Mitchell Engineering CAT 13920 Instruction Manual

1800 66900 6

www.mefe.com.au

Unauthorized reproduction or use of information herein is strictly forbidden

Instruction Manual

CAT 13920

DIAMOND POWER SHARPENER

Thank you for your purchase , please take a few moments to read this leaflet for

safe usage and operation of the Diamond power knife sharpener

Features

Easy use that guarantees sharp knives and tools

Suited to all sized blades including most

serrated and scalloped blades

Domestic and small industrial use, no skill required

Easy to clean and maintain, Dust magnet reducing contamination

Lightweight and portable with strong plastic body

No adjustment needed, Optimal set 34° 20mm diamond wheel

240V – running safe 24 V DC quote motor

Just plug in and sharpen – safe with no external moving parts

Super cool without water Technology

200x60x80mm 1kg easily fits in drawer

CE marked

1800 66900 6

www.mefe.com.au

Unauthorized reproduction or use of information herein is strictly forbidden

Instruction Manual

The DIAMOND POWER KNIFE SHARPENER HAS 3 SLOTS FOR SHARPENING , EACH
HAVE A DIFFERENT COARSENESS OF GRINDING
1 VVVVV The grinding slot nearest the body is for forming the correct angle
onto the edge of badly worn or damaged blades.

2 WWW Fine grinding wheels in the middle slot , this is for everyday sharpening

of most blades

2 The end slot is for honing , this is to give a fine finish to the cutting

edge and should be used most often to polish the edge back after use

Sharpening a blunt or damaged blade

1. Plug the unit into wall socket . Check that the machine is secure and safe – turn
on the plug

2. Gently lower the blade into slot 1 nearest to the motor handle

3. Slowly pull the blade back and for the until new edge is formed, this could take
between 5 and 30 motions depending on how baldy worn the blade is

4. Move the blade to the middle slot 2 and repeat the process – should take 4-5
strokes.

5. Move the blade to slot 3 and repeat step 4

Once sharp the blade can be maintained by regular use of the honing wheel in slot 3.
It is important not to press too hard , a medium sized blade should sharpen under its
own weight.