Mitsubishi Electric City Multi PUHY-P216TSKMU-A, City Multi PUHY-P120TKMU-A, City Multi PUHY-P96TKMU-A Datasheet

Model: PUHY-P216TSKMU-A

(Consists of One PUHY-P120TKMU-A, One PUHY-P96TKMU-A, and One CMY-Y100CBK3 Twinning Kit)

Job Name: Location:

Engineer Name: Contractor:

System No.: Date:

OUTDOOR VRF HEAT PUMP SYSTEM FEATURES

• 3-phase, 208/230V

• Modular variable refrigerant flow (VRF) systems;

smaller capacity units can be piped together to form a single,

large-capacity two-pipe system

• Required Twinning Kit allows for easy field piping connection

• Selectable fan static, 0.12 or 0.24"WG external static pressure;
factory set to 0"WG

• Connects to CITY MULTI indoor units; controlled via
CITY MULTI Controls Network (CMCN)

• External finish: Pre-coated Galvanized-steel Sheets

• Operating Temperature Range

Cooling (Outdoor): 23° ~ 115°F (-5° ~ +46°C) DB
Heating (Outdoor): -4° ~ +60°F (-20° ~ +16°C) WB

Specifications System Module 1 Module 2

Unit Type PUHY-P216TSKMU-A PUHY-P120TKMU-A PUHY-P96TKMU-A

Nominal Cooling Capacity Btu/h 216,000 120,000 96,000
Nominal Heating Capacity Btu/h 243,000 135,000 108,000

External Dimensions (H x W x D) In. / mm Refer to Module Data

Net Weight Lbs. / kg 1,220 / 557 697 / 316 532 / 241

Electrical Power Requirements Voltage, Phase, Hertz Refer to Module Data** 208 / 230V, 3-phase, 60Hz**

Cooling Power Input kW 16.90

Heating Power Input kW 19.26
Cooling Current (208/230V) R.L.A. 52.1 / 47.1
Heating Current (208/230V) R.L.A. 59.4 / 53.7
Minimum Circuit Ampacity

(MCA)**

Maximum Breaker Size**

Maximum Overcurrent Protection** A Refer to Module Data** 73 / 67** 57 / 52**

Piping Diameter

From Twinning Kit to Indoor Units
(Brazed) (In. / mm)

From Modules to Twinning Kit
(Brazed) (In. / mm)

Indoor Unit

Sound Pressure Levels dB(A) 62.5 60.0 58.0

Fan

Type x Quantity Propeller Fan x 2 Propeller Fan x 1

Airflow Rate CFM 11,300 6,200
Direct-drive Inverter Motor Output kW 0.92 + 0.92 0.92
Compressor Operating Range 8% to 100% Refer to System Data

Compressor Type x Quantity

Compressor Motor Output kW 8.1 7.1
Compressor Crankcase Heater kW - ­Refrigerant
Lubricant MEL32
High-pressure Protection Device
Compressor / Fan Protection Device Overheat Protection / Thermal Switch Overh
Inverter Protection Device Overheat / Overcurrent Protection Overheat / Overcurrent Protection

Blue Fin Anti-corrosion Protection: Cellulose- and polyurethane-resin coating treatment applied to condenser coil that protects it from air contaminants;
≥1μm thick; Salt Spray Test Method - no unusual rus

A Refer to Module Data** 45 / 42** 34 / 31**

A Refer to Module Data** 50** 40**

Liquid (High Pressure) 5/8 / 15.88

Gas (Low Pressure) 1-1/8 / 28.58

Liquid (High Pressure)
Gas (Low Pressure) 1-1/8 / 28.58 7/8 / 22.2
Total Capacity 50 to 130% of ODUs

Model / Quantity P06 ~ P96 / 2 to 46

t development to 480 hours.

Refer to Module Data

Refer to Module Data

Refer to Module Data

Refer to Module Data

Refer to Module Data

** Each individual module requires a separate electrical connection. Reference electrical data for each individual module.

PUHY-P120TKMU-A

PUHY-P96TKMU-A

OPTIONAL PARTS

□ Twinning Kit*.…………………………………...…….CMY-Y100CBK3

□ T-Branch Joint (≤ 72,000 Btu/h)………………..........CMY-Y102SS-G2

□ T-Branch Joint (≤ 144,000 Btu/h)……………….…....CMY-Y102LS-G2

□ T-Branch Joint (≤ 234,000 Btu/h)……………….........CMY-Y202S-G2

□ Header (4-Branch; ≤ 72,000 Btu/h)........………………CMY-Y104C-G

□ Header (8-Branch; ≤ 144,000 Btu/h)......………………CMY-Y108C-G

□ Header (10-Branch; ≤ 234,000 Btu/h)....………………CMY-Y1010C-G

* Twinning Kit is necessary to combine the refrigerant flows of the
modules and is sold separately.

65 x 68-29/32 x 29-5/23 /

1,650 x 1,750 x 740

Refer to System Data

Refer to System Data

Refer to System Data

1/2 / 12.7 3/8 / 9.52

Refer to System Data

Inverter-driven Scroll Hermetic x 1 Inverter-driven Scroll Hermetic x 1

601 psi / 4.15 MPa 601 psi / 4.15 MPa

65 x 488-1/16 x 29-5/32 /

1,650 x 1,220 x 740

R410A

eat Protection / Thermal Switch

Module : PUHY-P216TSKMU-A – DIMENSIONS

PUHY-P216TSKMU-A(-BS)

Outdoor unit 2

30(1-3/16)1750(68-29/32)

Intake

air

To indoor unit

To indoor unit

a

b

Gas Twinning pipe<optional parts>

Liquid Twinning pipe<optional parts>

e

f

c

d

Front view

Unit : mm(in.)

Outdoor unit 1

Discharge air

740(29-5/32) 1220(48-1/16)

Intake

air

1650(64-31/32)

Left view

Gas

d or fc or e

ø28.58(1-1/8)

ø22.2(7/8)

Liquid

ø12.7(1/2)

ø9.52(3/8)

P96

P120

Unit model

Twinning pipe~Outdoor unit

CMY-Y100CBK3

ø28.58(1-1/8)

ø15.88(5/8)

PUHY-P96TKMU-A(-BS)

PUHY-P120TKMU-A(-BS)

PUHY-P216TSKMU-A(-BS)

b

a

Gas

Liquid

Outdoor unit 2

Outdoor unit 1

Intake

air

Package unit name

Outdoor Twinning Kit(optional parts)

Indoor unit~Twinning pipe

Component unit name

Twinning pipe connection size

3.The pipe section before the Twinning pipe (sections "a" and "b" in the figure) must have at least 500mm(19-11/16) of straight section

Note 1.Connect the pipes as shown in the figure above. Refer to the table above for the pipe size.

2.Twinning pipes should not be tilted more than 15 degrees from the horizontal plane.

Be sure to see the Installation Manual for details of Twinning pipe installation.

(*including the straight pipe that is supplied with the Twinning pipe).

4.Only use the Twinning pipe by Mitsubishi (optional parts).