&KDSWHU#4 352'8&7# ,1)250$7,21
&RQWHQWV
414 3ULQWHU#LGHQWLILFDWLRQ#ODEHOLQJ/#SDJH#405
415 3ULQWHU#VSHFLILFDWLRQV/#SDJH#406
5HFRPPHQGHG#IODVK#FDUGV/#SDJH#407
416 )URQW#DQG#LQWHUQDO#YLHZV/#SDJH#408
#,QWHUQDO#&RPSRQHQW/#SDJH#409
417 6DIHW\#LQIRUPDWLRQ/#SDJH#40;
/DVHU#VDIHW\/#SDJH#40;
/DVHU#QRWLFH/#SDJH#40;
&'5+#UHJXODWLRQV/#SDJH#40<
2]RQH#FRQFHQWUDWLRQ/#SDJH#40<
)&&#QRWLFH/#SDJH#4043
,PSRUWDQW#QRWH#RQ#WKH#LQWHUIDFH#FRQQHFWRUV/#SDJH#4043
&DQDGLDQ#'HSDUWPHQW#RI#&RPPXQLFDWLRQV#FRPSOLDQFH#VWDWHPHQW/#SDJH#4043
$YLV#GH#FRQIRUPLWp#DX[#QRUPHV#GX#PLQLVWqUH#GHV#&RPPXQLFDWLRQV#GX#&DQDGD/#
SDJH#4044
,62#:::</#SDJH#4044
418 ,QVWDOODWLRQ/#SDJH#4045
(QYLURQPHQWDO#UHTXLUHPHQWV/#SDJH#4045
&OHDUDQFH/#SDJH#4045
3ODFHV#WR#DYRLG/#SDJH#4046
1RWHV#RQ#SRZHU/#SDJH#4046
419 $ERXW#WKH#WRQHU/#SDJH#4047
7RQHU#FRQWDLQHU#KDQGOLQJ/#SDJH#4047
7RQHU#VWRUDJH/#SDJH#4048
352'8&7# ,1)250$7,21
3ULQWHU#LGHQWLILFDWLRQ#ODEHOLQJ
414 3ULQWHU#LGHQWLILFDWLRQ#ODEHOLQJ
The printer bears its model and serial numbers on a label at its back. The label also contains
other safety precautions. Figures below show the printer labels in two different destinations
(versions).
)LJXUH#414 3ULQWHU#ODEHOV
(XURSH2$VLD22FHDQLD#YHUVLRQ
1-2
)609<33
352'8&7# ,1)250$7,21
3ULQWHU#VSHFLILFDWLRQV
415 3ULQWHU#VSHFLILFDWLRQV
7DE OH #41#4## 3ULQWHU#VSHFLILFDWLRQV³
,WHP 6SHFLILFDWLRQ
Print system Laser photoelectrography
Print speed
Print resolution 600 × 600 dpi
Smoothing KIR (2400 dpi equiv. [horizont al ] × 600 dpi [vertical])
First print for A4L at 23°C Approx. 10 seconds [Approx. 75 se conds from sleeping]
Warm-up time at 23°C 65 seconds or less
Maximum duty cycl e 75000 sheets
Laser type Visible laser
Main charging Positive scorotron charge
Image transfer Charged roller
Drum cleaning Counter blade
Erasure Illumination by LED array
Fusing Heat and pressure
Usable paper type Plain paper
Paper cassette capacity Main cassette —Approx. 250 sheets (75 g or 0.1 mm thickness paper), MP
Paper output tray capa ci ty Face-down tray—App rox. 350 sheets, Face-up tray— A pprox. 250 sheets
CPU PowerPC100MHz RISC Processor
System ROM 4 MB (16 Mbit × 2)
Resident font ROM 2 MB (16 Mbit × 1)
Main RAM 16 MB (SIMM)
Expansion RAM (SIMM) 48 MB max. (64MB in total)
Memory card SRAM or flash card (JEIDA 4.2/PCM CIA 2. 1)
Host interface Parallel/serial/option
PDL Prescribe 2e
Emulations HP LaserJet PCL6/PJL, IBM Proprinter X24E, Diablo 630, Epson LQ-
Weight and dimensions
Width 483 mm
Height 350 mm
Depth 550 mm (incl. cassette)
Weight 21 kg
Power requirements
Voltage requireme nts Europe/Asia/Ocean ia —AC 220-240 V ±10 %, 50 or 60 Hz ± 2 %
Watts Max. 917 W, normal 560 W, standby 166 W, sleep 26 W
Maximum current 9 A
Temperature/humidity 10 to 32.5°C/20 to 80 % RH
Altitude 2000 m
Noise
a
&RQWUROOHU#VHFWLRQ
(QYLURQPHQW
b
a. Printing the same page in copy mode
b. Excluding peaks; measured at 1m facing printer as per ISO7779
25 ppm for A4/Letter size lengthwi s e, 15. 5 ppm for B4, 13.5 ppm for A3/
Ledger size
tray—Approx. 100 sheet s (75 g or 0.1 mm thickness paper)
850, Line Printer
Printing—52 dB(A), standby— 38 dB(A), sleeping—unme asu rably low
)609<33
1-3
The details outlined in this manual are subject to modification in accordance with product
improvements.
5HFRPPHQGHG#IODVK#FDUGV
The FS-6900 printer provides support for a JEIDA/PCMCIA category of memory card in both
SRAM and flash types. The memory size of up to 32 MB is supported.
Following is a list of makes and models of flash cards recommended for use with the printers.
Note that the flash card to be used should be operative on +5 V DC.
7DE OH #41#5## 5HFRPPHQGHG#IODVK#FDUGV
0DNH 0RGHO &DSDFLW\
AMD AmC001CFLKA 1 MB
AmC002CFLKA 2 MB
AmC004CFLKA 4 MB
AmC101CFLKA 10 MB
AmC004DFLKA 4 MB
AmC008DFLKA 8 MB
AmC020CFLKA 20 MB
Fujitsu MB98A81063 1 MB
MB98A81183 2 MB
MB98A81273 4 MB
MB98A81373 8 MB
MB98A81473 16 MB
MB98A81573 32 MB
Panasonic BN-02MHF4C (CC) 2 MB
BN-04MHF4C (CC) 4 MB
Intel Series 2+/iMC004FLSP 4 MB
Centennial FL01M-20-11114-03 1 MB
FL02M-20-11114-03 2 MB
FL04M-20-11114-03 4 MB
FL08M-20-11114-03 8 MB
Maxell EF-2M-TB (DC) 2 MB
EF-4M-TB (DC) 4 MB
EF-8M-TB (DC) 8 MB
EF-16M-TB (DC) 16 MB
352'8&7# ,1)250$7,21
3ULQWHU#VSHFLILFDWLRQV
1-4
)609<33
352'8&7# ,1)250$7,21
)URQW#DQG#LQWHUQDO#YLHZV
416 )URQW#DQG#LQWHUQDO#YLHZV
3DSHU#HMHFWLRQ#UROOHU
)URQW#RSHUDWRU#SDQHO
3RZHU#VZLWFK
7RQHU#ERWWOH2GUXP
DFFHVV#GRRU
03#WUD\
)HHG#XQLW#UHOHDVH#OHYHU
)HHG#XQLW#UHOHDVH#OHYHU
3DSHU#FDVVHWWH
)HHG#XQLW
)609<33
0HPRU\#FDUG#VORW
1-5
#,QWHUQDO#&RPSRQHQW
7R S #FRYHU#VDIHW\#ORFN
352'8&7# ,1)250$7,21
)URQW#DQG#LQWHUQDO#YLHZV
/DVHU#VFDQQHU#XQLW
3DSHU#HMHFWLRQ#UROOHU
/LDLVRQ#ERDUG
8SSHU#XQLW#YHQWLODWLRQ#IDQ
PDQXDO#IHHG#DFWXDWRU
0DLQ#PRWRU
0HPRU\#FDUG#VORW
5HJLVW1#UROOHU#FOXWFK
)HHG#UROOHU#FOXWFK
1-6
)609<33
352'8&7# ,1)250$7,21
)URQW#DQG#LQWHUQDO#YLHZV
/DVHU#VFDQQHU#XQLW
5HDU#FRYHU
)DFH0XS#SDSHU#
HMHFWLRQ#VORW
2SWLRQ#LQWHUIDFH#
+&RYHUHG,
3DUDOOHO#LQWHUIDFH#<&5
6HULDO#LQWHUIDFH#<&6
2SWLRQ#LQWHUIDFH#
+&RYHUHG,
$&#SRZHU#UHFHSWDFOH
+LJK0YROWDJH
ERDUG
0DLQ#FKDUJHU#
XQLW
'UXP#XQLW
3RZHU#VZLWFK
)609<33
1-7
352'8&7# ,1)250$7,21
417 6DIHW\#LQIRUPDWLRQ
/DVHU#VDIHW\
This printer is certified as a Class 1 laser product under the U.S. Departme nt of Health and
Human Services (DHHS) Radiation Performance Standard according to Radiation Control for
Health and Safety Act of 1968. This means that the printer does not produce hazardous laser
radiation. Since radiation emitted inside the printer is completely confined within protective
housings and external covers, the laser beam cannot escape from the printer dur ing any phase of
user operation.
/DVHU#QRWLFH
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter
for Class I (1) laser products, and elsewhere is certified as a Class I laser produ ct con form ing to
the requirements of IEC 825.
Class I laser products are not considered to be hazardous. Th e printer contains intern ally a Class
IIIb (3b) laser that is nominally a 5 milliwatt laser operating in the wavelength region of 670
nanometers. The laser system and printer are designed so there is never any human access to
laser radiation above a Class I level during normal operation, user maintenance, or prescribed
service condition.
6DIHW\#LQIRUPDWLRQ
Laser product labels are located on top of the laser scanner:
1-8
)609<33
352'8&7# ,1)250$7,21
6DIHW\#LQIRUPDWLRQ
)LJXUH#415 /DVHU#QRWLFH#ODEHO
:DUQLQJ 8VH#RI#FRQWUROV#RU#DGMXVWPHQWV#RU#SHUIRUPDQFH#RI#SURFHGXUHV#RWKHU#
WKDQ#WKRVH#VSHFLILHG#KHUHLQ#PD\#UHVXOW#LQ#KD]DUGRXV#UDGLDWLRQ#H[SR0
VXUH1
&'5+#UHJXODWLRQV
The Center of Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply
to laser products manufactured after August 1, 1976. Compliance is mandatory for products
marketed in the United States. A label indicating complian ce with the CDRH regulations must
be attached to laser products marketed in the United States.
2]RQH#FRQFHQWUDWLRQ
Laser printers generate ozone gas (O3) which may concentrate in the place of installation and
cause an unpleasant smell. To minimize the concentration of ozone gas, we recommend that the
laser printer not be installed in a confined area lacking ventil ation.
)609<33
1-9
352'8&7# ,1)250$7,21
6DIHW\#LQIRUPDWLRQ
)&&#QRWLFH
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 1 5 of th e FCC Rul es. These limits ar e designed t o provi de reasonabl e protecti on
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit d ifferen t fro m that to which the receiver is
•
connected.
Consult the dealer or an experienced radio/TV technician for help.
•
Change or modifications not expressly approved by th e manufacturer for compliance could void
the userís authority to operate the equipment.
Interference cable to the computer shall be used with shielded circular cable.
Any modification without prior permission may cause harmful interface. If any modification/
change is introduced to this equipment without prior permission, Kyocera, as the man ufactur er,
cannot guarantee compliance with FCC rules.
To use equipment which does not comply with FCC rules is prohibited . Conf orming to Class B
limits, the printer may be optionally in stalled with the following units:
DU-25 Duplexer
•
PF-26 Paper Feeder
•
PK-series KPDL Upgrade Kit
•
,PSRUWDQW#QRWH#RQ#WKH#LQWHUIDFH#FRQQHFWRUV
Be sure to turn off printer power before connecting or disconnecting an interface cable to the
printer.
:DUQLQJ 7KLV#HTXLSPHQW#KDV#EHHQ#FHUWLILHG#WR#FRPSO\#ZLWK#WKH#OLPLWV#IRU#D#&ODVV#
%#FRPSXWLQJ#GHYLFH/#SXUVXDQW#WR#6XESDUW#-#RI#3DUW#48#RI#)&XOHV1#
2QO\#SHULSKHUDOV#+FRPSXWHU#LQSXW2RXWSXW#GHYLFHV/#WHUPLQDOV/#HWF1,#FHU0
WLILHG#WR#FRPSO\#ZLWK#WKH#&ODVV#%#OLPLWV#PD\#EH#DWWDFKHG#WR#WKLV#HTXLS0
PHQW1#2SHUDWLRQ#ZLWK#QRQ0FHUWLILHG#SHULSKHUDOV#LV#OLNHO\#WR#UHVXOW#LQ#
LQWHUIHUHQFH#WR#UDGLR#DQG#79#UHFHSWLRQ1#
&DQDGLDQ#'HSDUWPHQW#RI#&RPPXQLFDWLRQV#FRPSOLDQFH#VWDWHPHQW
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulatio ns .
1-10
)609<33
352'8&7# ,1)250$7,21
6DIHW\#LQIRUPDWLRQ
$YLV#GH#FRQIRUPLWp#DX[#QRUPHV#GX#PLQLVWqUH#GHV#&RPPXQLFDWLRQV#GX#
&DQDGD
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
,62#:::<
Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der höchste Schalldruckpegel
beträgt 70 dB( A) oder weniger gemäß
ISO
7779.
)609<33
1-11
418 ,QVWDOODWLRQ
(QYLURQPHQWDO#UHTXLUHPHQWV
(QYLURQPHQWDO#FRQGLWLRQV
Environmental conditions described in Table 1. 1 on page 1-3 should be observed to ensure the
optimum operation of the printer. The use of the printer in a location which does not satisfy the
requirements may result in troubles and risk shortening its service life.
The printer will work best if it is installed in a location that is:
Level and well supported (Place the printer on a sturdy table or desk.)
•
Not exposed to sunlight or other bright light (not next to an uncurtained window). Do not
•
place the printer on an unstable cart, stand, or table.
Near an AC wall outlet, preferably one that can be used for the printer alon e (See Table 1. 1
•
on page 1-3). (The outlet shoul d have a g round s lot, or an adapto r shou ld be us ed. If yo u use
an extension cord, the total length of the power cord plus extension cord should be 17 feet
or 5 meters or less.
352'8&7# ,1)250$7,21
,QVWDOODWLRQ
Well ventilated, not too hot or cold, and not too damp or dry. If you install the printer where
•
the temperature or humidity is outside the requirements in Table 1. 1 on page 1-3 in chapter
1, the best print quality may not be expected and there w ill be an increased chance of paper
jams.
Provide a sufficient clearances around the printer to ensure ventilation and ease of access.
•
See below.
&OHDUDQFH
Allow the necesary minimum clearance on all sides of the printer (below).
63#FP
63#FP
83#FP
93#FP
1-12
58#FP
)609<33
352'8&7# ,1)250$7,21
,QVWDOODWLRQ
3ODFHV#WR#DYRLG
Avoid installing the printer in locations exposed to:
Direct drafts of hot or cold air.
•
Direct drafts of outside air. (Avoid locations next to outside doors.)
•
Sudden temperature or humidity changes.
•
Any source of high heat, such as a radiator or stove.
•
Excessive dust. Dust and smoke may cause contamination on the laser scanner window,
•
causing print quality problem.
Vibration.
•
Ammonia fumes or other harmful fu mes. (In case of humi gating t he room or satura te it with
•
insecticide, remove the printer first.)
Avoid greenhouse-like rooms. (Because of sunlight and humidity.)
•
Avoid enclosed spaces that block ventilation.
•
Avoid sites more than 6500 feet or 2000 meters above sea level.
•
1RWHV#RQ#SRZHU
Use only the power source voltage conforming to the printer’s rated power voltage (See
•
Table 1. 1 on page 1-3). Do not use other power sources.
Disconnect the printer from the power source before attempting removal or re-placement of
•
an electrical component or a printed-circuit board.
The printer should not be connected to a power source until the instruction is given to do so
•
when performing tests described in this manual.
In connecting the printer power, exercise an extreme care in handling the power supply or
•
any other electric parts which may give an electric shock.
Before performing maintenance or repair, power from both the power source and the asso-
•
ciated peripheral devices (computer, sorter, etc.) should be disconnected, unless otherwise
specified.
To avoid possible electrical shock, extreme caution must be exercised in handling the
•
power cord and any other electrical part.
:DUQLQJ $V#WKH#GLVFRQQHFW#GHYLFH#LV#QRW#LQFRUSRUDWHG#LQ#WKH#SULQWHU*V#$&#SUL0
PDU\#FLUFXLW/#DQ#HDVLO\#DFFHVVLEOH#VRFNHW#RXWOHW#PXVW#EH#SURYLGHG#QHDU#
WKH#HTXLSPHQW1
)609<33
:RUQXQJ 'D#NHLQ#7UHQQVFKDOWHU#LQ#GHQ#:HFKVHOVWURP03ULPlUNUHLV#GHV#'UXFNHUV#
HLQJHEDXW#LVW/#PX‰#HLQH#OHLFKW#]XJlQJOLFKH#6WHFNGRVH#LQ#GHU#1lKH#GHV#
*HUlWHV#YRUKDQGHQ#VHLQ1
1-13
419 $ERXW#WKH#WRQHU
352'8&7# ,1)250$7,21
$ERXW#WKH#WRQHU
The printer should use Kyocera
Toner Kit. To ensure the high print quality and long ser-
TK-20
vice life, the following handling precautions should apply.
&DXWLRQ $V#WKH#(FRV\V#SULQWHUV#DUH#GHVLJQHG#WR#HQVXUH#WKH#RSWLPXP#SULQW#TXDO0
LW\#ZKHQ#XVHG#ZLWK#WKH#.\RFHUDtV#SURSULHWDU\#WRQHU/#.\RFHUD#GR#QRW#
UHFRPPHQG#WR#XVH#DQ\#UHILOOHG#WRQHU#FRQWDLQHUV#WKDW#PD\#EH#DYDLODEOH#
FRPPHUFLDOO\1#7KLV#LV#EHFDXVH#.\RFHUD#KDYH#QR#PHDQV#IRU#FRQWURO#RYHU#
KRZ#VXFK#UHILOOHG#WRQHU#FRXOG#DIIHFW#WKH#SULQW#TXDOLW\#DQG#WKH#UHOLDELO0
LW\#RI#WKH#SULQWHU1
7RQHU#FRQWDLQHU#KDQGOLQJ
To loosen and mix the toner inside, with the label side down, thoroughly shake the toner container (in the direction of the arrow) ten times or more.
:DUQLQJ 'R#QRW#DWWHPSW#WR#GLVDVVHPEOH#RU#UHILOO#WKH#WRQHU#FRQWDLQHU1
1-14
)609<33
352'8&7# ,1)250$7,21
$ERXW#WKH#WRQHU
7RQH U #VWRUDJH
The toner contained in the container is susceptible to temperature and humidity. To ensure the
high print quality, store the toner container in a place that satisfy the following environmental
conditions:
7DE OH #41#6## 7RQHU#VWRUDJH#FRQGLWLRQV
Temperature -20 to 40°C (-4 to 104°F)
Humidity 15 to 90 % RH
1RWH ,I#WKH#WRQHU#FRQWDLQHU#LV#UHPRYHG#IURP#WKH#SULQWHUtV#GHYHORSHU#XQLW/#
SXW#LW#LQ#D#SURWHFWLYH#EDJ#DQG#NHHS#LW#LQ#D#GDUN#SODFH1
&DXWLRQ ,I#WKH#SULQWHU#LV#VKLSSHG#IRU#UHWXUQ/#HWF1/#GR#QRW#VKLS#LW#ZLWK#WKH#WRQHU#
FRQWDLQHU#LQVWDOOHG1#2WKHUZLVH/#WRQHU#PD\#OHDN#DQG#FRQWDPLQDWLRQ#PD\#
UHVXOW#LQ#WKH#SULQWHU1
)609<33
1-15
This page left blank intentionally
352'8&7# ,1)250$7,21
$ERXW#WKH#WRQHU
1-16
)609<33
Loading...