Mitox HTD600, HTS700 Operating Instructions

SAFETY & OPERATING INSTRUCTIONS

 READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE

WARNING:

THIS SYMBOL INDICATES IMPORTANT SAFETY PRECAUTIONS

HTD600 HEDGE-TRIMMERS

TECHNICAL SPECIFICATIONS

Name/Type HTD600

Net Weight kg 5.6

Total Length mm 1290

Total Width mm 270

Outward

Size

Total Height mm 280

Type double sided

Blade

Total Length mm 600

Power Transmission Method Automatic centrifugal clutch, spur gear, cam-crank

Reduction Rate

4.2 ：1 (63:15)

Type Single cylinder air cooling 2-cycle gasoline engine

Displacement Volume cc 25.4

Fuel T ank Capacity 0.65

Fuel Used

Mixture

25:1 (when using market oil)]

Lubricating Oil Used 2-cycle engine oil

Carburettor Diaphragm, rotary valve

Sparking method IC-controlled fly wheel magnet

Sparking Plug RCJ6Y

Starting Method Recoil starter

Sound power level 109dB

Engine

Vibration figures 7.2m/s2

As part of our policy of continuous product improvement, we reserve the right to alter or amend this
specification without notice. As a result, the product may differ from the information contained herein but
any alteration will only be implemented without notice if it is classified as an improvement to the above
specification.

HEDGE-TRIMMER DESCRIPTION

① Throttle control
② Rear handle
③ Starter
④ Front handle
⑤ Blade cover
⑥ Muffler assy.
⑦ Fuel tank
⑧ Clutch case
⑨ Cutting blade

Fig.2.

Fig.1.

1. Recoil Start

2. Fuel Tank Cap

3. Fuel Primer Bulb

1

2

3