Misty 1001611 User Manual
SAFETY DATA SHEET
A00173 MST HD CARPET SPOT RMVR 20net19
Version 3.0
Revision Date 10/13/2015
Print Date 10/22/2015
Material name
:
A00173 MST HD CARPET SPOT RMVR 20net19
Material number
:
000000000001001611
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Appearance
Aerosol containing a liquefied gas
Colour
clear
Odour
characteristic
Gases under pressure
:
Liquefied gas
Eye irritation
:
Category 2A
Hazard pictograms
:
Signal word
:
Warning
Hazard statements
:
H280 Contains gas under pressure; may explode if heated.
H319 Causes serious eye irritation.
Precautionary statements
:
Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear eye protection/ face protection.
Response:
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/
attention.
Storage:
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS Label element
1 / 12
SAFETY DATA SHEET
A00173 MST HD CARPET SPOT RMVR 20net19
Version 3.0
Revision Date 10/13/2015
Print Date 10/22/2015
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
IARC
No component of this product present at levels greater than or
equal to 0.1% is identified as probable, possible or confirmed
human carcinogen by IARC.
ACGIH
No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH.
OSHA
No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
NTP
No component of this product present at levels greater than or
equal to 0.1% is identified as a known or anticipated carcinogen
by NTP.
Substance / Mixture
:
Mixture
Chemical Name
CAS-No.
Concentration [%]
butane
106-97-8
>= 5 - < 10
propan-2-ol
67-63-0
>= 5 - < 10
2-(2-butoxyethoxy)ethanol
112-34-5
>= 5 - < 10
acetone
67-64-1
>= 1 - < 5
D-Glucopyranose, oligomers, decyl octyl
glycosides
68515-73-1
>= 1 - < 5
1-phenoxypropan-2-ol
770-35-4
>= 1 - < 5
propane
74-98-6
>= 1 - < 5
D-Glucopyranose, oligomeric, C10-16-alkyl
glycosides
110615-47-9
>= 1 - < 5
sodium nitrite
7632-00-0
>= 0.1 - < 1
General advice
:
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled
:
If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
In case of contact, immediately flush eyes or skin with plenty
of water for at least 15 minutes while removing contaminated
clothing and shoes.
Wash contaminated clothing before re-use.
Call a physician if irritation develops or persists.
Potential Health Effects
Carcinogenicity:
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
SECTION 4. FIRST AID MEASURES
2 / 12
SAFETY DATA SHEET
A00173 MST HD CARPET SPOT RMVR 20net19
Version 3.0
Revision Date 10/13/2015
Print Date 10/22/2015
In case of eye contact
:
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If in eyes, rinse with water for 15 minutes.
If swallowed
:
Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
If symptoms persist, call a physician.
Suitable extinguishing media
:
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Water spray jet
Unsuitable extinguishing
media
:
High volume water jet
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Standard procedure for chemical fires.
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
:
Soak up with inert absorbent material (e.g. sand, silica gel,
SECTION 5. FIREFIGHTING MEASURES
SECTION 6. ACCIDENTAL RELEASE MEASURES
3 / 12
SAFETY DATA SHEET
A00173 MST HD CARPET SPOT RMVR 20net19
Version 3.0
Revision Date 10/13/2015
Print Date 10/22/2015
containment and cleaning up
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Always replace cap after use.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Observe label precautions.
Keep in a dry, cool and well-ventilated place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Strong oxidizing agents
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
butane
106-97-8
TWA
800 ppm
1,900 mg/m3
NIOSH REL
TWA
800 ppm
1,900 mg/m3
OSHA P0
propan-2-ol
67-63-0
TWA
200 ppm
ACGIH
STEL
400 ppm
ACGIH
TWA
400 ppm
980 mg/m3
NIOSH REL
ST
500 ppm
1,225 mg/m3
NIOSH REL
TWA
400 ppm
980 mg/m3
OSHA Z-1
TWA
400 ppm
980 mg/m3
OSHA P0
STEL
500 ppm
1,225 mg/m3
OSHA P0
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
4 / 12
Loading...