Misty AMRA12120EA User Manual
SAFETY DATA SHEET
A00121 MST AMMON GLASS CLNR 20net19
Version 1.1
Revision Date 02/17/2015
Print Date 10/14/2015
Material name
:
A00121 MST AMMON GLASS CLNR 20net19
Material number
:
000000000001001447
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Appearance
Aerosol containing a liquefied gas
Colour
clear
Odour
mint-like
Gases under pressure
:
Liquefied gas
Hazard pictograms
:
Signal word
:
Warning
Hazard statements
:
H280 Contains gas under pressure; may explode if heated.
Precautionary statements
:
Storage:
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
IARC
No component of this product present at levels greater than or
equal to 0.1% is identified as probable, possible or confirmed
human carcinogen by IARC.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS Label element
Potential Health Effects
Carcinogenicity:
1 / 9
SAFETY DATA SHEET
A00121 MST AMMON GLASS CLNR 20net19
Version 1.1
Revision Date 02/17/2015
Print Date 10/14/2015
ACGIH
Confirmed animal carcinogen with unknown relevance to
humans
ethanol
64-17-5
OSHA
No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
NTP
No component of this product present at levels greater than or
equal to 0.1% is identified as a known or anticipated carcinogen
by NTP.
Substance / Mixture
:
Mixture
Chemical Name
CAS-No.
Concentration [%]
butane
106-97-8
>= 1 - < 5
ethanol
64-17-5
>= 1 - < 5
General advice
:
Do not leave the victim unattended.
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
If inhaled
:
Remove to fresh air immediately. Get medical attention
immediately.
If unconscious place in recovery position and seek medical
advice.
In case of skin contact
:
Wash off immediately with plenty of water for at least 15
minutes.
Take off contaminated clothing and shoes immediately.
Get medical attention if irritation develops and persists.
Wash contaminated clothing before re-use.
In case of eye contact
:
In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes.
Remove contact lenses.
If eye irritation persists, consult a specialist.
If swallowed
:
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Suitable extinguishing media
:
Carbon dioxide (CO2)
Dry chemical
Alcohol-resistant foam
Water spray jet
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
SECTION 4. FIRST AID MEASURES
SECTION 5. FIREFIGHTING MEASURES
2 / 9
SAFETY DATA SHEET
A00121 MST AMMON GLASS CLNR 20net19
Version 1.1
Revision Date 02/17/2015
Print Date 10/14/2015
Unsuitable extinguishing
media
:
High volume water jet
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Use a water spray to cool fully closed containers.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Ensure adequate ventilation.
Refer to protective measures listed in sections 7 and 8.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.
Always replace cap after use.
Take precautionary measures against static discharges.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
Keep in a dry, cool and well-ventilated place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
3 / 9
Loading...