Page 1
PRODUCT TECHNICAL INFORMATION
KM-1530
Preliminary version
April 2001
Issued by: Product support Department
Page 2
In this ‘
concerning the KM-1530. We hope that this booklet provides you with useful data regarding perf ormance and
construction of this model.
This booklet has been composed of the latest availab le data. Howev er, specification and design are subject to
change without notification.
©
Product T echnical Information Booklet
Ky ocera Mita Europe 2001
’ you will find specifications and relev ant technical information
Page 3
Contents
1 GENERAL SPECIFICATIONS ................................................................... 4
1.1 Product Specifications............................................................................................. 4
1.1.1 Basic Specifications ................................................................................................ 4
1.1.2 Copier Specifications ............................................................................................... 5
1.1.3 Printer specifications (optional printing kit)............................................................... 6
1.1.4 Network printing specifications (optional network card) ............................................ 8
1.1.5 Lifetime Data ........................................................................................................... 8
2 FUNCTIONS ............................................................................................... 9
2.1 General Functions ................................................................................................... 9
2.2 Copier Functions...................................................................................................... 9
3 MACHINE CONSTRUCTION ................................................................... 11
3.1 Scanning Section................................................................................................... 11
3.2 Memory ................................................................................................................. 11
3.3 Printing Section ..................................................................................................... 11
3.4 Photoconductor ..................................................................................................... 11
3.5 Charging Section ................................................................................................... 11
3.6 Developing Section ................................................................................................ 11
3.7 Transf er Section..................................................................................................... 12
3.8 Separation Section ................................................................................................ 12
3.9 Fixing Section........................................................................................................ 12
3.10 Charge Erasure Section ......................................................................................... 12
3.1 1 Cleaning System ................................................................................................... 12
4 TECHNICAL SPECIFICATIONS .............................................................. 13
4.1 Electrical Aspects ................................................................................................. 13
4.2 Environment / Safety Aspect................................................................................. 13
4.2.1 Work Environment ................................................................................................. 13
4.2.2 Approvals .............................................................................................................. 13
4.2.3 By-products (Blue angel testing method) ............................................................... 13
4.3 Maintenance .......................................................................................................... 13
4.4 Reliability Data....................................................................................................... 14
5 PERFORMANCE...................................................................................... 14
5.1 Image Quality ........................................................................................................ 14
5.1.1 Copy Image ........................................................................................................... 14
5.1.2 Print Image (the optional printer board is necessary) ............................................. 14
5.1.3 Image Area............................................................................................................ 15
5.2 Paper F eed / Conv eying......................................................................................... 16
APPENDIX 1 LIFETIME OF THE CONSUMABLE & MAIN PARTS..................................17
APPENDIX 2 MAINTENANCE LIST KM-1530 & OPTIONAL EQUIPMENT.....................18
APPENDIX 3 SPECIFICATIONS OF THE OPTIONAL EQUIPMENT ............................. 21
Page 4
Product Technical Information KM-1530
1 GENERAL SPECIFICATIONS
1.1 PRODUCT SPECIFICATIONS
1.1.1 BASIC SPECIFICATIONS
Model KM-1530
Type Desktop
Function Standard: Copier
Option: Printer
Network printer
Copy process Indirect electrostatic process copying
Resolution Scanning section: 600 x 600 dpi
Printing section: 600 x 600 dpi
Originals Sheets, books or solid objects up to A3
Alignment Main body: Left rear
With DF (optional): Centre
PAPER FEED SYSTEM
System Standard setting: 1 drawer + bypass
Optional setting: 4 drawers , + bypass (max. 3 optional ST-12)
Capacity Front dra wer: 250 sheets x 1 (80gsm)
•Up to 275 sheets of specified standerd paper
Bypass: 50 sheets (80 gsm) A4,A4R,A6R
25 sheets (80 gsm) A3, Follio
Sizes Front dr awer: A3 ~ A5R, folio, (75 ~ 80gsm)
Bypass: A3 ~ A6R, folio envelopes (60 ~ 160gsm)
PAPER EJECT SYSTEM
System Face-down (inner ejection)
Capacity Plain paper: 250 sheets (80 gsm)
150 sheets or less When job separator is installed
Special paper: 250 sheets or less
150 sheets or less When job separator is installed
Warm up time (20°C / 65%RH) Normal: 30 sec. or less
Preheat mode: ?? sec. or less (restoration priority mode)
?? sec. or less (energy save priority mode)
Machine size Copier: Approx. 550 (W) x 560 (D) x 455 (H) mm
Copier, DF, opt. drawers, finisher,mail box: Approx. 891 (W) x 596 (D) mm
Machine weight Copier: Approx. 38kg
Preliminary Version April 2001 4 ©
Kyocera Mita Europe B.V.
Service Division
Page 5
Product Technical Information KM-1530
Optional equipment Document feeder: STDF-3 •sheet through ADF
Paper f eeder: ST-12 •max. 3 drawers
Original holder:
Ke y counter
Job separator: J-1302
Printer kit: Printing System (K)
Network printer kit: NC-110 •Printer kit needs to be installed.
Memory board for copy:
MB-5 A/ 32MB
1.1.2 COPIER SPECIFICATIONS
Copy speed Normal copy , 100% magnification, No memory copy
A4: 15 copies/min.
A4R: 10 copies/min.
B4: 8 copies/min.
A3: 8 copies/min.
B5: 15 copies/min
B5 R 10 copies/min
Normal copy , 100% magnication, with memory board
A4: 18 copies/min
A4R: 12 copies/min
A3: 9 copies/min
B4: 10 copies/min
B5: 18 copies/min
With document feeder B5R: 12 copies/min
Without memory (normal copy mode / 1 copy per original
DF (A4 / 100 %): 14 copies/min.
With memory , sort copy (paper f ed from the upper dra wer / 6 % duty)
10 sets of 10 single sided copies from 10 single sided original: 365 sec. or less
Rotation sort copy (paper fed from the upper draw er and bypass 6 % duty)
10 sets of 10 single sided copies from 10 single sided original: 475 sec. or less
First copy (A4 / 100 %) Manual: 5.5 sec. or less (without DF)
Manual: 7.5 sec. or less (with DF)
Zoom function 50 ~ 200 % (in steps of 1 %)
Fixed magnifications 13R9E
Auto magnification selection (AMS) Refer to 2.2 Copier Functions.
Multiple copying Up to 250 copies
Preliminary Version April 2001 5 ©
Kyocera Mita Europe B.V.
Service Division
Page 6
Product Technical Information KM-1530
1.1.3 PRINTER SPECIFICATIONS (OPTIONAL PRINTING KIT)
T rade name Printing System (K)
Type Hardware: Printer controller board
• Built-in board for Digital copier
CPU • Exclusive use for printer
Type: Po wer PC 405
Clock: 200 MHz
Memory • Exclusive use for printer
Code Rom: 4MB DIMM (16 Mbit x 2)
Font Rom: 2MB AGF A Font (16 Mbit x 2)
Main Ram: 8MB (expandable up to 136MB)
• SDRAM
Option Ram: 16 ---- 128MB x 1 slot
100pin-DIMM (16, 32, 64, 128MB)
API ROM: 42pin OTP-ROM 2MB socket equipped
Printing Speed A4R:18 sheets/min, 18 sheets/min
Resolution: 600x600 dpi
With smoothing equivalent to 1200 dpi to main scanning
direction
Resolution enhancement is accomplished
by KIR
(Ky ocera image refinement).
With enhancement method Corresponding to 2400 dpi
2 steps: ON / OFF
• F actory setting is KIR on.
Gradation 2 tones / dot
Operating environment Applicable OS: Windows 98/95, NT 4.0, 2000
Macintosh System 7.6.1 or more
Mac OS 8.X
Controller software PDL: Prescribe 2e
Emulation: PCL, PJL
Line Printer
IBM Proprinter X24E
EPSON LQ-850
DIABLO 630
KPDL2 (Post Script 2 compatib le)
AES support
Fonts Outline fonts: 80 fonts
Bitmap fonts: 1 font
Download fonts: KYOCERA f ormat / HP format / T rue T ype
format.
Graphics Raster graphics: 75, 100, 150, 200, 300, 600 dpi
Vector graphics: line, box, circle, arc, fill pattern etc
One-dimension
bar-code: 45 types
Two-dimension
bar-code: PDF 417 1 type
Connectivity Plug & Play f or Windo ws 95/98/2000
SNMP (Printer MIB support)
Preliminary Version April 2001 6 ©
Service Division
Kyocera Mita Europe B.V.
Page 7
Product Technical Information KM-1530
Interface High speed (bi-directional) parallel interface: 1 port
Nibble/ECP mode support
• Comform to IEEE 1284
Optional interface: 1 slot
KUIO-LV • Made by SEH company: NC-110
Po wer supply DC-5V
Memory card interface: 1 slot
Compact flash card: type 1
Support equipment/optional equipment
Attachment software KY OCERA MITA Print Monitor • Network tool
Add-on memory 16 128MB 1 slot • General-purpose 72 pin SIMM, EDO-DRAM 60ns
(Not recomended Hitachi or hyundai Dimm memory).
Network board 10Base T , 100Base TX NC-110
Minimum operating environment
Client-IBM PC/AT or 100% compatible computer
Windows 95 Windows 98 Windows NT 4.0
CPU i486SX/25MHz i486DX/66MHz i486SX/25MHz
Memory 8MB or more 16MB or more 16MB or more
HDD 10MB or more 10MB or more 10MB or more
FDD One 2HD 3.5-inch floppy disk drive
CD-ROM One 12-i nch CD-ROM drive
Printer por t IEEE 1284 one port
Client - Macintosh
Macintosh Macintosh
System 7.6.1 or more Mac OS 8.x
CPU Power PC Power PC
Memory 24MB 24MB
HDD 10MB 10MB
FDD One 2HD 3.5-inch floppy disk drive One 2HD 3.5-inch floppy disk drive
CD-ROM One 12-inch CD-ROM drive One 12-inch CD-ROM drive
Printer por t IEEE 1284 one port
Preliminary Version April 2001 7 ©
Kyocera Mita Europe B.V.
Service Division
Page 8
Product Technical Information KM-1530
1.1.4 NETWORK PRINTER SPECIFICATIONS (OPTIONAL NETWORK CARD)
TypeHardware: Add-on I/F board NC-110
Interface Ethernet / 10 Base T/100 Base TX / RJ45
Multiprotocol support
Interface auto recognition
Applicable protocols IPX/SPX
(Netware Directory Services, Bindery , R/Npriter)
TCP/IP
(BootP, DHCP, RARP, ARP, IP, ICMP, UDF, TCP, FTP, TFTP, LPD)
WINS
SNMP
SMTP
Ethertalk / Tokentalk phase 2
Http/ Html
NetBUEI
UNIX (TCP/IP)
SNMP
MIB II and private print server MIB
HTML from 3.x / frame support
Applicable network OS Novel Netware 3.1/3.11/3. 12/4. 1/4. 11/5. 0/
Windows NT 3.5X/4.0 and win 2000
Windows 95/98
Mac OS 7.x, 8.x, 9.x
UNIX AIX 3.0, SunOS, HP-UX,
SNMP
MIB II and private print server MIB
HTML from 3.x / frame support
Configuration management KY OCON Administration software
Ky ocera Mita print monitor
FTP
Web browser
SNMP management software
1.1.5 LIFETIME DATA
Copier 5 years or 450,000 sheets
Recommended copy volume per month Max: 15,000 copies
Ave: 5,000
Developer and Drum 100,000 sheets
Toner 11,000 sheets
(measured under the recommended circumstance: A4 multiple copying / 6 % duty)
Preliminary Version April 2001 8 ©
Kyocera Mita Europe B.V.
Service Division
Page 9
Product Technical Information KM-1530
2 FUNCTIONS
2.1 GENERAL FUNCTIONS
Stop / clear
Reset
Auto clear Off, 30 ~ 270 sec. (in steps of 30 sec).
Preheat Possibe to switch “Restoration tak es priority” or
energy saving takes priority.”
Auto preheat Off, 5 ~ 45 min. (in steps of 5 min.)
Auto shutoff Off, 15 ~ 240 min. (in steps of 15 min.)
When installing printer: Auto shutoff time is equal to the shift time to sleep mode.
Original size detection Copier: Option
Paper size detection Cassette only
T otal counter 6-difit mechanical counter
Paper jam detection
Paper empty detection Cassette only
Paper f eed detection Bypass only
Non-stop paper replenishment
T oner empty detection
Partial operation Each paper feed drawer (Excluding bypass)
Compulsory ejection(except for jammed paper)
Dual access
Silent mode: Possible to s witch “ON”(0 sec.) or “OF”(30 sec.)
Time between drive stop and LSU stop
Maintenance mode
Error detection
Ecomode
Toner coverage Report out
Maintenance mode
Auto drawer change On/off
Special paper auto feed On/off
Silent mode On/off
2.2 COPIER FUNCTIONS
Copy density control Normal: 5 or 9 steps
Max.: 11 or 15 steps
Automatic density control Character & photo mode only
No. of copies setting 1 ~ 250
Image mode Character mode / photo mode / character & photo
mode (no discrete gradation areas)
Auto paper selection
Auto magnification selection
Manual selection
Auto paper/Auto magnification
Magnification copy: Zoom, fixed magnification ratios,magnification input
Original size detection Option
Paper size selection Cassette only
Interrupt mode
Auto start
Automatic drawer change
Departmental copy control 100 departments
Preliminary Version April 2001 9 ©
Kyocera Mita Europe B.V.
Service Division
Page 10
Product Technical Information KM-1530
ORIGINAL/PAPER SIZE DETECTION & SELECTION SPECIFICA TIONS
PAPER SIZE
A3 B4 A4R A4 B5R B5 A5R A5 A6R Folio DL C5
Original size detection OOOOOOOXX O XX
Auto p ape r siz e
detection
Drawer OOOOOOO O
Bypass
OOOOOOOXO O XX
COPY MAGNIFICATION RA TIOS (AMS)
(%) COPY PAPER SIZE
A3 B4 A4R A4 B5R B5 A5R B6R A6R Folio
A3
B4
A4R
A4
B5R
B5
A5R
B6R
ORIGINAL DOCUMENT SIZE
A6R
Folio
100 86 70 70
115 100 81 81
141 122 100 100 86 86 70 ___ ___ 100
___ ___ 100
163 141 115 115
___ ___ 115 115 100 100 81 ___ ___ 115
200 173 141 141
___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___
127 110 90 90
100 86 86 70 ___ ___ 100
61 61 50 ___ ___ 70
70 70 57 ___ ___ 81
100 100 81 ___ ___ 115
122 122 100 ___ ___ 141
77 77 64 ___ ___ 100
Margin shift
Margin: Left margin only
Custom margin: 1 ~ 18 mm (in steps of 1 mm)
Border erase
Sheet border erase: 6 ~ 18 mm (in steps of 6 mm) / Factory default: 6 mm
Book border erase: 6 ~ 18 mm (in steps of 6 mm)
Auto selection •when installing the DF and memory board
Non-sort copy
Sort copy Memory sort copy: When installing memory board
Rotation sort copy: When installing memory board
Multiple copies with one scan When installing memory board
Rotation copy When installing memory board
N-up printing: 2 in 1 and 4 when installing memory board
Maintenance mode output Self status report (machine, JAM, service call)
Service simulation output
User initial settings
Preliminary Version April 2001 10 ©
Service Division
Kyocera Mita Europe B.V.
Page 11
Product Technical Information KM-1530
3 MACHINE CONSTRUCTION
3.1 SCANNING SECTION
System Flat bed scanning by CCD image sensor
Alignment Document table:Left rear
ADF: Centre
Resolution Main: 600 dpi
Auxiliary: 600 dpi
Exposure adjustment Constant exposure lamp light quantity
Exposure source Fluorescent lamp / 12 W
3.2 MEMORY
Optional memory board 1
Bitmap memory capacity Standard: 0.0 MB
Option: 17.1 MB (MB-5A)
Image memory capacity Standard: 0.0 MB
Option: 14.9 MB (MB-5A)
3.3 PRINTING SECTION
System Electro-photography by semiconductor laser
Resolution 600 x 600 dpi
3.4 PHOTOCONDUCTOR
Shape Drum (∅ 30 mm)
Type DD35 Positive-charged OPC
Common use KM-2030
3.5 CHARGING SECTION
System Single corona charging (+)
Cleaning Present
3.6 DEVELOPING SECTION
System Dual component developing, reversing
Type
Developer capacity 600g
Toner Toner container: Non-compatibility 7 types
Capacity: 450 g
Density control Developer density detection system
Developing bias voltage DC (Positiv e)
T emper ature and humidity sensor Present
Preliminary Version April 2001 11 ©
Kyocera Mita Europe B.V.
Service Division
Page 12
Product Technical Information KM-1530
3.7 TRANSFER SECTION
System Roller (-)
Cleaning Present
3.8 SEPARATION SECTION
System Curvature separation
Claw Present
3.9 FIXING SECTION
System Heat roller fixing
Heater Type: Halogen heater
Rating: 230V Specification: 240V 910W
Control system Thermister detection ON/OFF control
Overheat prevention system Thermostat
Fixing rollers Heat roller: Reverse crown
Press roller: Straight
3.10 CHARGE ERASURE SECTION
System Lamp exposure
Lamp LED
3.11 CLEANING SYSTEM
System Cleaning blade
T oner recycling Waste toner collection
Waste toner tank Present
(replace this tank and toner cartridge at the same time)
Preliminary Version April 2001 12 ©
Kyocera Mita Europe B.V.
Service Division
Page 13
Product Technical Information KM-1530
4 TECHNICAL SPECIFICATIONS
4.1 ELECTRICAL ASPECTS
Rating 220 ~ 240 V / 50 Hz
2.8 A (ave.) / 4.5 A (max.)
Po wer consumption Max.: 1080 W/h
Copying: 639 W/h
Standby: 42 W/h
Low power mode: 43 W/h
Insulation voltage 1500 V/1 min. or 1650 V/1 sec.
Insulation resistance 1 M
Earth continuity 0.1 Ω or less
Ω or more (by 500 V megger)
4.2 ENVIRONMENT / SAFETY ASPECT
4.2.1 WORK ENVIRONMENT
Operation Temperature: 10 ~ 35 °C
Humidity: 5 ~ 85 %RH
Storage Temperature: -20 ~ 40 °C
Humidity: 10 ~ 90 %RH
4.2.2 APPROVALS
GS / CE
4.2.3 BY-PRODUCTS (BLUE ANGEL TESTING METHOD)
Noise level Copying: 65 dB
Standby: 37 dB (fan motor is rotating, LSU is stopped)
Dust 0,023 mg/m³
Ozone Average: 0,004 mg/m³
Styrene 0.035 mg/m³
4.3 MAINTENANCE
Periodic maintenance: 100,000 sheets
Average maintenance time: Within 30 min.
Main replaceable parts Photconductor: 100,000 sheets
Developer: 100,000 sheets
Others: See appendix for the detailed maintenance list.
Maintenance interval 100,000 sheets
Preliminary Version April 2001 13 ©
Kyocera Mita Europe B.V.
Service Division
Page 14
Product Technical Information KM-1530
4.4 RELIABILITY DATA
MCBJ Drawer (1 sided): 12,000 sheets
Bypass (1 sided): 1,200 sheets
(MCBJ: average interval between paper jams)
Reliability data are referring to the machine only under the recommended operation circumstances.
5. PERFORMANCE
5.1 IMAGE QUALITY
5.1.1 COPY IMAGE
Resolution (centre of image) 8.8 (w/0 DF) / 8.8 (w / DF) lines/mm or more (100 %)
10.10 (w/0 DF) / 9.9 (w / DF) lines/mm or more (200 %)
4.4 ( w/0 DF) / 4.4 (w / DF) lines/mm or more (50 %)
Reproduction of fine lines 8.0 lines/mm or more (100 %)
10.0 lines/mm or more (200 %)
4.4 lines/mm or more (50 %)
Magnification tolerance 100% w/0 DF: ± 1.0% total length / ± 1.0% 50mm or less
100% w/ DF : ± 2.0% total length / ± 3.0% 50mm or less
Magnified w/0 DF: ± 1.0% total length / ± 2.0% 50mm or less
Magnified w/ DF: ± 1.5% total length / ± 3.0% 50mm or less
Squareness w/0 DF: ± 1.5mm / 375mm or less
w/ DF: ± 2.0mm / 375mm or less
Image distortion w/0 DF: ± 1.5mm / 375mm or less / ± 0.5mm / 50mm / ±
1.0mm / 200mm / 0.5mm / 50mm long or less
5.1.2 PRINT IMAGE (THE OPTIONAL PRINTER BOARD IS NECESSARY)
Printing tolerance ± 0.8% total length / ± 0.8% / 50mm or less
Printing position accuracy Horizontal: ± 2.0mm
Longitudinal: ± 2.5mm
Skew: 2.0mm / 200mm or less
Squareness ± 1.5mm / 375mm or less
Image distortion total length ± 1.0mm / 375mm or less / ± 0.5mm / 50mm long or
less
Preliminary Version April 2001 14 ©
Service Division
Kyocera Mita Europe B.V.
Page 15
5.1.3 IMAGE AREA
Copier
Product Technical Information KM-1530
C
B X
!
A
Y
PL
Printer
(mm)
No image area
imperfect image area
SIDE
D
PW
imperfect image area
A B C D
6.0 – 2.0 6.0 – 2. 5 6.0+2.0 6.0 – 2.5
___ ___ ___ 10mm or less
(mm)
No image area
SIDE
A B C D
2.5+1.5/ -2.0 3.0 – 2.5 2.5+1.5/ -2.0 3.0 – 2.5
3.0 or less 4.5 or less 3.0 or less 10. 0 or less
Effective Image Area (Printer)
C
B X
!
A
Y
PL
(mm)
PAPER SIZE
IMAGE AREA
D
A3 B4 A4R A4 B5R B5 A5R B6R A6R Folio
PW
PL 420.0 364.0 297.0 210.0 257.0 182.0 210.0 182.0 148.5 330.0
X 284.1 245.0 198.0 288.5 170.0 248.6 136.4 116.5 93.0 266.7
Y
297.0 257.0 210.0 297.0 182.0 257 .0 148.5 128.5 105.0 210.0
411.5 355.6 288.5 198.0 248.6 170.0 201.5 173.6 140.0 321.5
PW
!
↑↑
↑
↑↑
↑
↑↑
!
<Portrait> <Landscape>
↑↑
P APER
↑↑
↑: top of the PC display
↑↑
!: conveying direction
Preliminary Version April 2001 15 ©
Kyocera Mita Europe B.V.
Service Division
Page 16
5.2 PAPER FEED / CONVEYING
Leading edge timing tolerance ± 2.5 mm or less
Paper f eed tolerance (skew ) ± 1.5 mm or less
Side registration tolerance ± 2.0 mm or less
Product Technical Information KM-1530
Preliminary Version April 2001 16 ©
Kyocera Mita Europe B.V.
Service Division
Page 17
Product Technical Information KM-1530
APPENDIX 1 LIFETIME OF THE CONSUMABLE & MAIN PARTS
The parts listed here should be replaced after the indicated number of copies.
KM-1530 CONSUMABLE P ARTS
______________________________________________________________________________________________
Description Part No. Quantity Lifetime (x1,000 copies)
_______________________________________________________________________________________________
Parts, Left registration cleaner, ass’y SP 2AV93010A 1 200
Parts, Right registration cleaner, ass’y SP 2AV93020A 1 200
Drum ass’y 2AV82010 1 100
Parts main charge ass’y A(SP) 2AR93420 1 100
Transfer roller ass’y (SP) 2AV93030 1 200
Cover doctor blade A ass’y 2AR93400 1 200
Blade, cleaning 2AV18030 1 100
Parts, seal cleaning lower A(SP) 2AR93410 1 200
Roller, heat 2AV20100 1 200
Parts, roller pressure, SP 2AB93040 1 200
Thermistor, fixing 2AV20250 1 200
Claw, separation (x5) 35920150 1 200
KM-1530 CH/RE P AR TS
____________________________________________________________________________________________________
Description P art No. Quantity
________________________________________________________________________________________________
Pulley, paper feed (cassette) 2AV06010 2
Pulley, paper feed (bypass) 2AV06010 1
Lamp, scanner 2AV12100 1
Claw, separation 2AR18240 3
Bushing, heat roller 35920350 2
Bearing, pressure 35920130 2
Heater 230, fixing 2AV20140 1
Gear, heat roller 35 35920240 1
ST -12(3A5) CH/RE PARTS
____________________________________________________________________________________________________
Description P art No. Quantity Lifetime (x1,000 copies)
________________________________________________________________________________________________
Pulley, paper feed 2AV06010 2
Clutch, paper feed 2AV27330 1
STDF-3(3A7) CH/RE P AR TS
____________________________________________________________________________________________________
Description P art No. Quantity Lifetime (x1,000 paper feed counts)
________________________________________________________________________________________________
Pulley, paper feed 3A707020 2 50
Pulley, leading feed 3A707030 1 50
Friction plate, bypass 60907670 1
Static eliminator, eject 63212210 1
Note
The figures between brackets () show that the mentioned lifetime depends on the number of times that part has actually been used
during operation. The counts can be checked by simulation.
Preliminary Version April 2001 17 ©
Kyocera Mita Europe B.V.
Service Division
Page 18
Product Technical Information KM-1530
APPENDIX 2 MAINTENANCE LIST KM-1530 & OPTIONAL EQUIPMENT
LIST OF ABBREVIATIONS
Cl Clean
Lu Lubricate
Re Replace
Ch/Ad Check and adjust
Ch/Re Check and replace if necessary
0 On delivery
U/C User's call
Preliminary Version April 2001 18 ©
Kyocera Mita Europe B.V.
Service Division
Page 19
Product Technical Information KM-1530
KM-1530 COPY Q’TY (X 1,000 COPIES) Page 1 of 3
DESCRIPTION Part No. Set up U/C 100 200 REMARKS
A SETUP
1 Developer
2 Toner
3 Disposall tank ass’y
4 Copy quality
B
1 Contact glass 35912010
2 Original holder ass’y
C
1 Right roller, registration 2AV06060
2 Left roller, registration 2AV06070
Polley, paper feed
3
(cassette x2)
Polley, paper feed
4
(bypass x1)
5 Left registration cleaner ass’y 2AV68010
6 Right registration cleaner ass’y 2AV68020
7 Clutches
8Other rollers
9 Cover, conveying 2AV04120
D
2AV06010
Re Re Re
Re
Re
ch/ad ch/ad ch/ad ch/ad
COVER
CL CL
CL CL CL
PAPER FEED and CONVEYING SECTION
CL CL
CL CL
Cl Ch/Cl
Ch/RE Ch Ch/RE
CL RE
CL RE
Ch/RE CL RE
CL CL
CH/LU CH/LU
OPTICAL SECTION
Alcohol and then dry cloth
Alcohol or dry cloth
Alcohol or dry cloth
Alcohol or dry cloth
Alcohol or dry cloth
Vacuum
Vacuum
Check the copy registration and paper feed
condition on registration, bypass and paper feed
section
Alcohol or dry cloth
CH:check abnormal sound, in case of sound,
apply grease TMP-200G(P/N, 66668050) to
contact part between conveying cover and
bushing, reverse roller.
1 Contact glass, ADF 2AV12250
2 Mirror A 2AV12150
3 Mirror B (x2) 2AV12160
4 Lens, scanner
5 Reflector, scanner
6 Lamp, scanner 2AV12100
7 Front rail, scanner
8 Rear rail, scanner
9 Sensor, original detection 35927290
CL CL
CL
CL
CL
CL
CH/RE Ch/RE
LU
LU
CH/CL
Alcohol and then dry cloth
Cleaning if there is problem (longitudinal line) on
the image
Cleaning if there is problem (longitudinal line) on
the image
Cleaning if there is problem (longitudinal line) on
the image
Cleaning if there is problem (longitudinal line) on
the image
Replace if there is problem on the image
Check abnormal noise and jitter
Scanner rail grease PG-671(P/N60170000)
Check abnormal noise and jitter
Scanner rail grease PG-671(P/N60170000)
Alchol or dry cloth if there is problem
(lighting part and light reception part)
Preliminary Version April 2001 19 ©
Kyocera Mita Europe B.V.
Service Division
Page 20
Product Technical Information KM-1530
KM-1530
DESCRIPTION Part No.
E
1Drum ass’y 2AV82010
2 Parts, main charger ass’y A(SP) 2AR93420
3 Lamp, cleaning lamp 2AR27031
4 Transfer roller ass’y 2AV68040
5 Front ground plate, drum drive
F
1 Cover doctor blade A ass’y 2AR93400
COPY Q’TY (X 1,000 COPIES)
Set up U/C 1 00 200
IMAGE FORMATION SECTION
RE RE
CL RE RE
CL CL
CL/CH/LU RE
CL/LU CL/LU
DEVELOPING SECTION
CL RE
Page 2 o f 3
REMARKS
CL: Clean with cleaning bar
Dry cloth
CL:Vacuum
Pay attention not to give the flaw to the roller
when cleaning
CH: Check abnormal sound
In case of sound, apply grease G501 to following
place.
Contact part between transfer roller/ collar
transfer roller/bushing, rear pressure transfer
roller/ reverse gear 18 and collar, transfer. incase
of sound, apply grease GE334 to following place.
Clean with dry cloth and lubricate.
Conductive grease GE334C(20G)(P/NA0199040)
Dry cloth. Pay attention not to deform
2 Seals in the developing unit
G
1 Blade, cleaning 2AV18030
2 Claw, separation (x3) 2AR18240
3 Shaft, drum 2AR08030
5 Rea r bushing, dr um shaft
6 Parts,seal cleaning lower A (SP) 2AR93410
7 Seals in the cleaning unit
CL CL
CLEANING SECTION
Re Re
CH/RE
CL CL
CL CL
CL CL
CH/RE
CL CL
Dry cloth or vacuum
Ch / Re if lines caused by claws appear on
copies
Dry cloth4 Front bushing, drum shaft 2AR09230
Ch / Re if toner drops due to deformation of the
seal
Dry cloth or vacuum
Preliminary Version April 2001 20 ©
Kyocera Mita Europe B.V.
Service Division
Page 21
Product Technical Information KM-1530
KM-1530
DESCRIPTION Part No.
H
1 Roller, heat 2AV20100
2 Parts, roller pressure, SP 2AB93040
3 Bushing, heat roller (x2) 35920350
4 Bearing, pressur (x2) 35920130
5 Thermistor, fixing 2AV20250
6 Claw, separation (x5) 35920150
Heater 120, fixing
7
(KMA)
Heater 230, fixing
8
(KME)
9 Gear, heat roller 35 35920240
10 Roller, eject 2AV20150
11 Pulley, eject (x2) 2AV20160 CL CL Alcohol or dry cloth
2AV20140
COPY Q’TY (X 1,000 COPIES)
0U/C100200
FIXING SECTION / OUTPUT FEEDER SECTION
CL CL RE
CL CL RE
CH/RE
CH/RE
CH/RE CL RE
CH/RE CL RE
RE CH/RE
CH/RE CH/RE
CH/RE CH/RE CH/RE
CL
CH/LUCLCH/LU
Alcohol
Alcohol
Check that the part is attached firmly, and the
unusal noise is not caused
Check that the part is attached firmly, and the
unusal noise is not caused
Alcohol
CH: check the wearing condition of film
Alcohol
CH: check if the lamp becomes dark or not
CH: check if the lamp becomes dark or not
CH: check if the gears are broken or not
CL:alcoho l or dry cloth (r ubbe r parts)
CH:check abnormal sound
In case of sound, apply the grease TMP1-
200G(P/N6668049)to contact part between eject
roller and rear side of bushing (29806810
bushing, 6 regist)
Page 3 o f 3
REMARKS
I
1Gears
2 Bushings
3 Guides
OTHERS
LU LU
CL CL
Grease TMP1-200G(P/N 66668050)
Apply grease TMP1-200G(P/N 66668050) in
case of ar ising unusual no i se
Alcohol or dry cloth
(PF, Conveying transfer and fixing section)
ST-12(3A5)
ST-12(3A5)
DESCRIPTION Part No. 0 U/C 100 200 3 00 REMARKS
A
1 Paper line
B
Pulley, paper feed
1
(x2)
2 Clutch, paper feed 2AV27330
3 Roller, conveying 3A506060
2AV06010
CH/AD CH/AD CH/AD CH/AD CH/AD
COPY Q’TY (X 1,000 COPIES)
SET UP
PF & CONVEYING SECTION
CH/RE CL CL CL
CH/RE CH CH CH
CL CL CL
Alcohol or dry cloth
CH: check the condition
Check the leading edge and PF condition in PF,
registratio n or bypass se ction
Alcohol or dry cloth
Page 1 o f 1
C OTHERS
1 Bushing
2 Paper conveying line
CH/LU
CL CL CL
CH:check abnormal sound
LU:grease TMP1-200G(P/N66668050)
Preliminary Version April 2001 21 ©
Kyocera Mita Europe B.V.
Service Division
Page 22
Product Technical Information KM-1530
STDF-3(3A7)
DESCRIPTION Part No.
A SETUP
1 Paper line
B COVER
1 Contact glass, ADF 2AV12250 Ch/CLCLCLCLCLCL
2Covers
C PF SECTIO N
1 Pulley, paper feed (x2) 3A707020
2 Pulley, leading feed 3A707030
3 ADF size detection PCB 3A728020
4 Switch, feed 3AL27060 CH/CL CL CL CL CL CL Ai r br us h
5 Friction plate, bypass 60907670
D CONVEYING SECTION
1 Upper roller, registration 3A708010 CL CL CL CL CL
2 Lower roller, registration 2A708020
E EJECT SECTION
1 Upper roller, eject 3A710010
2 Lower roller, eject 3A710020 CL CL CL CL CL Alcohol or dry cloth
3 Static eliminator, eject 63212210
F OTHERS
1 MAT, original holder 3A708060 CL CL CL CL CL Alcohol or dry cloth
2 Sheet, reading 3A708080
3 Sponge, original size indicator 35912531
0 U/C 50 100 150 200 250
Ch/Ad Ch/Ad Ch/Ad Ch/Ad Ch/Ad Ch/Ad
Paper feed counts(X 1,000 )
CL CL CL CL CL CL
CL Re Re Re Re Re
CL Re Re Re Re Re
CH/CL CL CL CL CL CL
CH/RE CH/RE CH/RE CH/RE CH/RE CH/RE
CL CL CL CL CL
CL CL CL CL CL
CH/RE CH/RE CH/RE CH/RE CH/RE CH/RE
CL CL CL CL CL
CL CL CL CL CL
Attach the mai n bo dy
CL: clean both sides with alcohol or dry cloth
Alcohol
Clean with alcohol when visiting costomer
Clean with alcohol when visiting costomer
Air brush
Ch : check the wearing condition
Alcohol or dry cloth
Alcohol or dry cloth
CH: replace if damaged
Alcohol or dry cloth
Attach the mai n bo dy
CL: alcohol or dry cloth
Page 1 o f 1
REMARKS
AD-62(For FINISHER)(3A4)
AD-62(FINISHER)(3A4)
DESCRIPTION Part No.
A conveying section
1 Roller, duplex (x2) 3A416020
COPY Q’TY (X 1,000 COPIES)
0U/C100200
CL CL
AD-61(3A6)
AD-61(3A6)
DESCRIPTION Part No.
A conveying section
Roller, duplex
1
(x2)
2 Roller right eject 3A616020
3 Roller, left eject 3A616030
3A416020
COPY Q’TY (X 1,000 COPIES)
0U/C100200
CL CL
CL CL
CL CL
Page 1 o f 1
REMARKS
Alcohol or dry cloth
Page 1 o f 1
REMARKS
Alcohol or dry cloth
Alcohol or dry cloth
Alcohol or dry cloth
4 Tray, job separator 3A804020
CL CL
Clean black pad with air blow
Preliminary Version April 2001 22 ©
Kyocera Mita Europe B.V.
Service Division
Page 23
J-1302(3A8)
Product Technical Information KM-1530
J-1302(3A8)
DESCRIPTION Part No. 0U/C100200 REMARKS
A CONVEYING SECTION
1 Roller, eject 3A821180 CL CL Alcohol or dry cloth
2 Tray, job separator 3A804020
COPY Q’TY (X 1,000 COPIES)
CL CL
Clean bla ck pa d w i th ai r blow
F-2205(3BN)
F-2205(3BN) COPY Q’TY (X 1,000 COPIES ) Page 1 of 1
DESCRIPTION Part No. 0U/C100200 REMARKS
A CONVEYING SECTION
1 Roller, eject 3BN06060
2 Roller, feed shift 3BN08090
3 Roller, pressure 3BN08570
B OTHERS
CL CL
CL CL
CL CL
Alcohol or dry cloth
Alcohol or dry cloth
Alcohol or dry cloth
Page 1 o f 1
1 Needles (failure of stapling
2 Be lt, side registration 3B N07070
3 Rear bel t, side regi stration 3BN07290
CL CL
AD AD
Cl Re
Remove the needles from magnet
Loosen and fasten a screw of tens io n plat e
Loosen and fasten a screw of tens io n plat e
APPENDIX 3 SPECIFICATIONS OF THE OPTIONAL EQUIPMENT
STDF-3
T y pe Copier mounted document feedr
Alignment Centre (face-up)
Original Sheet
Original size A3 ~ A5R, folio (140 (W) x 140 (L) mm ~ 297 (W) x 432 (L) mm)
Paper weight 50 ~ 160g/m²
Capacity A4 ~ A5R: Max. 70 sheets (50 ~ 80g/m²) execpt for the special paper
MDBJ 5,000 sheets
MDBMF Multiple feeding: 2,500 sheets
A3, B4: Max. 50 sheets (50 ~ 80g/m²) execpt for the special paper
Skew: 500 sheets
(MDBJ: average interval between original document jams)
(MDBMF: average interval between original document misfeedings)
Reliability data are referring to the machine only under the recommended operation circumstances.
Preliminary Version April 2001 23 ©
Kyocera Mita Europe B.V.
Service Division
Page 24
Product Technical Information KM-1530
PERFORMANCE
Leading edge timing tolerance ± 2.0 mm or less
Skew feed tolerance A4 or smaller: 2.0 mm or less
B4: 2.5 mm or less
A3: 3.0 mm or less
Machine life Confirm the copier specification
Maintenance interval 50,000 sheets
P ow er sour ce Electrically connected to the copier
Machine size Approx.525 (W) x 478 (D) x 121 (H) mm
Weight Approx. 6.9 kg
ST-12
Type Desk type
Number of drewers 1
Size detection Automatic
Paper size A3 ~ A5R, Folio
Paper w eight 75 ~ 80 g/m²
Paper type Plain paper / recycled paper
Capacity 250 sheets (80 g/m²) up to 275 sheets of specified standard
paper with moisture unadjusted.
Machine life Confirm the copier specification
Maintenance Interval 100,000 sheets
P ow er sour ce Electrically connected to the copier
Machine size Approx. 550 (W) x 560 (D) x 101.5 (H) mm
Machine weight Approx. 10kg
J-1302
Type Internal
Number of bins 1
Paper size A3 ~ A5R, folio
Paper w eight 75 ~ 80 g/m²
Paper type Plain paper / recycled paper
Capacity 100 sheets (80 g/m²)
(MCBJ: average interval between paper jams)
(MCBMF: average interval between paper misfeedings)
Reliability data are referring to the machine only under the recommended operation circumstances.
Machine life Confirm the copier specification
Maintenance interval 100,000 sheets
P ow er sour ce Electrically connected to the copier
Machine size Approx. 525 (W) x 445 (D) 78 (H) mm
Weight Approx. 1.6 kg
Preliminary Version April 2001 24 ©
Kyocera Mita Europe B.V.
Service Division
Loading...