Service Bulletin
1 / 3
SB Number:
Subject:
Model:
z An unusual image or malfunction may arise if certain units of the KM-2530 / 3530 are installed in the
FS-9100 / 9500DN and vice versa.
On
page 3
installed into the incorrect machine.
z Refer to the table on
by unit. Make sure to install each unit in the applicable model only!
z On
Note with regard to Maintenance kits:
As of the KM-2530 / 3530 and FS-9100DN / 9500DN the following components have been added extra in the
maintenance kits. Each maintenance kit includes the following common components (7 parts):
2AR07220 ‘PULLEY, PAPER FEED’ (Q’ty: 2)
2AR07230 ‘PULLEY, SEPARATION’ (Q’ty: 3)
2AR07240 ‘PULLEY, LEADING FEED’ (Q’ty: 3)
61706770 ‘UPPER PULLEY, BYPASS’ (Q’ty: 1)
2BL68290 ‘REGIST CLEANER ASS’Y’ (Q’ty: 1)
2BL16130 ‘GUIDE REGIST F’ (Q’ty: 2)
2BL07950 ‘UNDER CLEANER REGIST’ (Q’ty: 1)
page 2
FS-9100DN/9500DN are mentioned.
SB 2BJ-001
Units compatibility, possible malfunctions & contents of maintenance kits
KM-2530 / 3530, FS-9100DN / 9500DN
of this bulletin you will find an overview of which malfunctions may appear if a certain unit is
this page
of this bulletin the contents of the maintenance kits for both the KM-2530 / 3530 and
explaining the interchangeability / compatibility of the models specified
Issue Date: 27/11/2001
Applicable unit for each model
O: applicable model
Section Unit item Unit description
Drum 1 5PLPXHDAPKX DK-700 DRUM UNIT O
2 5PLPXHEAPKX DK-701 DRUM UNIT O
3 2BJ93020 DRUM UNIT OO
Fixing 4 5PLPXHGAPKX FK-700 (E) FUSER UNIT O For 200V spec.
5 5PLPXHHAAKM FK-700 (U) FUSER UNIT O For 120V spec.
6 5PLPXHJAPKX FK-701 (E) FUSER UNIT O For 200V spec.
7 5PLPXHKAAKM FK-701 (U) FUSER UNIT O For 120V spec.
8 2BJ93040 FUSER UNIT 120V OO For 120V spec.
9 2BJ93050 FUSER UNIT 230V OO For 200V spec.
Transfer 10 5PLPXHLAPKX TR-700 TRANSFER ASSY OO O
11 5PLPXNWAPKX TR-701 TRANSFER ASSY O
Developing 12 5PLPXHFAPKX DV-700 DEVELOPER UNIT OO
KM-
2530
KM-
3530
FS-
9100DN
FS-
9500DN
13 2BJ93010 DEVELOPER UNIT OO
Service Division, Kyocera Mita EHQ 5085 / SB 2BJ-001
Service Bulletin
2 / 3
Contents of maintenance kits (Q’ty: 1)
KIT item no. →→→→ 2BJ82020 2BJ82030 5PLPXHAAPKX 5PLPXGZAPKX 5PLPXHCAPKX 5PLPXHBAPKX
Unit item Unit description KIT destination →→→→
Drum
Fixing
5PLPXHDAPKX DK-700 DRUM UNIT OO
5PLPXHEAPKX DK-701 DRUM UNIT OO
2BJ93020 DRUM UNIT OO
5PLPXHGAPKX FK-700(E) FUSER UNIT O
5PLPXHHAAKM FK-700(U) FUSER UNIT O
5PLPXHJAPKX FK-701(E) FUSER UNIT O
5PLPXHKAAKM FK-701(U) FUSER UNIT O
2BJ93040 FUSER UNIT 120V O
2BJ93050 FUSER UNIT 230V O
O: applicable model
KIT Description →→→→
For KM-
2530/3530
SET,KIT
KM705U
For 120V For 200V For 120V For 200V For 120V For 200V
Maintenance
kit
SET,KIT
KM705E
For FS-9100DN
MK-700(U)
for FS-9100DN
Maintenance
kit
MK-700(E)
for FS-9100DN
For FS-9500DN
MK-701(U)
for FS-9500DN
Maintenance
kit
MK-701(E)
for FS-9500DN
Transfer
Developing
Each maintenance kit includes the following common components (7 parts):
2AR07220 ‘PULLEY, PAPER FEED’ (Q’ty: 2) 2AR07230 ‘PULLEY, SEPARATION’ (Q’ty: 3) 2AR07240 ‘PULLEY, LEADING FEED’ (Q’ty3)
61706770 ‘UPPER PULLEY, BYPASS’ (Q’ty: 1) 2BL68290 ‘REGIST CLEANER ASS’Y’ (Q’ty: 1) 2BL16130 ‘GUIDE REGIST F’ (Q’ty: 2)
2BL07950 ‘UNDER CLEANER REGIST’ (Q’ty: 1)
5PLPXHLAPKX TR-700 TRANSFER ASSY OO O O
5PLPXNWAPKX TR-701 TRANSFER ASSY OO
5PLPXHFAPKX DV-700 DEVELOPER UNIT OOO O
2BJ93010 DEVELOPER UNIT OO
Service Division, Kyocera Mita EHQ 5085 / SB 2BJ-001
Service Bulletin
3 / 3
Details about possible malfunctions when installing unit into incorrect machine
O: applicable model
(*) As for the DK-700/701, changes will be implemented so that a warning message will be displayed if the unit is installed in an incorrect machine.
Details will follow in a later Service Bulletin.
Unit item Unit description
Drum 1 5PLPXHDAPKX DK-700 DRUM UNIT X1 X1 O X2 X1 ‘C7410’ will be displayed and machine cannot be used anymore.
2 5PLPXHEAPKX DK-701 DRUM UNIT X1 X1 X3 O X2 No error is displayed and machine operates normally. However a foggy
3 2BJ93020 DRUM UNIT OOX4 X4 X3 No error is displayed and machine operates normally. The image however
Fixing 4 5PLPXHGAPKX FK-700(E) FUSER UNIT X5 X5 O X6 X5 ‘C6410’ is displayed and the machine cannot be used.
5 5PLPXHHAAKM FK-700(U) FUSER UNIT X5 X5 O X6 X6 No error is displayed and machine operates normally. However, fixing
6 5PLPXHJAPKX FK-701(E) FUSER UNIT X5 X5 X7 O X7 No error is displayed and machine operates normally. However, warm-up
7 5PLPXHKAAKM FK-701(U) FUSER UNIT X5 X5 X7 O X8 ‘Call for service 6410: ******’ will be displayed and machine cannot be used.
8 2BJ93040 FUSER UNIT 120V OOX8 X8
KM-
2530
KM-
3530
FS-
9100D
N
FS-
9500D
N
Malfunction when installing a unit in incorrect model
image may arise. (*)
may turn out too light. (*)
X4 ‘Call for service 7410: ******’ will be displayed and machine cannot be used.
(***** indicates the total counter value of total counter.)
problems may arise when multiple printing.
time may increase. Offset and fixing problems may arise.
9 2BJ93050 FUSER UNIT 230V OOX8 X8
Transfer 10 5PLPXHLAPKX TR-700 TRANSFER ASSY OOOX9 X9 No error is displayed and machine operates normally. However, separation
problems / creases may occur. Pulley mark from separation claw of drum
may remain on image.
11 5PLPXNWAPKX TR-701 TRANSFER ASSY X10 X10 X10 O X10 No error is displayed and machine operates normally. However, minor black
spots due to drum pinholes may arise.
Developing
12 5PLPXHFAPKX DV-700 DEVELOPER UNIT X11 X11 OOX11 ‘C7400: ******’ is displayed and the machine cannot be used.
13 2BJ93010 DEVELOPER UNIT OOX12 X12 X12 ‘Call for service 7400: ******’ is displayed and machine cannot be used.
Service Division, Kyocera Mita EHQ 5085 / SB 2BJ-001
Loading...