.e. 10x15_Type2 (Illustraon of layout is shown)

i. Refer to Easy Print Layout and Frame Chart for more details

c. To add a frame, select Frame: Frame Select > Choose the custom frame previously uploaded from the drop down menu: i.e. *10x15_Type2.png

d. To add text, select Text: Edit

i. Enable the Text Seng feature and add text. ii. Press Set to save Text Seng

e. Press Set to save HotFolder Seng

6. Go to Start page and Start Service

7. To verify seng changes, review Service Info in Start Page

a. Make sure to refresh the browser window to load revised sengs.

How to import and set custom frame for Fun Print.

1. Set Wi-Fi connecon to: .SelFone_Wi-Fi_Print

2. Go to: hp://192.168.110.1/maintenance/

3. Log in as an Admin & Stop service

4. Go to Top Menu > Service Seng > Web Print Seng a. Select Mode - Fun Print b. To add a custom frame, go to: Frame Seng > Import

i. Insert the USB storage device click OK Note: Custom frame is selected within Fun Print > Layout Seng > Edit

c. Select Layout Seng: Edit

i. Set Print Size: i.e. 5x15 ii. Set Layout: i.e. 5x15_Type26 (Illustraon of layout is shown) iii. To add a frame, select Frame: Choose the custom frame previously

uploaded from the drop down menu: i.e. *5x15_Type26.png

iv. Press Set to save Layout Seng

d. Press Set to save Web Print Seng

5. Go to Start page and Start Service

6. To verify seng changes, review Service Info in Start Page a. Make sure to refresh the browser window to load revised sengs.

How to re-name the Wi-Fi (SSID) and reset admin/user password

1. Set Wi-Fi connecon to: .SelFone_Wi-Fi_Print

2. Go to: hp://192.168.110.1/maintenance/

3. Log in as an Admin & Stop service

4. Go to Top Menu > System Sengs a. Login Seng: Type in new admin/user login password b. Wi-Fi seng: Type in new SSID name c. Press Set to save System Sengs

5. Go to Start page and Reboot

6. Aer restarng, connect to new SSID name and use new admin/user password

USB DRIVE

smartp

easyprint

frame

10x15_Type2.png 5x15_Type26.png

funprint

frame

PNGPNG

IMPORTANT:

Make sure to structure your USB drive with following folder layout.

For D90-WIFI-1 to recognize the custom frame, the .png ﬁle must be in a folder structure starng at the root directory: \smartp\easyprint\frame\ﬁlename.png.

MITSUBISHI ELECTRIC VISUAL IMAGING SYSTEMS

Professional Product Sales Phone: 888.307.0388 www.mitsubishi-imaging.com

MITSUBISHI ELECTRIC SALES CANADA, INC.

Display & Imaging Solutions Division Phone: 905.475.7728 www.mitsubishielectric.ca

USA/Latin America

Canada

• Wi-Fi is a trademark of the wi-ﬁ alliance.

• Intel® and Intel® NUC are registered trademarks of Intel Corporaon in the U.S. and other countries.

• iOS, iPhone and Safari are registered trademarks of Apple Inc., registered in the U.S. and other countries.

• Android is a registered trademark of Google Inc., in the U.S. and other countries.

• Canon and EOS are registered trademarks of Canon Inc.

• All informaon contained herein is subject to change without prior noce.

• Other brand, product, and service names are trademarks or registered trademarks of their respecve companies.

• Product appearance in this manual does not imply that Mitsubishi Electric Corporaon intends to make it available in all

countries where the company and its subsidiaries operate.

• Photographs are simulated images.

TROUBLE SHOOTING

Always start out by turning the smart phone or tablet oﬀ and back on again to see the issue persists.

How to properly shut down the system:

1. Press the NUC's power buon .

2. or using the applicaon, go to maintenance login: hp://192.168.110.1/maintenance/, log in as an administrator. On the start screen, tap Shutdown.

Warning:

• Do not unplug NUC from the power outlet w/o properly shung down the system.

• Do not uplug USB cable from the NUC to the printer w/o properly shung down the system.

If the App isn't responding:

1. If the app is having issues, acng slow or giving problems, reload the browser screen.

2. If reloading the screen does not work, check Wi-Fi connecon and make sure you are connected to .SelFone_WiFi_Print

If the Printer is not responding:

Note: When logged in as an administrator, the start screen will show System: Error

1. Make sure your printer is plugged in and power is on.

2. Make sure that USB connecon between the printer (Type B) and NUC (Type A) is secure.

3. Printer is out of paper and/or ink. a. Properly shut down the system and replace paper and/or ink, then power it back on and re-connect to the Wi-Fi.

If the NUC is not responding:

1. Make sure the NUC is plugged in and power is on.

2. Make sure that USB connecon between the NUC (Type A) and printer (Type B) is secure.

Mitsubishi Electric D90-WIFI-1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual