Misty 1001907 User Manual

SAFETY DATA SHEET
Misty(R) Disinfectant Foam Cleaner
Version 1.2
Print Date 05/08/2017
Material name
:
Misty(R) Disinfectant Foam Cleaner
EPA ID Number:
10807-21 Material number
:
000000000001001907
Company
:
Amrep, Inc.
Address
:
990 Industrial Park Drive Marietta, GA 30062
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded. In the District of Columbia 202-483-7616
Recommended use
:
Disinfectant Appearance
Aerosol containing a liquefied gas
Colour
white
Odour
pleasant
Gases under pressure
:
Liquefied gas
Skin corrosion
:
Category 1A
Serious eye damage
:
Category 1
Hazard pictograms
:
Signal word
:
Danger
Hazard statements
:
H280 Contains gas under pressure; may explode if heated. H314 Causes severe skin burns and eye damage.
Precautionary statements
:
Prevention: P260 Do not breathe dust or mist. P264 Wash skin thoroughly after handling.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS label elements
1 / 12
SAFETY DATA SHEET
Misty(R) Disinfectant Foam Cleaner
Version 1.2
Print Date 05/08/2017
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response:
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. P363 Wash contaminated clothing before reuse. Storage: P405 Store locked up. P410 + P403 Protect from sunlight. Store in a well-ventilated place. Disposal: Dispose of contents/container in accordance with local regulation.
Substance / Mixture
:
Mixture
Chemical name
CAS-No.
Concentration [%]
butane
106-97-8
>= 1 - < 5
2-butoxyethanol
111-76-2
>= 1 - < 5
2-(2-ethoxyethoxy)ethanol
111-90-0
>= 1 - < 5
tetrasodium ethylenediaminetetraacetate
64-02-8
>= 1 - < 5
propane
74-98-6
>= 1 - < 5
General advice
:
Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended.
If inhaled
:
If unconscious place in recovery position and seek medical advice. Consult a physician after significant exposure. Move to fresh air.
In case of skin contact
:
If skin irritation persists, call a physician. Wash off immediately with plenty of water for at least 15 minutes. If on clothes, remove clothes. Wash contaminated clothing before re-use.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
2 / 12
SAFETY DATA SHEET
Misty(R) Disinfectant Foam Cleaner
Version 1.2
Print Date 05/08/2017
In case of eye contact
:
Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
If swallowed
:
Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. DO NOT induce vomiting unless directed to do so by a physician or poison control center.
Suitable extinguishing media
:
Alcohol-resistant foam Dry chemical Carbon dioxide (CO2) Water spray
Unsuitable extinguishing media
:
High volume water jet
Specific hazards during firefighting
:
Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous combustion products
:
Carbon dioxide (CO2) Carbon monoxide Smoke
Specific extinguishing methods
:
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Further information
:
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. For safety reasons in case of fire, cans should be stored separately in closed containments. Use water spray to cool unopened containers.
Special protective equipment for firefighters
:
Wear self-contained breathing apparatus for firefighting if necessary.
Personal precautions, protective equipment and emergency procedures
:
Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas. Remove all sources of ignition. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
:
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
SECTION 5. FIREFIGHTING MEASURES
SECTION 6. ACCIDENTAL RELEASE MEASURES
3 / 12
SAFETY DATA SHEET
Misty(R) Disinfectant Foam Cleaner
Version 1.2
Print Date 05/08/2017
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and materials for containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Sweep up or vacuum up spillage and collect in suitable container for disposal.
Advice on safe handling
:
Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Always replace cap after use. Avoid exposure - obtain special instructions before use. Do not breathe vapours or spray mist.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 °C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Observe label precautions. Keep in a dry, cool and well-ventilated place. Electrical installations / working materials must comply with the technological safety standards.
Materials to avoid
:
Strong oxidizing agents
Storage temperature
:
4.4 - 49 °C
Components
CAS-No.
Value type (Form of exposure)
Control parameters / Permissible concentration
Basis
butane
106-97-8
TWA
800 ppm 1,900 mg/m3
NIOSH REL
TWA
800 ppm 1,900 mg/m3
OSHA P0
2-butoxyethanol
111-76-2
TWA
20 ppm
ACGIH
TWA
5 ppm 24 mg/m3
NIOSH REL
TWA
50 ppm 240 mg/m3
OSHA Z-1
TWA
25 ppm 120 mg/m3
OSHA P0
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
4 / 12
Loading...
+ 8 hidden pages