Misty 1001557 User Manual

SAFETY DATA SHEET

A00142 MST PAINLESS STAINLESS 20net18

Version 3.3

Revision Date 12/22/2016

Print Date 05/05/2017

Material name

:

A00142 MST PAINLESS STAINLESS 20net18
Material number

:

000000000001001557

Company

:

Zep Inc.

Address

:

1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Recommended use

:

Cleaner
Appearance

Aerosol containing a liquefied gas

Colour

light cream

Odour

characteristic

Gases under pressure

:

Liquefied gas

Skin sensitisation

:

Category 1

Hazard pictograms

:

Signal word

:

Warning

Hazard statements

:

H280 Contains gas under pressure; may explode if heated.
H317 May cause an allergic skin reaction.

Precautionary statements

:

Prevention:
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P272 Contaminated work clothing should not be allowed out of
the workplace.
P280 Wear protective gloves.

Response:

P302 + P352 IF ON SKIN: Wash with plenty of soap and water.

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

Recommended use of the chemical and restrictions on use

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

GHS label elements

1 / 12

SAFETY DATA SHEET

A00142 MST PAINLESS STAINLESS 20net18

Version 3.3

Revision Date 12/22/2016

Print Date 05/05/2017

P333 + P313 If skin irritation or rash occurs: Get medical
advice/ attention.
P363 Wash contaminated clothing before reuse.
Storage:
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
Disposal:
Dispose of contents/container in accordance with local
regulation.

Substance / Mixture

:

Mixture

Chemical name

CAS-No.

Concentration [%]

Distillates (petroleum), hydrotreated light

64742-47-8

>= 10 - < 20

propane

74-98-6

>= 5 - < 10

butane

106-97-8

>= 1 - < 5

Naphtha (petroleum), hydrotreated light

64742-49-0

>= 1 - < 5

Solvent naphtha (petroleum), heavy aliph.

64742-96-7

>= 1 - < 5

citral

5392-40-5

>= 0.1 - < 1

General advice

:

Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.

If inhaled

:

If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.

In case of skin contact

:

If skin irritation persists, call a physician.
Wash off immediately with plenty of water for at least 15
minutes.
If on clothes, remove clothes.

In case of eye contact

:

Rinse immediately with plenty of water for at least 15 minutes.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.

If swallowed

:

Keep respiratory tract clear.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.

Most important symptoms
and effects, both acute and
delayed

:

Effects are immediate and delayed.
Symptoms may include irritation, redness, pain, and rash.
Causes skin irritation.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

The exact percentages of disclosed substances are withheld as trade secrets.

SECTION 4. FIRST AID MEASURES

2 / 12

SAFETY DATA SHEET

A00142 MST PAINLESS STAINLESS 20net18

Version 3.3

Revision Date 12/22/2016

Print Date 05/05/2017

Review section 2 of SDS to see all potential hazards.

Notes to physician

:

Treat symptomatically. Symptoms may be delayed.

Suitable extinguishing media

:

Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Water spray jet

Unsuitable extinguishing
media

:

High volume water jet

Specific hazards during
firefighting

:

Do not allow run-off from fire fighting to enter drains or water
courses.

Hazardous combustion
products

:

Carbon dioxide (CO2)
Carbon monoxide
Smoke

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Ensure adequate ventilation.
Remove all sources of ignition.

Environmental precautions

:

Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.

Methods and materials for
containment and cleaning up

:

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.

SECTION 5. FIREFIGHTING MEASURES

SECTION 6. ACCIDENTAL RELEASE MEASURES

3 / 12

SAFETY DATA SHEET

A00142 MST PAINLESS STAINLESS 20net18

Version 3.3

Revision Date 12/22/2016

Print Date 05/05/2017

Advice on safe handling

:

Do not breathe vapours or spray mist.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.

Conditions for safe storage

:

BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Keep in a dry, cool and well-ventilated place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.

Materials to avoid

:

Oxidizing agents

Components

CAS-No.

Value type
(Form of
exposure)

Control
parameters /
Permissible
concentration

Basis

Distillates (petroleum),
hydrotreated light

64742-47-8

TWA

500 ppm
2,000 mg/m3

OSHA Z-1

TWA

400 ppm
1,600 mg/m3

OSHA P0

TWA (Mist)

5 mg/m3

OSHA Z-1

TWA (Mist)

5 mg/m3

OSHA P0

TWA (Mist)

5 mg/m3

NIOSH REL

ST (Mist)

10 mg/m3

NIOSH REL

PEL
(particulate)

5 mg/m3

CAL PEL

propane

74-98-6

TWA

1,000 ppm

ACGIH

TWA

1,000 ppm
1,800 mg/m3

NIOSH REL

TWA

1,000 ppm
1,800 mg/m3

OSHA Z-1

TWA

1,000 ppm
1,800 mg/m3

OSHA P0

PEL

1,000 ppm
1,800 mg/m3

CAL PEL

butane

106-97-8

TWA

800 ppm
1,900 mg/m3

NIOSH REL

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

4 / 12