Note: Depending on the specic model purchased, the color and look of your device and accessories may not exactly
match the graphics shown in this document.
❶
NFC sensor*
❷
Front camera lens*
❸
Light sensor*
❹
Power button
❺
Volume buttons
❻
Touch screen
❼
Microphone
❽
Memory card slot
❾
Rear camera lens*
❿
Flash*
⓫
Screw for cradle
⓬
Socket for cradle
⓭
Dock connector
⓮
Speaker
⓯
Micro-USB connector
*For selected models only
2
Charging the battery
Note: Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or
danger.
When charging the battery for the very rst time, you should charge it for at least 8
hours (using the AC charger) with your device turned off.
1. Push the tap outwards, plug the converter to the AC charger and then push the
tap inwards to lock the converter in place (
2. Open the connector cover on your device and connect the charger cable to the
Micro-USB connector (
❷
).
3. Plug the AC charger into a wall outlet (
❶
).
❸
).
3
CAUTION: For optimal performance of the lithium battery:
yDo not charge the battery where the temperature is high (e.g. in direct sunlight).
yRecharge the battery when it is nearly discharged. When recharging, make sure that the battery is fully charged.
Doing so can extend the battery life.
yIf you will not use the product for a long period of time (over one month) or nd the discharge/recharge time has
been shortened, be sure to fully discharge the battery rst before recharging it. You are also advised to fully
discharge and recharge the battery once every 1~2 months.
yFailure to follow the battery usage instructions could cause damage to your device, battery and even bodily injury
or property damage and will void the warranty.
Turning the device ON and OFF
1. Press and hold the Power button for about 2 seconds to turn on your device.
Wait for the boot screen to display.
2. The Home screen will display and the device is in Lock mode by default. Drag
the Lock icon (
3. To turn off the devide, press and hold the Power button until the option window
displays. Then tap Power off.
Note: You can also choose to restart the device by selecting Restart from the option window.
) upwards. The device is ready for use.
4
Sleep mode
Your device will automatically switch off the screen after 1 minute (by default) of
inactivity. You can manually switch off the screen by pressing the Power button
briey.
To resume the screen, press the Power button briey and then unlock the device
by dragging the Lock icon (
To change the settings, tap
) upwards.
on the desktop Settings Display Sleep.
Airplane mode
When you are in an airplane or in the area where data transferring is not allowed,
enable Airplane mode. You will be able to use many of your device’s applications
(such as playing games or listening music), but all wireless radios, including
wireless networks and Bluetooth, on the device are turned off – it cannot send or
receive data.
To enable Airplane mode: press and hold the Power button until the option window
displays. Then tap Airplane mode. The
Airplane mode is on.
To disable Airplane mode: tap
& networks, and tap the Airplane mode switch to turn it off.
on the desktop Settings More in Wirelss
icon in the status bar indicates that
Installing a memory card
CAUTION: Do not apply pressure to the center of the memory card.
Slide the cover latch to open the cover on the left side of the device to locate the
memory card slot. Noting the card orientation, hold the card (MicroSD) by the
edges and gently insert it into the slot.
To remove a card, rst unmount it from the device by tapping
Settings Storage & USB. Locate the desired storage item and tap
on the desktop
. Wait
5
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.