Mita-Kyocera KM-2030 PRODUCT TECHNICAL INFORMATION

Download

PRODUCT TECHNICAL INFORMATION

KM-2030

Preliminary Version 1-0 April 2001

Issued by: Product Support Department

The best solution. That's what I want.

In this ‘

concerning the KM-2030. We hope that this booklet provides you with useful data regarding perf ormance and construction of this model.

This booklet has been composed of the latest availab le data. Howev er, specification and design are subject to change without notification.

Product T echnical Information Booklet

Ky ocera Mita Europe 2001

’ you will find specifications and relev ant technical information

CONTENTS

1 General Specifications.................................................................... 4

1.1 Product Specifications............................................................................................. 4

1.1.1 Basic Specifications ................................................................................................ 4

1.1.2 Copier Specifications ............................................................................................... 5

1.1.3 Facsimile Specifications (the optional fax kit is necessary) ..................................... 5

1.1.4 Printer specifications (optional printing kit)............................................................... 7

1.1.5 Network printer specifications (optional network card).............................................. 9

1.2 Paper Specifications................................................................................................ 9

1.3 Lifetime Data ........................................................................................................... 9

2 Functions....................................................................................... 10

2.1 General Functions ................................................................................................. 10

2.2 Copier Functions.................................................................................................... 10

2.3 F acsimile Functions (the optional fax kit is necessary) .......................................... 13

2.3.1 Receiving Functions .............................................................................................. 13

2.3.2 Transmitting Functions........................................................................................... 13

2.3.3 Communicative Functions ..................................................................................... 13

2.3.4 Additional Communicative Functions ..................................................................... 14

2.3.5 Communication Support Functions ........................................................................ 14

2.3.6 Transmission Support Functions............................................................................ 1 4

2.3.7 Reception Support Functions................................................................................. 15

2.3.8 Report Functions ................................................................................................... 15

2.3.9 Local Party Information.......................................................................................... 1 5

2.3.10Other Functions ..................................................................................................... 15

3 Machine Construction .................................................................. 16

3.1 Scanning Section................................................................................................... 16

3.2 Memory ................................................................................................................. 16

3.3 Printing Section ..................................................................................................... 16

4.4 Photoconductor ..................................................................................................... 16

3.5 Charging Section ................................................................................................... 16

3.6 Developing Section ................................................................................................ 16

3.7 Transfer Section..................................................................................................... 1 7

3.8 Separation Section ................................................................................................ 17

3.9 Fixing Section........................................................................................................ 17

3.10 Charge Erasure Section ......................................................................................... 17

3.1 1 Cleaning System ................................................................................................... 17

4 T ec hnical Specifications............................................................... 18

4.1 Electrical Aspects ................................................................................................. 18

4.2 Environment / Safety Aspect................................................................................. 18

4.2.1 Work Environment ................................................................................................. 18

4.2.2 Approvals .............................................................................................................. 18

4.2.3 By-products ........................................................................................................... 18

4.3 Maintenance .......................................................................................................... 18

4.4 Reliability Data..................................................................................................18

5 Performance .................................................................................. 19

5.1 Image Quality ........................................................................................................ 19

5.1.1 Copy Image ........................................................................................................... 19

5.1.2 Print Image (the optional printer board is necessary) ............................................. 19

5.1.3 Image Area............................................................................................................ 20

5.2 Paper Feed / Conveying.....................................................................................21

APPENDIX 1 LIFETIME OF THE CONSUMABLE & MAINPARTS.....................................22

APPENDIX 2 MAINTENANCE LIST KM-2030 & OPTIONAL EQUIPENT.........................23

Product Technical Information KM-2030

1 General Specifications

1.1 Product Specifications

1.1.1 Basic Specifications

Model KM-2030 Type Desktop Function Standard: Copier

Option: Printer , Fax, Scanner Copy process indirect electrostatic process copying Resolution Scanning section: 600 x 600 dpi

Printing section: 600 x 600 dpi Originals Sheets, books or solid objects up to A3 Alignment Without DF: Left rear

With DF : Centre

Paper feed system

System Standard setting: 2 drawers and 1 stack bypass Optional setting: 4 drawers +1 stac k b ypass (Max 2 option ST-12)

Capacity Front dra wer: 250 sheets x2 (80 g/m²) up to 275 sheets of

specified standard paper.

Bypass: 50 sheets (80 g/m²) A4, A4R and A6R

25 sheets (80 g/m²) A3, Folio

Sizes Drawer : A5R ~ A3, folio (75 ~ 80 g/m²)

Bypass: A6R ~ A3, folio , en v elopes (60 ~ 160 g/m²)

Paper eject system

System Face-down inner injection Capacity Plain paper: 250 sheets (80 g/m²)

Special paper: 250 sheets or less

150 sheets or less when J-1302, AD-61 and AD-62 are installed

F-2205 At non sort mode: 500 sheets

At sort mode: 250 sheets

At staple mode: 250 sheets

Warm up time (20°C / 65%RH) Normal: 30 sec. or less

Preheat mode: 10 sec. or less (not fixed) (Restoration priority mode)

30 sec. or less (not fixed) (Energy save priority mode)

Machine size Copier:Approx. 550 (W) x 603 (D) x 554(H) mm

Copier , DF, duplex, finisher: Approx. 951 (W) x 671 (D) mm

Machine weight Copier: Approx. 46.4 kg

Preliminary Version April 2001 4 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

Optional equipment Document feeder: STDF-3 •Sheet-through ADF

SRDF-1 •Sheet-through RDF Paper f eeder: ST-12 •Max : 2 drawers Finisher: F-2205 Auto duplex unit: AD-61

AD-62 •Used when installing finisher. Original holder: Key counter: Job separator: J-1302 Fax kit Fax system (B) Printer kit Printing system (K) Network printer kit: NC-110 •Printer kit needs to be installed. Network scanner kit Scanner system (A)

1.1.2 Copier Specifications

Copy speed Single sided (memory copy mode / paper fed from the upper drawer)

A4: 20 copies/min. A4R: 13 copies/min. B4: 11 copies/min. A3: 10 copies/min. B5: 20 copies/min

DF single sided (normal copy mode / 1 copy per original / paper fed from the upper drawer) DF (A4 / 100 %): 20 copies/min. Memory sort cop y (paper fed from the upper dr aw er / 6 % duty)

10 sets of 10 single sided copies from 10 single sided original: 335 sec. or less

Rotation sort copy (paper fed from the upper and second drawers / 6 % duty)

10 sets of 10 single sided copies from 10 single sided original: 470 sec. or less

Double sided

10 sets of 5 double sided copies from 10 single sided original: 500 sec. or less 10 sets of 10 double sided copies from 10 double sided original: 1000 sec. or less

First copy (A4 / 100 %) Manual / AE: 5.5 sec. or less (without DF)

Manual: 7.5 sec. or less (with DF)

Zoom function 50 ~ 200 % (in steps of 1 %) Fixed magnifications 4R4 E Auto magnification selection (AMS) Refer to 2.2 Copier Functions.

Multiple copying Up to 250 copies

1.1.3 Facsimile Specifications (the optional fax kit is necessary)

Applicable line Subscriber line (1 line) CCITT G3 TX mode Half duplex Modulation TCM, QAM and PhM Coding method MMR, MR and MH (JBIG will be available) TX speed 33.6 / 31.2 / 28.8 / 26.4 / 24.0 / 21.6 / 19.2 / 16.8 / 14.4

/ 12.0 / 9.6 / 7.2 / 4.8 / 2.4 kbps Minimum TX time 5 msec./line (normal) / 5 msec./line (fine) Transfer time 4 sec. or less (memory TX, normal, ECM, no TTI with

Ky ocera Mita ITU-T No.1 original) Quick scanning 2 sec. or less Short protocol With Ky ocera Mita models (excluding V.34)

Pre-procedure: 5 sec. or less

Post-procedure: 3 sec. or less

Preliminary Version April 2001 5 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

Image memory Standard: 4 Mb

Option: 4 Mb

Bitmap memory Standard: 4 Mb (TX: 2Mb / RX: 2Mb)

Option: 4 Mb

Effective scanning width A3: 289 mm or more

B4R: 249 mm or more A4R: 202 mm or more

Fax TX image quality

B/W resolution Normal: 8 dots/mm x 3.85 lines/mm

Fine: 8 dots/mm x 7.7 lines/mm Super-fine: 8 dots/mm x 15.4 lines/mm Ultra-fine: 16 dots/mm x 15.4 lines/mm

Halftone (grey scale) Image processing + fine: 128 levels with error diffusion

Fax RX image quality

B/W resolution Normal: 8 dots/mm x 3.85 lines/mm

Fine: 8 dots/mm x 7.7 lines/mm Super-fine: 8 dots/mm x 15.4 lines/mm Ultra-fine: 16 dots/mm x 15.4 lines/mm

Modem (G3 modem)

TX mode Modulation TCM TCM QAM PhM

TX speed (KBPS)

Speed variation – 0.01% – 0.01% – 0.01% – 0.01% Modulation speed (KBPS) 3.429 / 3.2 / 3.0 / 2.8 / 2.4 2.4 2.4 2.4 / 1.6

Ca rr i er freque ncy (Hz)

Frequency variation – 0.01% – 0.01% – 0.01% – 0.01% Detection Synchronous Synchronous Synchronous Synchronous Automatic equalisation Yes Yes Yes Yes Tonal signal CNG / CED CNG / CED CNG / CED CNG / CED Tonal signal frequency (Hz) 1100 / 2100 1100 / 2100 1100 / 2100 1100 / 2100

Modem sig nal de tectio n range

Output level 0 ~ -15 dBm 0 ~ -15 dBm 0 ~ -15 dBm 0 ~ -15 dBm

19.2 / 16.8 / 14. 4 /

12.0 / 9.6 / 7.2 / 4.8 / 2.4

V34 V17 V29 V27ter

33.6 / 3 1 .2 / 2 8 .8 /

26.4 / 24.0 / 21.6 /

Low High 1600 1800 1680 1867 1800 2000

-9 ~ -43 dBm 0 ~ -43 dBm 0 ~ -43 dBm 0 ~ -43 dBm

14.4 / 12.0 /

9.6 / 7.2

1700 1700 1800

9.6 / 7 .2 4.8 / 2 .4

Preliminary Version April 2001 6 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

1.1.4 PRINTER SPECIFICATIONS (OPTIONAL PRINTING KIT)

T rade name Printing System (K) Type Hardware: Printer controller board

• Built-in board for Digital copier

CPU • Exclusive use for printer

Type: Po wer PC 405 Clock: 200 MHz

Memory • Exclusive use for printer

Code Rom: 4MB DIMM (16 Mbit x 2) Font Rom: 2MB AGFA Font (16 Mbit x 2) Main Ram: 8MB (expandable up to 136MB)

• SDRAM

Option Ram: 16 ---- 128MB x 1 slot

100pin-DIMM (16, 32, 64, 128MB)

API ROM: 42pin OTP-R OM 2MB socket equipped

Printing Speed A4R:18 sheets/min, 18 sheets/min

Resolution: 600x600 dpi

With smoothing equivalent to 1200 dpi to main scanning direction

Resolution enhancement is accomplished by KIR (Ky ocera image refinement).

With enhancement method Corresponding to 2400 dpi

2 steps: ON / OFF

• F actory setting is KIR on.

Gradation 2 tones / dot Operating environment Applicable OS: Windows 98/95, NT 4.0, 2000

Macintosh System 7.6.1 or more Mac OS 8.X

Controller software PDL: Prescribe 2e

Emulation: PCL, PJL

Line Printer IBM Proprinter X24E EPSON LQ-850 DIABLO 630 KPDL2 (Post Script 2 compatib le) AES support

Fonts Outline fonts: 80 fonts

Bitmap fonts: 1 font Download fonts: KY OCERA format / HP format / True Type format.

Graphics Raster graphics: 75, 100, 150, 200, 300, 600 dpi

Vector graphics: line, box, circle, arc, fill pattern etc One-dimension bar-code: 45 types Two-dimension bar-code: PDF 417 1 type

Connectivity Plug & Play f or Windo ws 95/98/2000

SNMP (Printer MIB support)

Preliminary Version April 2001 7 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

Interface High speed (bi-directional) parallel interface: 1 port

Nibble/ECP mode support

• Comform to IEEE 1284 Optional interface: 1 slot KUIO-LV • Made by SEH company: NC-110 Po wer supply DC-5V Memory card interface: 1 slot

Compact flash card: type 1 Support equipment/optional equipment Attachment software KY OCERA MITA Print Monitor • Network tool

Add-on memory 16  128MB 1 slot • General-purpose 72 pin SIMM, EDO-DRAM 60ns

(Not recomended Hitachi or hyundai Dimm memory).

Network board 10Base T , 100Base TX NC-110

Minimum operating environment

Client-IBM PC/AT or 100% compatible computer

Windows 95 Windows 98 Windows NT 4.0 CPU i486SX/25MHz i486DX/66MHz i486SX/25MHz Memory 8MB or more 16MB or more 16MB or more HDD 10MB or more 10MB or more 10MB or more FDD One 2HD 3.5-inch fl oppy disk dri ve CD-ROM One 12-inch CD-ROM drive Printer por t IEEE 1284 one por t

Client - Macintosh

Macintosh Macintosh

System 7.6.1 or more Mac OS 8.x CPU Power PC Power PC Memory 24MB 24MB HDD 10MB 10MB FDD One 2HD 3.5-inch floppy disk drive One 2HD 3.5-inch floppy disk drive CD-ROM One 12-inch CD-ROM drive One 12-inch CD-ROM drive Printer por t IEEE 1284 one port

Preliminary Version April 2001 8 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

1.1.5 Network Printer specifications (optional network card)

TypeHardware: Add-on I/F board NC-110

Interface Ethernet / 10 Base T/100 Base TX / RJ45

Multiprotocol support Interface auto recognition

Applicable protocols IPX/SPX

(Netware Directory Services, Bindery , R/Npriter) TCP/IP (BootP, DHCP, RARP, ARP, IP, ICMP, UDF, TCP, FTP, TFTP, LPD) WINS SNMP SMTP Ethertalk / Tokentalk phase 2 Http/ Html NetBUEI UNIX (TCP/IP) SNMP MIB II and private print server MIB HTML from 3.x / frame support

Applicable network OS Novel Netware 3.1/3.11/3. 12/4. 1/4. 11/5. 0/

Windows NT 3.5X/4.0 and win 2000 Windows 95/98 Mac OS 7.x, 8.x, 9.x UNIX AIX 3.0, SunOS, HP-UX, SNMP MIB II and private print server MIB HTML from 3.x / frame support

Configuration management KY OCON Administration software

Ky ocera Mita print monitor FTP Web browser SNMP management software

1.2 Paper Specifications

Copy paper size A6R ~A3, folio, envelopes (C5, DL)* Copy paper weight Recommended: 80 g/m²

60 ~ 160 g/m²

Copy paper types OHP, recycled paper, normal plain paper

* Envelopes can only be used when the machine is operated as a printer (optional board is necessary).

1.3 Lifetime Data

Copier 5 years or 450,000 sheets Recomemded Copy volume per month Max: 20,000 copies/prints Ave: 7,000 copies Developer and Drum 100,000 copies Toner 11,000

(measured under the recommended circumstance: A4 multiple copying / 5 % duty)

Preliminary Version April 2001 9 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

2 Functions

2.1 General Functions

Language selection Stop / clear Reset Auto clear: Off, 30 ~ 270 sec. (30 sec. increments) Preheat Possible to s witch “Restoration takes priority .” or

“energy saving takes priority” Auto preheat Off, 5 ~ 45 min. (5 min.increments) Auto shutoff Off, 15 ~ 240 min. (15 min.increments)

•When installing printer: Auto shutoff time is equal to the shift time to sleep mode. Original size detection Copier: Available

With DF: Availab le Total counter 6 digits mechanical counter Paper jam detection Paper jam number correction Paper size detection Cassette only Paper empty detection Cassette and bypass Non-stop paper replenishment T oner empty detection Partial operation: Duplex unit, each paper feed drawer(excluding bypass),

finisher Compulsory ejection(except for jammed paper) Dual access Triple access Silent mode On/off / Factory default: Off Display brightness adjustment Maintenance mode Error detection Ecomode T oner co verage Report output

2.2 Copier Functions

No. of copies setting 1 ~ 250 sheets Copy density control Normal: 5 or 9 steps

Max.: 11 or 15 steps Automatic density control Character & photo mode only Image mode Characte mode / photo mode / character & photo mode

(no discrete gradation areas) Auto paper selection Auto magnification selection Manual selection Magnification copy: Zoom, preset magnification, fixed magnification

ratios,magnification input Original size detection Copier, DF Paper size selection Cassette only Interrupt mode Auto start Automatic drawer change Department management 100 departments / 4 digit ID codes

Total copy count / separate copy counts (departments /

paper sizes) / ID code (registration / deletion) / copy

count reset / count check / count output

Preliminary Version April 2001 10 © Service Division

Kyocera Mita Europe B.V.

Paper size detection & selection specifications

A3 B4R A4R A4 B5R B5 A5R A5 B6R A6R Folio DL C5

Product Technical Information KM-2030

PA PER SIZE

Original si ze det ect i on

Drawer

Auto paper size

detection

Bypass

OOOOOOOXXXOXX

OOOOOOO O

OOOOOOOXOOOXX

Copy magnification ratios(AMS)

(%)

A3 B4 A4R A4 B5R B5 A5R B6R A6R Folio

A4R

B5R

100 86 70 70

115 100 81 81

141 122 100 100 86 86 70 61 X 100

___ ___ 100

163 141 115 115

COPY PAPER SIZE

61 61 50 X X 70

70 70 57 50 X 81

100 86 86 70 61 ___ ___

100 100 81 70 57 115

A5R 200 173 141 141

___ ___ 115

ORIGINAL DOCUMENT SIZE

B6R

A6R

Folio

___ 200 163 163

___ ___ 200 200

127 110 90 90

115 100 100 81 70 57 ___

122 122 100 86 70 141

141 141 115 100 81 163

173 173 141 121 100 200

77 77 64 55 X 100

Preliminary Version April 2001 11 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

Margin shift

Left margin: 6 ~ 18 mm (1mm increments)

Border erase

Sheet border erase: 6 ~ 18 mm (6mm increments) Book border erase: 6 ~ 18 mm (6mm increments)

Auto duplex copy (when installing optional duplex unit)

Duplex copy from book originals Binding selection: Non e Duplex copy from one-sided originals Normal: Paper face reversing Duplex copy from double sided originals when installing sheet-through RADF (3AL)

Split copy From doub le-sided originals: When installing sheet-through RADF (3AL) From book originals:

Auto selection When installing the DF Non-sort copy Sor t c opy Memory

Rotati on: When finisher is not installed Group copy When installing finisher Stacking mode When installing finisher Multiple copies with one scan Rotation copy When installing memory board N-up printing 2 in 1 / 4 in 1 Maintenance mode output Service simulation output

Auto stapling (when F-2205 is installed)

Preliminary Version April 2001 12 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

2.3 Facsimile Functions (the optional fax kit is necessary)

2.3.1 Receiving Functions

Manual RX Automatic RX TAD Remote switching F actory default: 55 (DTMF only)

2.3.2 Transmitting Functions

Numeric key dialing Up to 32 digits Abbreviated dialing Up to 100 numbers

One touch dial Up to 32 numbers (incl. Program / group / chain / fax

service dials) Program dial Group dial Chain dial Fax service dial

Redial Manual / automatic / communication error (not

availab le in the direct TX mode) On-hook Pause Dial No. confirmation

2.3.3 Communicative Functions

Direct TX Memory TX Direct RX Memory RX Confidential RX / Relay RX

Preliminary Version April 2001 13 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

2.3.4 Additional Communicative Functions

Sequential broadcast Up to 132 parties Polling TX Memory Polling RX Up to 132 parties F-code TX ITU-T T. 30 recommendation F-code confidential RX ITU-T T. 30 recommendation

10 Confidential boxes F-code Relay Broadcast ITU-T T. 30 recommendation: (Confidential Box 15) Encryption TX Encryption RX Pass word TX Pass word RX Memory forward

TX reservation Direct TX / Memory TX, Up to 50 reservations (incl.

Timer TX / interrupt TX) Timer TX Up to 50 reservations (incl. Direct TX / memory TX /

interrupt TX) Interrupt TX Up to 50 reservations (incl. Direct TX / memory TX /

timer TX) Short protocol With K yocera Mita models ECM

2.3.5 Communication Support Functions

Confidential box output Comply with F- Code Manual TX

Electric directory book TX suspension Line monitor Destination display T one TX Memory backup 60 min or more with 16 Mb TX result display

2.3.6 Transmission Support Functions

Sequential TX Up to 10 TXs TX information Bulletin board function Support function of memory polling transmission

comply with F- Code Rotate TX Duplex TX When SRDF is installed TX speed setting 33.6 / 14.4 / 9.6 kbps

Preliminary Version April 2001 14 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

2.3.7 Reception Support Functions

Out of paper RX Standard memory: 180 pages or more (Not fixed) Original ITU No. 1

W/ optional memory: 420 pages or more (Not fixed) Original ITU No. 1

2 in 1 RX 2 pages of A5 → A4R Auto reduction RX Rotate RX Duplex RX When duplex unit is installed Paper feed setting Automatic / fixed drawer / fixed size Forced output of RX Copy mode switching during RX Receiving date record

2.3.8 Report Functions

Transaction report T X / R X Activity report Up to 50 communications Po wer failure report Reservation confirmation report Timer reservation report User setting list Encryption key list Department management report Access code list Abbreviated dial list One touch dial list T elephone directory list Program list Group list

2.3.9 Local Party Information

Telephone number Up to 20 digits Name of party 1 ID number Telephone number settings Up to 10 numbers ID number settings Up to 10 numbers Memory forward Date recording No of remote switching 00 ~ 99 (2 digits) Pa ss word 0000 ~ 9999 (4 digits) Encryption key Up to 20 numbers (16 digits)

2.3.10 Other Functions

Memory edition Remote diagnosis Departmental fax control 50 departments Smoothing RX

Preliminary Version April 2001 15 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

3 Machine Construction

3.1 Scanning Section

System Flat bed scanning by CCD image sensor Alignment Document table: Left rear

ADF: Center Resolution 600 x 600 dpi Exposure adjustment: Constant lamp

3.2 Memory

Image memory Standard: 46.9 Mb (approx. 250 pages)

Option: None Bitmap memory 17.1 Mb

3.3 Printing Section

System Electro-photography by semiconductor laser Resolution 600 x 600 dpi

4.4 Photoconductor

Shape Drum (∅ 30 mm) Type Positive-charged OPC Common use KM-1530(2A V)/KM-1570(2AW)/KM-2070(2AY)

3.5 Charging Section

System Single corona charging (+) Cleaning Present

3.6 Developing Section

System Dual component developing,reversing Type Developer capacity 600 g Toner System: Toner container (non-compatibility: 7 types)

Capacity: 450g Density control system Developer density detection system Developing bias voltage DC (+) T emper ature and humidity sensor Present

Preliminary Version April 2001 16 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

3.7 Transfer Section

System Roller (-) Cleaning Present

3.8 Separation Section

System Curvature separation Separation claw Present

3.9 Fixing Section

System Heat roller fixing Heater Halogen heater (main: 850 W / sub: 910 W) Control system Thermister detection ON/OFF control Overheat prevention system Thermostat Fixing roller Heat roller: Reverse crown

Press roller: Straight

3.10 Charge Erasure Section

System Lamp exposure Lamp LED

3.11 Cleaning System

System Blade T oner recycling Waste toner collection Waste tone tank Present (replace this tank and toner cartridge at the

same time.)

Preliminary Version April 2001 17 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

4 T ec hnical Specifications

4.1 Electrical Aspects

Rating 220 ~ 240 V / 50 Hz

2.8 A (ave.) / 4.5 A (max.)

Po wer consumption Max.: 1080 W/h

Copying: 639 W/h

Standby: 42 W/h

Low power mode: 43 W/h

Transmission: ??? W/h

Reception: ??? W/h (normal / fine) Insulation voltage 1500 V/min. or 1650 V/sec.

Insulation resistance 2 MΩ or more (by 500 V megger) Earth continuity 0.1 Ω or less

4.2 Environment / Safety Aspect

4.2.1 Work Environment

Operation Temperature: 10 ~ 35 °C

Humidity: 15 ~ 85 %RH Storage Temperature: -20 ~ 40 °C

Humidity: 10 ~ 90 %RH

4.2.2 Approvals

GS / CE

4.2.3 By-products

Noise level Copying: 66 dB

Standby: 38 dB Dust 0.021 mg/m³ Ozone 0.002 mg/m³

4.3 Maintenance

Refer to the appendix for the detailed maintenance list. Maintenance interval 100,000 sheets

4.4 Reliability Data

MCBJ Drawer (1 sided): 12,000 sheets or more

Bypass(2 sided): 1.200 sheets or more

Drawer (2 sided): 3,600 sheets or more

Bypass(1 sided): 360 sheets or more

(MCBJ: average interval between paper jams) Reliability data are referring to the machine only under the recommended operation circumstances.

Preliminary Version April 2001 18 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

5 Performance

5.1 Image Quality

5.1.1 Copy Image

Resolution (centre of image) 8.8 lines/mm or more (100 %)

10 lines/mm or more (200 %)

4.4 lines/mm or more (50 %)

Reproduction of fine lines 8.0 lines/mm or more (100 %)

10.0 lines/mm or more (200 %)

4.4 lines/mm or more (50 %)

Magnification tolerance 100 % w/o DF: ± 0.8 %/total length / ± 0.8 %/50 mm or less

100 % w/ DF: ± 1.5 %/total length / ± 1.5 %/50 mm or less Squareness w/o DF: ± 1.5 mm/375 mm or less

w/ DF: ± 2.0 mm/375 mm or less Image distortion ± 1.0 mm/375 mm or less / ± 0.5 mm/50 mm or less

± 1.0 mm/200 mm or less / ± 0.5 mm/50 mm or less

5.1.2 Print Image (the optional printer board is necessary)

Printing position accuracy Horizontal: ± 2.0 mm

Longitudinal: ± 2.5 mm

Skew: 2.0 mm/200 mm or less Squareness ± 1.5 mm/375 mm or less Image distortion Total length: ± 1.0 mm/375 mm or less / ± 0.5 mm/50 mm long or

less

Preliminary Version April 2001 19 © Service Division

Kyocera Mita Europe B.V.

5.1.3 Image Area

IMAGE AREA (COPIER)

Product Technical Information KM-2030

B X

Y PL

IMAGE ARE (PRINTER)

(mm)

No image area

Imperfect image area

(mm)

A B C D

No image area

Imperfect image area

2.5+1.5/-2 3–2.5 2 .5 + 1.5/-2 3–2.5

3.0 or less 4.5 or less 3. 0 or less 10.0 or less

SIDE

A B C D

6.0–2.0 6.0 – 2.5 6.0 – 2.0 6.0 – 2.5

___ ___ ___ 10.0mm or less

SIDE

Preliminary Version April 2001 20 © Service Division

Kyocera Mita Europe B.V.

Effective Image Area (Printer)

Product Technical Information KM-2030

B X

Y PL

Portrait

(mm)

A3 B4 A4R A4 B5R B5 A5R B6R A6R Folio DL C5 Max. Min.

PAPER

SIZE

IMAGE

AREA

297.0 257.0 210.0 297.0 182.0 257.0 148.5 128.5 105.0 210.0 110.0 162.0 296.9 97.0

420.0 364.0 297.0 210.0 257.0 182.0 210.0 182.0 148.5 330.0 220.0 228.9 431.8 148.0

284.1 245.0 198.0 288.5 170.0 248.6 136.4 116.5 93.0 266.7 98.0 149.9 284.2 85.7

411.5 355.6 288.5 198.0 248.6 170.0 201.5 173.6 140.0 321.5 211.5 220.5 423.3 139.5

↑↑

↑: top of the PC display

↑↑

↑

↑↑

↑

↑↑

PAPER ENVELOPE

↑↑

!: conveying direction

USER

SETTING

Landscape

PAPER ENVELOPE

(mm)

A3 B4 A4R A4 B5R B5 A5R B6R A6R Folio DL C5 Max. Min.

PAPER

SIZE

IMAGE

AREA

297.0 257.0 210.0 297.0 182.0 257 .0 148.5 128.5 105.0 210.0 110.0 162.0 296.9 97.0

420.0 364.0 297.0 210.0 257.0 182.0 210.0 182.0 148.5 330.0 220.0 228.9 431.8 148.0

288.5 248.6 201.5 286.9 173.6 247.1 140.0 120.1 96.5 201.5 101.5 153.5 288.5 89.9

410.0 354.1 286.9 201.5 247.1 172.0 200.0 172.0 138.5 320.0 210.0 218.9 421.6 138.0

5.2 Paper Feed / Conveying

Leading edge timing tolerance ± 2.5 mm or less Paper f eed tolerance (skew ) ± 1.5 mm or less Side registration tolerance ± 2.0 mm or less

USER

SETTING

Preliminary Version April 2001 21 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

APPENDIX 1 LIFETIME OF THE CONSUMABLE & MAIN PARTS

The parts listed here should be replaced after the indicated number of copies.

KM-2030 CONSUMABLE P ARTS

__________________________________________________________________________________________ _______________________________________________________________________________________________

Description Part No. Quantity Lifetime (x1,000 copies)

Parts,Left registration cleaner ass’y SP 2AV93010A 1 200 Parts,Right registration cleaner ass’y SP 2AV93020A 1 200 Drum ass’y 2AV82010 1 100 Parts main charge ass’y A(SP) 2AR93420 1 100 Parts,Transfer roller ass’y SP 2AV93030 1 200 Cover doctor blade A ass’y 2AR93400 1 200 Blade, cleaning 2AV18030 1 100 Parts, seal cleaning lower A(SP) 2AR93410 1 200 Roller, heat 2A V20100 1 200 Parts, roller pressure, SP 2AB93040 1 200 Thermistor, fixing 2A V20250 1 200 Claw , separation (x5) 35920150 1 200

KM-2030 CH/RE P AR TS

____________________________________________________________________________________________________

Description Part No . Quantity

________________________________________________________________________________________________

Pulley, paper feed (cassette x 2) 2AV06010 1 Pulley, paper feed (bypass x2) 2AV06010 1 Lamp, scanner 2A V12100 2 Claw, separation (x3) 2AR18240 1 Bushing, heat roller (x2) 35920350 1 Bearing, pressure (x2) 35920130 1 Heater 120, fixing 2A V20140 2 Heater 230, fixing 2A V20140 2 Gear, heat roller 35 35920240 3

ST -12(3A5) CH/RE PARTS

____________________________________________________________________________________________________

Description Part No . Quantity Lifetime (x1,000 copies)

________________________________________________________________________________________________

Pulley, paper feed (x2) 2AV06010 1 Clutch, paper feed 2AV27330 1

STDF-3(3A7) CH/RE P AR TS

____________________________________________________________________________________________________

Description Part No. Quantity Lifetime (x1,000 paper feed counts)

________________________________________________________________________________________________

Pulley, paper feed (x2) 3A707020 5 50 Pulley, leading feed 3A707030 5 50 Friction plate, bypass 60907670 6 Static eliminator, eject 63212210 6

Note

The figures between brackets () show that the mentioned lifetime depends on the number of times that part has actually been used during operation. The counts can be checked by simulation.

Preliminary Version April 2001 22 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

APPENDIX 2MAINTENANCE LIST KM-2030 & OPTIONAL EQUIPMENT

LIST OF ABBREVIATIONS

Cl Clean Lu Lubricate Re Replace Ch/Ad Check and adjust Ch/Re Check and replace if necessary

0 On delivery U/C User's call

Preliminary Version April 2001 23 © Service Division

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

KM-2030 COPY Q’TY (X 1,000 COPIES) Page 1 of 3

DESCRIPTION Part No. Set up U/C 100 200 REMARKS

A SETUP

1 Developer

2 Toner

3 Disposall ta nk a ss ’y

4 Copy qua lit y

1 Contact glass 35912010

2 Original holder ass’y

1 Right roller, registration 2AV06060

2 Left roller, registration 2AV06070

Polley, paper feed

(cassette x2) Polley, paper feed

(bypass x1)

5 Left registration cleaner ass’y 2AV68010

6 Right registration cleaner ass’y 2AV68020

7 Clutches

8Other rollers

9 Cover, conveying 2AV04120

2AV06010

Re Re Re

ch/ad ch/ad ch/ad ch/ad

COVER

CL CL

CL CL CL

PAPER FEED and CONVEYING SECTION

CL CL

Cl Ch/Cl

Ch/RE Ch/RE Ch/RE

CL RE

Ch/RE CL RE

CL CL

CH/LU CH/LU

OPTICAL SECTION

Alcohol and then dry cloth

Alcohol or dry cloth

Vacuum

Vacuum Check the copy registration and paper feed

condition on registration, bypass and paper feed section

Alcohol or dry cloth CH:check abnormal sound, in case of sound,

apply grease TMP-200G(P/N, 66668050) to contact part between conveying cover and bushing, reverse roller.

1 Contact glass, ADF 2AV12250

2 Mirror A 2AV12150

3 Mirror B (x2) 2AV12160

4 Lens, scanner

5 Reflector, scanner

6 Lamp, scanner 2AV12100

7 Front rail, scanner

8 Rear rail, scanner

9 Sensor, original detection 35927290

CL CL

CH/RE Ch/RE

CH/CL

Alcohol and then dry cloth

Cleaning if there is problem (longitudinal line) on the image

Replace if there is problem on the image

Check abnormal noise and jitter Scanner rail grease PG-671(P/N60170000)

Alchol or dry cloth if there is problem (lighting part and light reception part)

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

KM-2030

DESCRIPTION Part No.

1Drum ass’y 2AV82010

2 Parts, main charger ass’y A(SP) 2AR93420

3 Lamp, cleaning lamp 2AR27031

4 Transfer roller ass’y 2A V68040

5 Front ground plate, drum drive

1 Cover doctor blade A ass’y 2AR93400

COPY Q’TY (X 1,000 COPIES)

Set up U/C 100 200

IMAGE FORMATION SECTION

RE RE

CL RE RE

CL CL

CL/CH/LU RE

CL/LU CL/LU

DEVELOPING SECTION

CL RE

Page 2 o f 3

REMARKS

CL: Clean with cleaning bar

Dry cloth CL:Vacuum

Pay attention not to give the flaw to the roller when cleaning CH: Check abnormal sound In case of sound, apply grease G501 to following place. Contact part between transfer roller/ collar transfer roller/bushing, rear pressure transfer roller/ reverse gear 18 and collar, transfer. incase of sound, apply grease GE334 to following place.

Clean with dry cloth and lubricate. Conductive grease GE334C(20G)(P/NA0199040)

Dry cloth. Pay attention not to deform

2 Seals in the developing unit

1 Blade, cleaning 2AV18030

2 Claw, separation (x3) 2AR18240

3 Shaft, drum 2AR08030

5 Rear bushing , drum shaft

6 Parts,seal cleaning lower A (SP) 2AR93410

7 Seal s i n t he cleaning uni t

CL CL

CLEANING SECTION

Re Re

CH/RE

CL CL

CH/RE

CL CL

Dry cloth or vacuum

Ch / Re if lines caused by claws appear on copies

Dry cloth4 Front bushing, drum shaft 2AR09230

Ch / Re if toner drops due to deformation of the seal

Dry cloth or vacuum

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

KM-2030

DESCRIPTION Par t No.

1 Roller, heat 2AV20100

2 Parts, roller pressure, SP 2AB93040

3 Bushing, heat roller (x2) 35920350

4 Bearing, pressur (x2) 35920130

5 Thermistor, fixing 2AV20250

6 Claw, separation (x5) 35920150

Heater 120, fixing

(KMA) Heater 230, fixing

(KME)

9 Gear, heat roller 35 35920240

10 Roller, eject 2AV20150

11 Pull ey, eject (x2) 2AV20160

2AV20130

2AV20140

COPY Q’TY (X 1,000 COPIES)

0 U/C 100 200

FIXING SECTION / OUTPUT FEEDER SECTION

CL CL RE

CH/RE

CH/RE CL RE

CH/RE CH/RE

CH/RE CH/RE CH/RE

CH/LUCLCH/LU

CL CL

Page 3 of 3

REMARKS

Alcohol

Check that the part is attached firmly, and the unusal noise is not caused

Alcohol CH: check the wearing condit i on of film

Alcohol

CH: check if t he l amp becomes dark or not

CH: check if the gears are broken or not CL:alcohol or dry cloth (rubber parts)

CH:check abnormal sound In case of sound, apply the grease TMP1200G(P/N6668049)to contact part between eject roller and rear side of bushing (29806810 bushing, 6 regist)

Alcohol or dry cloth

1 Gears

2 Bushings

3 Guides

OTHERS

LU LU

CL CL

Grease TMP1-200G(P/N 66668050)

Apply grease TMP1-200G(P/N 66668050) in case of arising unusual noise

Alcohol or dry cloth (PF, Conveying transfer and fixing section)

ST-12(3A5)

DESCRIPTION Part No. 0 U/C 100 200 300 REMARKS

1 Paper line

Pulley, paper feed

(x2)

2 Clutch, paper feed 2AV27330

3 Roller, conveying 3A506060

C OTHERS

1 Bushing

2 Paper conveying line

2AV06010

CH/AD CH/AD CH/AD CH/AD CH/AD

COPY Q’TY (X 1,000 COPIES)

SET UP

PF & CONVEYING SECTION

CH/RE CL CL CL

CH/RE CH CH CH

CL CL CL

CH/LU

CL CL CL

Alcohol or dry cloth

CH: check the condition Check the leading edge and PF condition in PF,

registratio n or bypass se ction

Alcohol or dry cloth

CH:check abnormal sound LU:grease TMP1-200G(P/N66668050)

Page 1 o f 1

Kyocera Mita Europe B.V.

Product Technical Information KM-2030

STDF-3(3A7)

DESCRIPTION Part No.

A SETUP

1 Paper line

B COVER

1 Contact glass, ADF 2AV12250 Ch/CLCLCLCLCLCL

2Covers

C PF SECTI ON

1 Pulley, paper feed (x2) 3A707020 2 Pulley, leading feed 3A707030 3 ADF size detection PCB 3A728020 4 Switch, feed 3AL27060 CH/CL CL CL CL CL CL Air brus h 5 Friction plate, bypass 60907670

D CONVEYING SECTION

1 Upper roller, registration 3A708010 CL CL CL CL CL 2 Lower roller, registration 2A708020

E EJECT SECTION

1 Upper roller, eject 3A710010 2 Lower roller, eject 3A710020 CL CL CL CL CL Alcohol or dry cloth 3 Static eliminator, eject 63212210

F OTHERS

1 MAT, original holder 3A708060 CL CL CL CL CL Alcohol or dry cloth 2 Sheet, reading 3A708080

3 Sponge, original size indicator 35912531

0 U/C 50 100 150 200 250

Ch/Ad Ch/Ad Ch/Ad Ch/Ad Ch/Ad Ch /Ad

Paper feed counts(X 1,000 )

CL CL CL CL CL CL

CL Re Re Re Re Re CL Re Re Re Re Re

CH/CL CL CL CL CL CL

CH/RE CH/RE CH/RE CH/RE CH/RE CH/RE

CL CL CL CL CL

CH/RE CH/RE CH/RE CH/RE CH/RE CH/RE

CL CL CL CL CL

Attach the mai n bo dy CL: clean both sides with alcohol or dry cloth

Alcohol

Clean with alcohol when visiting costomer Clean with alcohol when visiting costomer Air brush

Ch : check the wearing condition

Alcohol or dry cloth

CH: replace if damaged

Alcohol or dry cloth Attach the mai n bo dy

CL: alcohol or dry cloth

Page 1 o f 1

REMARKS

AD-62(For Finisher)(3A4)

AD-62(FINISHER)(3A4)

DESCRIPTION Part No.

A conveying section

1 Roller, duplex (x2) 3A416020

COPY Q’TY (X 1,000 COPIES)

0U/C100200

CL CL

AD-61(3A6)

DESCRIPTION Part No.

A conveying section

Roller, duplex

(x2)

2 Roller right eject 3A616020

3 Roller, left eject 3A616030

3A416020

COPY Q’TY (X 1,000 COPIES)

0U/C100200

CL CL

Page 1 o f 1

REMARKS

Alcohol or dry cloth

Page 1 o f 1

REMARKS

Alcohol or dry cloth

4 Tray, job separator 3A804020

CL CL

Clean black pad with air blow

Kyocera Mita Europe B.V.

J-1302(3a8)

Product Technical Information KM-2030

J-1302(3A8)

DESCRIPTION Part No.

A CONVEYING SECTION

1 Roller, eject 3A821180

2 Tray, job separator 3A8040 20

COPY Q’TY (X 1,000 COPIES)

0U/C100200

CL CL

Page 1 of 1

REMARKS

Alcohol or dry cloth

Clean black pad with air blow

F-2205(3BN)

DESCRIPTION Part N o.

A CONVEYING SECTION

1 Roller, eject 3BN06060

2 Roller, feed shift 3BN08090

3 Roller, pressure 3B N08570

BOTHERS

COPY Q’TY (X 1,000 COPIES)

0U/C100200

CL CL

Page 1 of 1

REMARKS

Alcohol or dry cloth

1 Needles (failure of stapli ng

2 Belt, side regi st rat io n 3BN07070

3 Rear belt, side registration 3BN07290

CL CL

AD AD

Cl Re

Remove the needles from magnet

Loosen and fasten a screw of tension plate

Kyocera Mita Europe B.V.

Mita-Kyocera KM-2030 PRODUCT TECHNICAL INFORMATION

Specifications and Main Features

Frequently Asked Questions

User Manual