Misty 1038771 User Manual
SAFETY DATA SHEET
BL0823 MST REDI-STEAM 4/1GLL
Version 1.0
Revision Date 06/22/2015
Print Date 10/14/2015
Material name
:
BL0823 MST REDI-STEAM 4/1GLL
Material number
:
000000000001038771
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Appearance
liquid
Colour
green
Odour
pleasant
IARC
No component of this product present at levels greater than or
equal to 0.1% is identified as probable, possible or confirmed
human carcinogen by IARC.
ACGIH
No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH.
OSHA
No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
NTP
No component of this product present at levels greater than or
equal to 0.1% is identified as a known or anticipated carcinogen
by NTP.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
Not a dangerous substance or mixture according to the Globally Harmonised System (GHS).
GHS Label element
Not a dangerous substance or mixture according to the Globally Harmonised System (GHS).
Potential Health Effects
Carcinogenicity:
1 / 8
SAFETY DATA SHEET
BL0823 MST REDI-STEAM 4/1GLL
Version 1.0
Revision Date 06/22/2015
Print Date 10/14/2015
Substance / Mixture
:
Mixture
Chemical Name
CAS-No.
Concentration [%]
sodium dodecyl sulphate
151-21-3
>= 1 - <= 3
General advice
:
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area.
Do not leave the victim unattended.
If inhaled
:
Remove person to fresh air. If signs/symptoms continue, get
medical attention.
In case of skin contact
:
Flush skin with large amounts of water. If irritation develops
and persists, get medical attention.
Take off contaminated clothing and shoes immediately.
In case of eye contact
:
In case of eye contact, remove contact lens and rinse
immediately with plenty of water, also under the eyelids, for at
least 15 minutes.
If swallowed
:
Rinse mouth with water.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
If symptoms persist, call a physician.
Suitable extinguishing media
:
Water spray jet
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
:
None known.
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Sulphur oxides
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
SECTION 4. FIRST AID MEASURES
SECTION 5. FIREFIGHTING MEASURES
2 / 8
SAFETY DATA SHEET
BL0823 MST REDI-STEAM 4/1GLL
Version 1.0
Revision Date 06/22/2015
Print Date 10/14/2015
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
:
Use non-slip safety shoes in areas where spills or leaks can
occur.
Evacuate personnel to safe areas.
Use personal protective equipment.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
Do not allow uncontrolled discharge of product into the
environment.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Advice on safe handling
:
Wear personal protective equipment.
Smoking, eating and drinking should be prohibited in the
application area.
For personal protection see section 8.
Conditions for safe storage
:
Store in original container.
Keep in a dry, cool and well-ventilated place.
Keep container closed when not in use.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Materials to avoid
:
No materials to be especially mentioned.
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory
equipment.
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection
:
Ensure that eyewash stations and safety showers are close to
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipment
Hand protection
3 / 8
Loading...